| 砂土与钢材接触面剪切特性试验对比研究 |
| |
| 引用本文： | 杨大方,刘希亮,何军.砂土与钢材接触面剪切特性试验对比研究[J].岩土工程技术,2009,23(3):119-121,126. |
| |
| 作者姓名： | 杨大方 刘希亮 何军 |
| |
| 作者单位： | 河南理工大学土木工程学院,河南焦作,454003 |
| |
| 基金项目： | 河南省自然科学基金，河南省杰出青年科学基金 |
| |
| 摘 要： | 为了研究砂土与钢材接触界面剪切特性，对原有的及改装后的DSJ-2型电动四联等应变直剪仪上分别进行了砂土同钢材界面的单剪试验和直剪试验，并做了对比分析。研究结果表明：1）单剪试验下在法向应力50kPa、100kPa时，砂土与钢材界面的剪应力-剪切位移关系曲线呈非线性弹性理想塑性关系，在法向应力200kPa、400kPa时呈刚塑性关系。直剪试验下在法向应力50kPa、100kPa时，砂土与钢材界面的剪应力-剪切位移关系曲线呈非线性关系，在法向应力200kPa、400kPa时呈双曲线关系；2）提出了界面抗剪强度指标的经验换算公式（直剪试验下得到的界面抗剪强度指标乘以一个小于1的系数），以修正应用于设计的直剪试验结果。
|
| 关 键 词： | 接触面 剪切特性 单剪试验 直剪试验 |
Comparative Study of Shear Test Between Sand and Steel |
| |
| Yang Dafang,Liu Xiliang,He Jun.Comparative Study of Shear Test Between Sand and Steel[J].Geotechnical Engineering Technique,2009,23(3):119-121,126. |
| |
| Authors: | Yang Dafang Liu Xiliang He Jun |
| |
| Institution: | (School of Civil Engineering Collge, Henan Polytechnic University , Jiaozuo 454003, Henan, China) |
| |
| Abstract: | In order to study the shear properties of the interface between the sand and steel, the result of a series simple shear test and direct shear test of interface between dry, saturated sand and smooth, rough steel on the DSJ--2 electric four-joint equal stress direct shear apparatus and after reffitted is constrastively analyzed. The result shows that the shear stess--shear displacement curve of interfaces presents misalignment elastic ideal plasticity relations when the vertical stress is 50,100kPa or presents rigidity-plasticity relations when the vertical stress is 200,400kPa with the simple shear test, the shear stess-shear displacement curve of interfaces presents misalignment relations when the vertical stress is 50,100kPa or presents hyperbolic curve relations when the vertical stress is 200,400kPa with the direct shear test. In addition, the experience reduction formula of contact surface shearing strength target（the interface shear strength index with the direct shear test multiplied by a factor less than 1）are proposed to revise the direct shear test result in design. |
| |
| Keywords: | interface shear characteristic simple shear test direct shear test |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
