| 汶川科学钻探PDC取心钻头有限元分析 |
| |
| 引用本文： | 唐胜利.汶川科学钻探PDC取心钻头有限元分析[J].地质与勘探,2014,50(3):577-582. |
| |
| 作者姓名： | 唐胜利 |
| |
| 作者单位： | 西安科技大学，陕西西安； 中国地质调查局，北京； 中国地质科学院探矿工艺研究所，四川成都； 陕西煤田地质局，陕西西安； 陕西煤田地质局185队，陕西榆林 |
| |
| 基金项目： | 科技部科技支撑计划专项“汶川地震断裂带科学钻探(WFSD)”资助 |
| |
| 摘 要： | 汶川地震断裂带科学钻探项目是在龙门山"北川-映秀"断裂及龙门山前缘安县-灌县断裂附近实施5口科学群钻,由于所实施的5个钻孔都位于地震断裂带上,地层十分松软破碎,普通取心钻进的取心率低、岩心扰动大。为解决该问题,设计并采用了一种超前式隔水防冲蚀PDC取心钻头,取得了良好的效果,提高了岩心采取率,并保证了岩心的原状性。论文通过UG建立的实体模型导入ANSYS Workbench下的CFX流场分析和Steady-Thermal稳定热分析模块,分析了该钻头的井底流场分布、大小以及钻头的冷却效果,并计算孔底有效排粉的最低泵量,以确定超前式隔水防冲蚀PDC取心钻头取心钻进时保证取心率和岩心原状性要求的最优泵量。
|
| 关 键 词： | WFSD 地层 PDC取心钻头 半合管 取心率 |
| 收稿时间： | 2013/11/27 0:00:00 |
| 修稿时间： | 2014/1/16 0:00:00 |
A finite element analysis on the PDC coring bit used in Wenchuan scientific drilling |
| |
| Tang Sheng-li.A finite element analysis on the PDC coring bit used in Wenchuan scientific drilling[J].Geology and Prospecting,2014,50(3):577-582. |
| |
| Authors: | Tang Sheng-li |
| |
| Institution: | Xi'an University of Science and Technology, Xian, Shanxi; China Geological Survey Bureau, Beijing ; Chinese Academy of Geological Prospecting Institute of Technology, Sichuan, Chengdu; Coalfield Geology Bureau in Shanxi Province,, Xian, Shanxi; Coalfield Geology Bureau 185 Teams in Shanxi Province, Yulin, Shanxi |
| |
| Abstract: | The scientific drilling project for the Wenchuan earthquake fault zone plans to drill five holes on the Yingxiu-Beichuan fault and near the Guanxian fault at the frontal edge of the Longmen Shan Mountains. Because these holes are all located on earthquake faults in very soft and broken strata, conventional drill coring has low recovery rates and large core disturbance. To tackle this problem, a leading-type waterproof anti-erosion PDC coring bit is designed and applied, yielding good results which improve the core recovery and ensure the intact nature of cores. This article presents the construction of the solid model by UG and the application of modules for the CFX flow field analysis and steady-thermal stability thermal analysis in the software ANSYS Workbench to modeling. The purpose is to analyze the distribution and size of the flow fields and the cooling effect of the bit at the bottom of the hole, and to calculate the minimum amount of effectively pump discharge powder in the bottom. The results would help determine the optimal amount of pump to improve the core recovery and to ensure the intact nature of cores during drilling. |
| |
| Keywords: | WFSD formation PDC coring bit half-formed core tube core recovery |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《地质与勘探》浏览原始摘要信息 |
| 点击此处可从《地质与勘探》下载免费的PDF全文 |
|
