| 用于海底目标识别与底质分类的多波束水体波形预处理 |
| |
| 引用本文： | 张目宁,杨鲲,吴永亭,柳义成,曹玉芬,阳凡林.用于海底目标识别与底质分类的多波束水体波形预处理[J].海洋通报,2021(1). |
| |
| 作者姓名： | 张目宁 杨鲲 吴永亭 柳义成 曹玉芬 阳凡林 |
| |
| 作者单位： | 山东科技大学 测绘科学与工程学院，山东 青岛 266590； 自然资源部海洋测绘重点实验室，山东 青岛 266590;交通运输部天津水运工程科学研究院，天津 300000;自然资源部第一海洋研究所，山东 青岛 266061 |
| |
| 基金项目： | 国家自然基金重点项目 （41930535）；国家重点研发计划 （2018YFF0212203；2017YFC1405006；2018YFC1405900）；山东科技大学科研创新团队支持计划 （2019TDJH103） |
| |
| 摘 要： | 多波束水体数据是多波束系统获取的最原始数据,记录了波束从发射到接收整个过程全部的反向散射强度信息,可以为目标识别、水下栖息环境探测等提供重要的数据支撑。目前,针对多波束水体强度时间序列所表现的波形信息的处理及研究仍处于起步阶段,另外水体波形数据易受噪声影响,且存在明显的入射角效应问题,对此,本文提出了一种基于分区异构的多波束水体波形拟合算法。首先,根据不同波束入射角范围的水体波形特性,将水体数据划分为3个区域;然后利用不同函数(中央波束区域—双指数函数、漫反射区域—广义高斯与线性函数叠加、边缘波束区域—高斯与多项式叠加)分别对不同分区的反向散射强度波形进行拟合。采用台湾海峡的多波束水体数据进行验证,结果表明:不同分区拟合相关系数及拟合优度均达到0.95以上,相比简单函数拟合,均方根误差由3.39 dB降到1.5 dB以下,达到了较好的拟合效果,可为多波束水体目标识别和海底分类提供参考。
|
| 关 键 词： | 多波束水体数据 波形去噪 分区波形拟合 双指数拟合 |
| 收稿时间： | 2020/7/14 0:00:00 |
| 修稿时间： | 2020/11/25 0:00:00 |
Multi-beam water columndata processing method for target recognition and classification of seabed sediments |
| |
| ZHANG Muning,YANG Kun,WU Yongting,LIU Yicheng,CAO Yufen,YANG Fanlin.Multi-beam water columndata processing method for target recognition and classification of seabed sediments[J].Marine Science Bulletin,2021(1). |
| |
| Authors: | ZHANG Muning YANG Kun WU Yongting LIU Yicheng CAO Yufen YANG Fanlin |
| |
| Institution: | College of Geodesy and Geomatics, Shandong University of Science and Technology, Qingdao 266590, China; Key Laboratory of Oceanic Surveying and Mapping, Ministry of Natural Resources, Qingdao 266590, China;Tianjin Research Institute for Water Transport Engineering, Ministry of Transport, Tianjin 300000, China;First Institute of Oceanography, Ministry of Natural Resources, Qingdao 266061, China |
| |
| Abstract: | Multi-beam water column data is the most original data obtained by multi-beam echo soundersystem. It records all the backscattering intensity information of the entire process from transmission to reception, providing important support for target recognition and underwater habitat detection. At present, the processing and research of the waveform information represented bymulti-beam water columntimeseriesintensity is still in its infancy. In addition, the waveform of water column data are easily affected by noise and have obvious incident angle effect. This paper proposes a multi-beam water column data waveform fitting algorithm based on partitioned heterogeneity. First of all, according to the water column waveform characteristics of different beam incidence angle ranges, the water column data is divided into 3 areas. Secondly, the backscattering intensities of different partitions are respectively fitted with different functions (central beam area-double exponential function,diffuse reflection area-superposition of generalized Gaussian function and linear function, edge beam area -Gaussian and polynomial superposition). The proposed algorithm was verified by using multi -beam water data collected in the Taiwan Strait. Experiments show that the correlation coefficient and goodness-of-fit are above 0.95. Compared with simple function fitting, the root-mean-square error is reduced from 3.39 dB to less than 1.5 dB, suggesting a good fit. The algorithm provides an effective basis for the extraction of waveform features of the water column, and has certain application potential in the
identification of bottom targets and the classification of seabed. |
| |
| Keywords: | multi-beam water columndata waveform fitting zonal waveform fitting double exponential fitting |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《海洋通报》浏览原始摘要信息 |
| 点击此处可从《海洋通报》下载免费的PDF全文 |
|
