首页 | 本学科首页   官方微博 | 高级检索  
     检索      

大屯煤田压力型和压力分散型抗浮锚杆的现场试验研究
引用本文:张有,吕建国,赵付朝.大屯煤田压力型和压力分散型抗浮锚杆的现场试验研究[J].中国煤田地质,2007,19(4):54-56,76.
作者姓名:张有  吕建国  赵付朝
作者单位:中国地质大学,北京海淀100083
摘    要:压力型和压力分散型抗浮锚杆已在工程中应用,但是现场测试数据的缺乏影响了其更为广泛的应用和发展。本文通过对压力型、压力分散型抗浮锚杆的原位抗拔试验,测试了其载荷—位移曲线,分析了两种抗浮锚杆的受力和变形特点,探讨了压力分散型抗浮锚杆的破坏形式,为进一步研究其工作机理提供了依据。

关 键 词:压力型  压力分散型  抗浮锚杆  原位抗拔试验
文章编号:1004-9177(2007)04-0054-03
收稿时间:2007-04-26
修稿时间:2007-04-26

In-situ Test Research of Compression and Compression-dispersive Anti-float Anchor
Zhang You, Lu Jian-guo, Zhao Fu-chao.In-situ Test Research of Compression and Compression-dispersive Anti-float Anchor[J].Coal Geology of China,2007,19(4):54-56,76.
Authors:Zhang You  Lu Jian-guo  Zhao Fu-chao
Institution:China University of Geoseienees, Beijing China, 100083
Abstract:Compression and compression-dispersive anti-float anchor have been used in engineering, but widespread using and development are affected by lacking in-situ test data. In this paper, loading-dlsplacement curves of compression and compressiondispersive anti-float anchor are obtained by in-situ pulling test, mechanical and deformational characteristics of them are analyzed, failure patterns of compassion-dispersive anti-float anchor are probed, the basis of further research of working mechanism of it is provided.
Keywords:Compression - type  Compression dispersive - type  Anti-float anchor  In-situ pulling test
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号