| Integration of Real-Time Chemical Sensors for Deep Sea Research |
| |
| 作者姓名： | 陈鹰 叶瑛 杨灿军 |
| |
| 作者单位： | [1]TheStateKeylaboratoryofFluidPowerandTransmissionControl,ZhejiangUniversity,Hangzhou310027,China [2]DepartmentofGeo-Science,ZhejiangUniversity,Hangzhou310027,China |
| |
| 基金项目： | The research program was financially supported by the Joint Program of Chinese 863 Project (Grant No. 2001AA612020 4) and the sea trial support from COMRA, China Ocean Mineral Research and Exploitation Association as well. |
| |
| 摘 要： | There is a great demand for in-situ real-time chemical sensors in the oceanographic research, to measure the chemical components under the deep sea. The ISE (Ion Selective Electrode) is commonly used as a detecting part of deep-sea electro-chemical sensors. The paper highlights the solidification and micromation of the working and reference electrodes. The sensors of pH and H2S with a thermal probe are accomphshed after the solution of configuration of electrodes and signal processing. The sensor system has been tested successfully in the cruise of DY105-12, 14 sponsored by China Ocean Mineral Research and Exploitation Association(COMRA).
|
| 关 键 词： | 深海海域 电化学传感器 实时监测 DY105-12 信号处理 |
Integration of Real-Time Chemical Sensors for Deep Sea Research |
| |
| CHEN Ying a,YE Ying b and YANG Can-jun aaThe State Key Laboratory of Fluid Power and Transmission Control,Zhejiang University,Hangzhou ,Chinab.Integration of Real-Time Chemical Sensors for Deep Sea Research[J].China Ocean Engineering,2005,19(1):129-137. |
| |
| Authors: | CHEN Ying a YE Ying b and YANG Can-jun aaThe State Key Laboratory of Fluid Power and Transmission Control Zhejiang University Hangzhou Chinab |
| |
| Institution: | CHEN Ying a,YE Ying b and YANG Can-jun aaThe State Key Laboratory of Fluid Power and Transmission Control,Zhejiang University,Hangzhou 310027,ChinabDepartment of Geo-Science,Zhejiang University,Hangzhou 310027,China |
| |
| Abstract: | There is a great demand for in-situ real-time chemical sensors in the oceanographic research, to measure the chemical components under the deep sea. The ISE (Ion Selective Electrode) is commonly used as a detecting part of deep-sea electro-chemical sensors. The paper highlights the solidification and micromation of the working and reference electrodes. The sensors of pH and H 2S with a thermal probe are accomplished after the solution of configuration of electrodes and signal processing. The sensor system has been tested successfully in the cruise of DY105-12, 14 sponsored by China Ocean Mineral Research and Exploitation Association(COMRA). |
| |
| Keywords: | deep sea electro-chemical sensor real time |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《中国海洋工程》浏览原始摘要信息 |
| 点击此处可从《中国海洋工程》下载免费的PDF全文 |
