| 松辽大型浅水湖盆三角洲沉积特征及前缘相储层结构模型 |
| |
| 引用本文： | 吕晓光,赵翰卿.松辽大型浅水湖盆三角洲沉积特征及前缘相储层结构模型[J].沉积学报,1999,17(4):572-577. |
| |
| 作者姓名： | 吕晓光 赵翰卿 |
| |
| 作者单位： | 1 中国地质大学 北京 100083; |
| |
| 基金项目： | 九五国家课题9510901010502 |
| |
| 摘 要： | 松辽湖盆具有大、浅、缓、湖面波动迅速、波浪作用带宽和能量较弱的特点,形成了北部富有特色的大型河流三角洲沉积物。这一三角洲在垂向层序、骨架砂体类型、规模等诸多方面与海相三角洲相比都有很大差别,而更多的表现为浅水三角洲的特征。前缘相砂体具有明显的条带方向性,前缘相骨架砂体为水下河道沉积,缺乏典型的厚层反韵律的河口坝砂体。垂向上层序不连续,典型的三层结构特征不明显。在前缘相内可进一步划分出包括水下河道和席状砂组合的内前缘相沉积和以席状砂为主的外前缘相沉积。不同层段和亚相位置出现相应的砂体类型,每一类型砂体与泥岩在空间有规律的组合,形成了特定的储层空间分布结构,为储层结构模型的建立提供了基础。以砂体密度,夹层密度和有效砂岩系数等定量参数结合砂体组合形式,相带位置等成因特征,前缘相储层5类结构模型:即孤立水道型,叠加水道型,不稳定互层型,稳定互层型,孤立薄层型。
|
| 关 键 词： | 松辽湖盆 浅水三角洲 沉积特征 水下河道 前缘相 |
| 收稿时间： | 1998-04-10 |
Depositional Characteristics and Front Facies ReservoirFramework Model in SongLiao Shallow Lacustrine Delta |
| |
| LU Xiao guang,LI Chang shan,CAI Xi Yuan,LI Bo hu ZHAO Han qing.Depositional Characteristics and Front Facies ReservoirFramework Model in SongLiao Shallow Lacustrine Delta[J].Acta Sedimentologica Sinica,1999,17(4):572-577. |
| |
| Authors: | LU Xiao guang LI Chang shan CAI Xi Yuan LI Bo hu ZHAO Han qing |
| |
| Institution: | 1 China University of Geoscience, Beijing 100083;2 Institute of Exploration and Development, Daqing, Heilangjiang 163712 |
| |
| Abstract: | Characterized by large area, shallow water, gentle slope, wide wave influencing belt, and weak energy, the SongLiao basin deposited a distinct large river delta in its northern depositional system. The delta is different from other marine delta in vertical sequence, types of framework sandbody and scale etc.. Instead, it presents more characteristics of shallow water delta. The delta is highly constructive fluvial dominated, characterized by directional ribbon like sandbody in front facies, and fluvial deposition can influences more than 20～30 kilometers under shoreline. Vertically, its sequence is discontinuous without three structure of typical delta. The thickness of sandbody is thin, with that of subaqueous channel 2～5m, and that of sheet sand less than 2m. In general, facies belts are well developed in which front facies usually covers more than 30～40 kilometers, and the inner front including the microfacies of subaqueous and sheet sand,and the outer front facies including only the sheet sand can be subdivided. Various kinds of sandbody association are formed because of frequently transgression and regression. The above characteristics have resulted in corresponding sandbody types in various stratigraphy section and subfacies area. Distinct framework models are formed while each kind of sandbody associate with mud in 3D space, these provides a sound genetic basis for establishing framework model. Based on the quantitative parameters such as density of sandbody, density of barrier, and coefficient of net sand,combining with the genetic features of sandbody associations and facies location, 5 types of framework models such as isolated channel pattern, stacked channel pattern, stable inter bedded pattern, unstable inter bedded pattern and isolated thin layer pattern are put forward. The sandbody in isolated channel pattern is very narrow, and shows puzzled shape in 3D space, so it is easy to form small ribbon like or lump like oil bearing area resulting from incompletely water driver under the condition of large well distance. Characterized by well developped subaqueous channel and main sheet sand, large sandbody density, good reservoir quality and connectivity between sandbodies, most of recovery oil in stacked channel pattern has been produced. The main features of unstable inter bedded pattern are its narrow subaqueous channel width and incised sheet sand, which result in good communication in later and poor connectivity in vertical. Remaining oil only exists in small area caused by local poor reservoir quality. For the stable inter bedded pattern, sandbody covers large horizontal area, sand layer and mud layer alternate in vertical. The sandbody possesses good connectivity in later and poor connectivity in vertical, some relative large area remaining oil exists resulting from poor reservoir quality. The sandbody of isolated thin layer pattern distribute on outer front facies of various types of delta, because of its very small sandbody density, the connectivity between sandbodies is very poor in 3D space, remaining oil can be produced only by density well pattern. |
| |
| Keywords: | Songliao basin shallow water delta depositional characteristic subaqueous channel front facies framework model remaining oil |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《沉积学报》浏览原始摘要信息 |
| 点击此处可从《沉积学报》下载免费的PDF全文 |
|
