Secondary Ion Mass Spectrometry Bias on Isotope Ratios in Dolomite–Ankerite,Part I: δ18O Matrix Effects |
| |
| Authors: | Maciej G ?liwiński Kouki Kitajima Reinhard Kozdon Michael J Spicuzza John H Fournelle Adam Denny John W Valley |
| |
| Institution: | 1. WiscSIMS, Department of Geoscience, University of Wisconsin‐Madison, Madison, WI, USA;2. Department of Geoscience, University of Wisconsin‐Madison, Madison, WI, USA;3. Department of Geoscience, NASA Astrobiology Institute, University of Wisconsin‐Madison, Madison, WI, USA;4. Department of Marine and Coastal Sciences, Rutgers, The State University of New Jersey, New Brunswick, NJ, USA |
| |
| Abstract: | We document the development of a suite of carbonate mineral reference materials for calibrating SIMS determinations of δ18O in samples with compositions along the dolomite–ankerite solid solution series CaMg(CO3)2–CaFe(CO3)2]. Under routine operating conditions for the analysis of carbonates for δ18O with a CAMECA IMS 1280 instrument (at WiscSIMS, University of Wisconsin‐Madison), the magnitude of instrumental bias along the dolomite–ankerite series decreased exponentially by ~ 10‰ with increasing Fe content in the dolomite structure, but appeared insensitive to minor Mn substitution < 2.6 mol% Mn/(Ca+Mg+Fe+Mn)]. The compositional dependence of bias (i.e., the sample matrix effect) was calibrated using the Hill equation, which relates bias to the Fe# of dolomite–ankerite i.e., molar Fe/(Mg+Fe)] for thirteen reference materials (Fe# = 0.004–0.789); for calibrations employing either 10 or 3 μm diameter spot size measurements, this yielded residual values ≤ 0.3–0.4‰ relative to CRM NBS 19 for most reference materials in the suite. Analytical precision was ± 0.3‰ (2s, standard deviations) for 10‐μm spots and ± 0.7‰ (2s) for 3‐μm spots, based on the spot‐to‐spot repeatability of a drift monitor material that ‘bracketed’ each set of ten sample‐spot analyses. Analytical uncertainty for individual sample analyses was approximated by a combination of precision and calibration residual values (propagated in quadrature), suggesting an uncertainty of ± 0.5‰ (2s) for 10‐μm spots and ± 1‰ (2s) for 3‐μm spots. |
| |
| Keywords: | secondary ion mass spectrometry oxygen isotopes dolomite ankerite matrix effects
SIMS
isotopes de l'oxygè ne dolomite anké rite effets de matrice |
|
|
