| 利用金矿尾砂制备矿物聚合材料的实验研究 |
| |
| 引用本文： | 任玉峰,马鸿文,王刚,冯武威,丁秋霞.利用金矿尾砂制备矿物聚合材料的实验研究[J].现代地质,2003,17(2):171-175. |
| |
| 作者姓名： | 任玉峰 马鸿文 王刚 冯武威 丁秋霞 |
| |
| 作者单位： | 1. 中国地质大学,材料科学与工程学院,北京,100083;中国地质科学院,地质研究所,北京,100037
2. 中国地质大学,材料科学与工程学院,北京,100083 |
| |
| 基金项目： | 北京市科委农业科技发展计划项目 ( 95 35 0 0 40 0 )。 |
| |
| 摘 要： | 利用北京平谷金矿尾砂、变高岭石、NaOH、KOH和水玻璃制备了矿物聚合材料 ,正交实验结果表明 35℃时的优化条件为尾砂含量 80 %～ 82 5 %、固 /液比 4 3～ 4 7、水 /碱比为4～ 5 (均为质量比 ) ,升高温度、延长固化时间及室温放置时间均会使矿物聚合材料的抗压强度显著提高。将金矿尾砂制备成矿物聚合材料 ,可使部分CN-转化成无害的CO2 -3 和H2 ,其他则以夹持 (物理 )方式固定下来 ;当存在Fe2 +或Fe3+离子时 ,CN-以氰化铁的化学方式固定下来。该矿物聚合材料在 1mol/L的HCl溶液中浸泡 30d ,质量损失 5 6 % ,结构完好 ,表现出良好的抗酸性。在 6 0℃下固化 2 4h ,室温放置 6d后抗压强度为 2 2MPa ;在 6 0℃下固化72h ,抗压强度为 36 6MPa。该研究为金矿尾砂的利用提供了一条新途径。
|
| 关 键 词： | 矿物聚合材料 金矿尾砂 抗压强度 影响因素 |
| 文章编号： | 1000-8527(2003)02-0171-05 |
| 修稿时间： | 2002年11月13 |
EXPERIMENTAL STUDY OF THE GEOPOLYMERS SYNTHESIZED WITH GOLD-TAILINGS |
| |
| REN Yu-feng ,MA Hong-wen,WANG Gang,FENG Wu-wei,DING Qiu-xia.EXPERIMENTAL STUDY OF THE GEOPOLYMERS SYNTHESIZED WITH GOLD-TAILINGS[J].Geoscience——Journal of Graduate School,China University of Geosciences,2003,17(2):171-175. |
| |
| Authors: | REN Yu-feng MA Hong-wen WANG Gang FENG Wu-wei DING Qiu-xia |
| |
| Institution: | REN Yu-feng 1,2,MA Hong-wen1,WANG Gang1,FENG Wu-wei1,DING Qiu-xia1 |
| |
| Abstract: | The geopolymers were synthesized using gold-tailings, metakaolin, water glass, sodium and potassium hydrate. With the method of orthogonal experiments, the optimized result is gold-tailings of 80%-82.5%, powder to alkaline silicate solution mass ratios of 4.3-4.7 and water to alkaline mass ratios of 4-5. Based on these results, it is found that the compressive strength is largely enhanced by raising temperature and elongating hardening time as well as staying time in the air. The serious poisonous CN- in the gold-tailings can be trapped physically in the geopolymers and fixed chemically in the geopolymers when CN- meets with Fe 2+ or Fe 3+. The mass loss of the geopolymers soaked in 1 mol/L HCl for 30 days averages 5.6%, showing a good acid-resistance, concerning its 9% hematite and 6% calcite in gold-tailings. At 60℃, with hardening time of 24 hours and 72 hours, the compressive strength of the geopolymers reaches 22 MPa after another 6 days in ambient condition and 36.6 MPa, respectively. This result provides the possibilities for geopolymers utilized as construction blocks in industry. |
| |
| Keywords: | geopolymer gold-tailings compressive strength influential factor |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
