首页 | 本学科首页   官方微博 | 高级检索  
     检索      

圆形重力式网箱阻力性能研究
引用本文:王鲁民,黄洪亮,王明彦.圆形重力式网箱阻力性能研究[J].中国海洋大学学报(自然科学版),2004,34(4):555-559.
作者姓名:王鲁民  黄洪亮  王明彦
作者单位:1. 农业部海洋与河口渔业重点开放实验室,上海,200090;中国水产科学研究院东海水产研究所,上海,200090
2. 中国水产科学研究院东海水产研究所,上海,200090
基金项目:国家“十五”科技攻关项目 (2 0 0 1 BA5 0 5 B0 2 0 2 )资助
摘    要:采用网箱模型试验 ,对周长 5 0 m,深 8m的 HDPE双管圆形重力式网箱 ,在不同配重、网片规格和流速条件下的阻力性能进行研究。结果表明 ,在 2 .5 kn的相对流速范围内 ,网箱的整体阻力在 75 0 0 kg以内 ;在网箱整体阻力中 ,框架及重锤阻力所占比重较小 ,而网箱箱体阻力占近90 %。不同重锤配重的网箱 ,其整体阻力与流速均呈幂函数关系 F=a Vb,网箱重锤配重增加 ,网箱阻力也随之增大 ,而重锤配重变化对网箱阻力的影响程度又随流速的增加而减小

关 键 词:重力式网箱  圆形  模型试验  阻力
文章编号:1672-1574(2004)04-555-05
修稿时间:2003年11月20

Hydraulic Resistance of Gravity Cage with Cylinderical Shape
WANG Lu min ,HUANG Hong liang ,WANG Ming yan.Hydraulic Resistance of Gravity Cage with Cylinderical Shape[J].Periodical of Ocean University of China,2004,34(4):555-559.
Authors:WANG Lu min    HUANG Hong liang    WANG Ming yan
Institution:WANG Lu min 1,2,HUANG Hong liang 1,2,WANG Ming yan 2
Abstract:The hydraulic resistance of gravity cage, which is cylinderical shape with a perimeters of 50m and a depth of 8m, is tested by using a cage model in a flume tank. The results show that the hydraulic resistance of gravity cage is below 7 500kg, when the velocity of flow is lower than 2.5kn. The resistance of gravity cage is mainly caused by the section of the net, which accounts for about 88% of the whole resistance, When the gravity cage is equipped with aplummet of different weight, the relation between hydraulic resistance and velocity of flow is F=aV b , and the hydraulic resistance of gravity cage increases with the increasing of the plummet weight. However, the incidence that the weight affect on the cage resistance decreases along with the increasing of the velocity of water flow.
Keywords:gravity cage  cylinder  model test  hydraulic resistance
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号