首页 | 本学科首页   官方微博 | 高级检索  
     检索      

粒度不均匀铬矿石取样代表性的研究
引用本文:刘青山,靳宏,臧世阳,孙世明,王兆瑞,安鹏升.粒度不均匀铬矿石取样代表性的研究[J].岩矿测试,2012,31(6):997-999.
作者姓名:刘青山  靳宏  臧世阳  孙世明  王兆瑞  安鹏升
作者单位:天津出入境检验检疫局化矿金检测中心,天津,300456
基金项目:国家质检总局科技计划项目(2008IK265)
摘    要:以一批进口土耳其铬矿石为例,对所取的40个样品进行0~ 10 mm、10 ~ 50 mm、50 ~ 150 mm、150~ 250 mm及大于250 mm五个区间的粒度筛分,分析粒度不均匀的铬矿石在各粒度区间内组分含量和所占质量百分比的差异情况.根据分析结果对40个样品在50 ~ 150 mm区间内的质量百分比与样品总组分含量进行相关性分析,结果表明:两者的相关系数为0.466,相关系数的显著性概率为0.002,小于0.01,说明在50~150 mm粒度区间内矿石的质量百分比与样品的总含量的相关性是高度显著的,提出为了提高粒度不均匀的铬矿石取样代表性,应首先保证在所含矿石质量百分比与总组分含量相关性最大的粒度区间内(50 ~ 150 mm),所取矿石样品与实际货物中矿石的质量百分比相一致.

关 键 词:铬矿石  粒度不均匀  组分含量  取样代表性
收稿时间:2/8/2012 12:00:00 AM
修稿时间:5/3/2012 12:00:00 AM

A Study on the Representativeness of Sampling for Non-uniform Particle Size Chrome Ore
LIU Qing-shan,JIN Hong,ZANG Shi-yang,SUN Shi-ming,WANG Zhao-rui and AN Peng-sheng.A Study on the Representativeness of Sampling for Non-uniform Particle Size Chrome Ore[J].Rock and Mineral Analysis,2012,31(6):997-999.
Authors:LIU Qing-shan  JIN Hong  ZANG Shi-yang  SUN Shi-ming  WANG Zhao-rui and AN Peng-sheng
Institution:Chemicals, Minerals & Materials Inspection Center, Tianjin Entry-Exit Inspection and Quarantine Bureau, Tianjin 300456, China;Chemicals, Minerals & Materials Inspection Center, Tianjin Entry-Exit Inspection and Quarantine Bureau, Tianjin 300456, China;Chemicals, Minerals & Materials Inspection Center, Tianjin Entry-Exit Inspection and Quarantine Bureau, Tianjin 300456, China;Chemicals, Minerals & Materials Inspection Center, Tianjin Entry-Exit Inspection and Quarantine Bureau, Tianjin 300456, China;Chemicals, Minerals & Materials Inspection Center, Tianjin Entry-Exit Inspection and Quarantine Bureau, Tianjin 300456, China;Chemicals, Minerals & Materials Inspection Center, Tianjin Entry-Exit Inspection and Quarantine Bureau, Tianjin 300456, China
Abstract:Forty samples of imported Turkish chrome ore were classified into five size groups (0-10 mm, 10-50 mm, 50-150 mm, 150-250 mm and greater than 250 mm) in which the difference of constituent contents and weight proportions were studied. The relevance of weight proportions in the 50-150 mm particles and constituent contents of the 40 samples was studied. The results show a correlation coefficient of 0.466 and a significance probability of 0.002, which indicates a highly significant correlation between them. Therefore, in order to improve the representativeness of sampling, the weight proportions in the 50-150 mm particle group should be correlated between the sampling ore samples and the actual cargo.
Keywords:chrome ore  non-uniform particle size  constituent content  representativeness of sampling
本文献已被 万方数据 等数据库收录!
点击此处可从《岩矿测试》浏览原始摘要信息
点击此处可从《岩矿测试》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号