首页 | 本学科首页   官方微博 | 高级检索  
     检索      

大庆油田葡一油层组高精度层序格架内储集砂体的沉积构成及其对油田开发的意义
引用本文:张英志,林畅松,马利民,刘景彦,张宇,梁秀丽.大庆油田葡一油层组高精度层序格架内储集砂体的沉积构成及其对油田开发的意义[J].现代地质,2006,20(2):225-231.
作者姓名:张英志  林畅松  马利民  刘景彦  张宇  梁秀丽
作者单位:1. 中国地质大学,能源学院,北京,100083;大庆油田有限责任公司,采油三厂,黑龙江,大庆,163113
2. 中国地质大学,能源学院,北京,100083
3. 大庆油田有限责任公司,采油三厂,黑龙江,大庆,163113
4. 山东兖州矿业集团,山东,济宁,272118
摘    要:大庆油田北三区上白垩统葡一油层组以高频湖进面可划分为3个四级和8个五级的高精度层序地层单元。以密集开发井资料为基础追踪这些层序单元可为储层砂体研究提供精细的等时对比框架。该油层组的主要储集砂体多为复合型砂体,由各种单一砂体相互叠置和切割所形成,包括下切河道(谷)分流河道复合砂体、水下分流河道上叠水上分流河道复合砂体、分流河道上叠河口坝砂体、决口水道上叠决口三角洲砂体等复合类型。这些砂体的内部沉积构成复杂,控制着厚油层储层物性的非均质性变化。在高精度层序框架内可划分出3个砂体复合带,其沉积构成的差异对剩余油的分布具有重要影响。主河道复合砂体带的孔渗性和连通性好,易形成上部层内和隔层非均质性剩余油;河道边部-河口坝复合砂岩带结构复杂,隔层发育,易形成平面未波及或物性变化导致的剩余油,应是区内剩余油挖潜的重要相带;边缘砂坝-决口扇-越岸泛滥砂泥岩互层带砂体分布局限,孔渗性和连通性差,由于井网控制不够或连通性差形成剩余油。

关 键 词:高精度层序格架  复合砂体沉积构成  剩余油分布  葡一油层组  大庆油田
文章编号:1000-8527(2006)02-0225-07
收稿时间:01 5 2006 12:00AM
修稿时间:03 5 2006 12:00AM

Facies Architecture of the Reservoir Sandstones within the High-Resolution Sequence Framework of the Pu-1 Oil Layer and Its Significance to Exploitation in Daqing Oilfield
ZHANG Ying-zhi,LIN Chang-song,MA Li-min,LIU Jing-yan,ZHANG Yu,LIANG Xiu-li.Facies Architecture of the Reservoir Sandstones within the High-Resolution Sequence Framework of the Pu-1 Oil Layer and Its Significance to Exploitation in Daqing Oilfield[J].Geoscience——Journal of Graduate School,China University of Geosciences,2006,20(2):225-231.
Authors:ZHANG Ying-zhi  LIN Chang-song  MA Li-min  LIU Jing-yan  ZHANG Yu  LIANG Xiu-li
Institution:1. School of Energy Resources, China University of Geosciences, Beijing 100083, China ; 2. The Third Exploitation Factory of Daqing Oilfield , Daqing , Heilongjiang 163113, China; 3. Yankuang Group Company Ltd, Jining, Shandong 272118, China
Abstract:Pu-1 oil layer of the Upper Cretaceous in the third northern development district of Daqing Oilfield,can be divided into three 4th order and eight 5th order high-resolution sequences,in terms of lacustrine flooding surface.Correlation of these stratigraphic units based on densely-spaced borehole data provides a high resolution correctable stratigraphic framework for the study of the architecture of the reservoir sandbodies.Most of the major reservoir sandbodies are composite sandbodies formed by amalgamation or superimposition of single sandbodies,and include the incised valley-distributary channel,distributary channel superimposed subaqueous distributary channel,distributary channel superimposed delta front mouth bar,crevasse channel superimposed crevasse delta or marginal sand bar composite sandbodies.The complex of the facies architecture of the sandbodies determines the reservoir inhomogeneity of the oil layer.Within the high-resolution sequence stratigraphy framework,three composite sandstone belts have been classified,and their depositional architectures had a significant influence on the remaining oil distribution.The main fluvial channel composite belts are of high porosity,permeability and connectivity,with remaining oil maioly formed by the inhomogeneity of the upper intrabed and obstruct layer.The marginal fluvial channel-mouth bar belts are characteristic of complex amalgamation of sandbodies with more inter obstructs,and the remaining oil are commonly formed by inhomogeneity of the sandbodies with poor permeability and dispreaded aseas in development.This is the important facies zone for prediction of remaining oil in the oil field.The marginal sandy bar-crevasse and flooding interbeded fine belt are characterized by limited sandstones and poor permeability,with remaining oil often formed by deficient borehole network or poor connectivity.
Keywords:high-resolution sequence framework  composite sandbody architecture  remaining oil distribution  Pu-1 oil layer  Daqing Oilfield
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号