首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于对偶加权后验误差估计的2.5维直流电阻率自适应有限元正演
引用本文:严波,刘颖,叶益信.基于对偶加权后验误差估计的2.5维直流电阻率自适应有限元正演[J].物探与化探,2014(1):145-150.
作者姓名:严波  刘颖  叶益信
作者单位:中国海洋大学海底科学与探测技术教育部重点实验室,山东青岛266100
基金项目:国家自然科学基金(41204055,41130420)
摘    要:采用易于模拟复杂地形起伏和倾斜界面的非结构三角单元剖分网格,并利用对偶加权后验误差估计指导网格自动细化过程,实现了2.5维直流电阻率法自适应有限元数值模拟。在实例模型分析中,分别计算了层状模型和垂直岩脉模型的直流电阻率响应,并与其解析解进行了比较。对比结果表明,该算法所得数值解精度很高,解的相对误差小于0.5%。最后,计算了起伏地形2.5维地电模型视电阻率异常,并利用比较法进行了地形改正。地形改正结果与水平地形时的结果对比表明,比较法可以较好地消除地形影响,突出局部地质体异常。

关 键 词:直流电阻率  自适应有限元法  地形改正  .维  后验误差估计

2.5D DIRECT CURRENT RESISTMTY ADAPTIVE FINITE-ELEMENT NUMERICAL MODELING BASED ON DUAL WEIGHTED POSTERIORI ERROR ESTIMATION
YAN Bo,LIU Ying,YE Yi-xin.2.5D DIRECT CURRENT RESISTMTY ADAPTIVE FINITE-ELEMENT NUMERICAL MODELING BASED ON DUAL WEIGHTED POSTERIORI ERROR ESTIMATION[J].Geophysical and Geochemical Exploration,2014(1):145-150.
Authors:YAN Bo  LIU Ying  YE Yi-xin
Institution:( Key Laboratory for Submarine Science and Exploration Technology of Ministry of Educatiou, Ocean University of China, Qingdao 266100, China )
Abstract:2.5D DC resistivity modeling was realized by adaptive finite-element numerical simulation algorithm. This algorithm uses un-structured triangular element that is easy to simulate complex topography and inclined interface to subdivide mesh, and utilizes dual weighted posteriori error estimation guide mesh refining process. In the instance model analysis, the authors calculated the DC resistivity response of the layered model and the vertical dike model, which were compared with their analytical solutions respectively. The results show that the numerical solution for this algorithm has high accuracy,and the relative error of the numerical solution is less than 5 percent. Finally, the authors calculated 2.5D geoelectric model apparent resistivity anomaly of undulate topography and corrected the undulate to-pography by using the comparative method. The contrast between topographic correction results and level terrain results show that the com-parative method is effective in eliminating the terrain effect and giving prominence to local geological anomalies.
Keywords:DC resistivity  adaptive finite-element  topographic correction  2  5D  posteriori error estimation
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号