| Rietveld全图拟合法定量分析伊利石矿的精确度及误差来源 |
| |
| 引用本文： | 陈爱清,张立雪,李强,朱建喜,李尚颖,何宏平.Rietveld全图拟合法定量分析伊利石矿的精确度及误差来源[J].岩矿测试,2022(2):291-299. |
| |
| 作者姓名： | 陈爱清 张立雪 李强 朱建喜 李尚颖 何宏平 |
| |
| 作者单位： | 三峡大学分析测试中心, 湖北 宜昌 443002;中国地质调查局广州海洋地质调查局, 广东 广州 510075;中国科学研究院广州地球化学研究所, 广东 广州 510640;南方科技大学环境科学与工程学院, 广东 深圳 518055 |
| |
| 基金项目： | 国家自然科学基金项目(41530313,41772039);中国科学院前沿科学重点研究项目(QYZDJ-SSW-DQC023);广东省科技计划项目(2020B1212060055);中国博士后科学基金资助项目(2021M701562) |
| |
| 摘 要： | 伊利石是一种重要的矿产资源，准确获得矿石中矿物组成和含量具有重要的理论和实际意义。Rietveld全图拟合法采用整个衍射图进行分析，具有较高的准确度。然而由于缺少纯的伊利石样品，目前对于该方法在分析伊利石矿样的精确度和误差来源尚不清楚。本文采用Rietveld全图拟合法对人工配制和天然的伊利石典型矿样进行了分析和计算，并与X射线荧光光谱(XRF)分析结果进行了对比，探讨了该方法的精确度及产生误差的因素。结果表明：人工配制的伊利石-石英二元混合物绝对误差范围为-0.9%～0.9%;伊利石-石英-钠长石三元混合物绝对误差范围为-1.9%～1.6%;伊利石-石英-钠长石-方解石-高岭石多元混合物绝对误差范围-2.3%～1.6%。天然伊利石矿样的Rietveld定量结果与XRF分析结果具有很好的一致性。表明该方法在分析伊利石矿样中具有较高的精确度，误差来源主要受伊利石结构模型、各物相中原子热振动参数Uiso取值合理性，以及择优取向等因素的影响。因此，在实际分析伊利石矿样时，建议根据实际情况选择合理的矿物结构模型，原子热振动Uiso取值应参考文献进行合...
|
| 关 键 词： | 伊利石 Rietveld全图拟合法 精确度 误差来源 X射线衍射法 结构精修 |
| 收稿时间： | 2021/3/31 0:00:00 |
| 修稿时间： | 2021/12/6 0:00:00 |
Accuracy and Error Sources of the Rietveld Full Pattern Fitting Method in Quantitative Analysis of Illite Ores |
| |
| CHEN Aiqing,ZHANG Lixue,LI Qiang,ZHU Jianxi,LI Shangying,HE Hongping.Accuracy and Error Sources of the Rietveld Full Pattern Fitting Method in Quantitative Analysis of Illite Ores[J].Rock and Mineral Analysis,2022(2):291-299. |
| |
| Authors: | CHEN Aiqing ZHANG Lixue LI Qiang ZHU Jianxi LI Shangying HE Hongping |
| |
| Institution: | Analysis and Testing Center, China Three Gorges University, Yichang 443002, China;Guangzhou Marine Geological Survey, China Geological Survey, Guangzhou 510075, China;Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640, China;School of Environmental Science and Engineering, Southern University of Science and Technology, Shenzhen 518055, China |
| |
| Abstract: | BACKGROUND: Illite is an important mineral resource. It is of great theoretical and practical significance to accurately obtain the mineral composition and content of illite ores. The Rietveld full pattern fitting method uses the whole diffraction pattern for analysis and shows high accuracy. However, due to the lack of pure illite samples, the accuracy and error sources of this method for analyzing the content of illite ores are not clearly known at present.OBJECTIVES: To understand the accuracy and error sources of the Rietveld full pattern fitting method in quantitative analysis of illite ores.METHODS: The Rietveld full pattern fitting method was used to quantitatively analyze artificial and natural illite ore samples. The results of X-ray fluorescence spectrometry (XRF) of natural illite ores were compared with the chemical compositions calculated from the mineral contents by the Rietveld method.RESULTS: The results showed that the maximum absolute error ranges of illite-quartz binary mixtures, illite-quartz-albite ternary mixtures, and illite-quartz-albite-calcite-kaolinite multiple mixtures were -0.9%-0.9%, -1.9%-1.6%, and -2.3%-1.6%, respectively. The chemical compositions of natural illite ores calculated by Rietveld method were in good agreement with the results of XRF. This indicated that the Rietveld method had high accuracy in the quantitative analysis of mineral contents of natural illite ore samples. The error sources were mainly affected by the illite structural model, atomic thermal displacement parameters Uiso, and preferred orientation.CONCLUSIONS: A reasonable structural model of illite should be chosen according to the actual samples. The values of atomic thermal vibration Uiso should be reasonably set according to the references. Preferred orientation should be decreased as much as possible during the sample preparation. |
| |
| Keywords: | illite the Rietveld full pattern fitting method accuracy error sources X-ray diffraction structural refinement |
|
| 点击此处可从《岩矿测试》浏览原始摘要信息 |
| 点击此处可从《岩矿测试》下载免费的PDF全文 |
|
