|
|||||
|
|
Shear strength and pore-water pressure characteristics of sandy soil mixed with plastic fine |
|
| Authors: | M Bayat E Bayat H Aminpour A Salarpour |
| Institution: | 1. Young Researchers Club, Khomein Branch, Islamic Azad University, Khomein, Iran 3. Department of Civil Engineering, Bu-Ali Sina University, Hamedan, Iran 4. Department of Civil Engineering, Azad University of Kerman, Kerman, Iran |
| Abstract: | Recent earthquake case histories have revealed the liquefaction of mixtures of sand and fine particles during earthquakes. Different from earlier studies which placed an emphasis on characterisation of liquefaction in terms of the induced shear stress required to cause liquefaction, this study adopted a strain approach because excess pore-water pressure generation is controlled mainly by the level of induced shear strains. The current study includes the results of a set of laboratory tests carried out on sand specimens with the same relative densities and variation in the plastic fines (kaolinite or bentonite) contents ranging from 0 to either 30 % and consolidated at mean confining pressure of 100, 200 and 300 kPa using static triaxial test apparatus, in order to study the influence of fine content and other parameters on the undrained shear strength and liquefaction potential of clayey sand specimens; also, pore-water pressures in the specimens are discussed. Results of tests show that the peak strength decreases as the fines (kaolinite or bentonite) content increases up to a threshold content of fines (FCth) after which, increases in plastic fine content lead to improve the peak shear strength of specimens, and also the ultimate steady-state strength has been improved due to the increased in plastic fines content. Also, pore pressure build-up in clayey sands is generally slower than that observed in pure sand. |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ | |