| 双层水口超高胎体金刚石钻头孔底磨损过程分析 |
| |
| 引用本文： | 方俊,鄢泰宁,李田军.双层水口超高胎体金刚石钻头孔底磨损过程分析[J].煤田地质与勘探,2011,39(1):74-77. |
| |
| 作者姓名： | 方俊 鄢泰宁 李田军 |
| |
| 作者单位： | 岩土钻掘与防护教育部工程研究中心,湖北,武汉,430074 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划)项目(2007AA060701) |
| |
| 摘 要： | 双层水口超高胎体金刚石钻头在深孔硬岩绳索取心钻进中具有其优势.根据CUG-2钻探参数监测系统的检测数据,对双层水口超高胎体金刚石钻头的孔底磨损过程及其优缺点进行了分析.结果显示,该钻头的使用寿命比常规金刚石钻头高近1倍,但其孔底磨损过程比孕镶金刚石钻头复杂,尤其在两层水口的过渡期,容易造成孔底排粉不畅,甚至出现钻头唇面...
|
| 关 键 词： | 双层水口超高胎体金刚石钻头 泵量 磨损 结构改进 |
Structure optimization and down-hole process of diamond bit with double-layer waterways and ultra-high matrix |
| |
| FANG Jun,YAN Taining,LI Tianjun.Structure optimization and down-hole process of diamond bit with double-layer waterways and ultra-high matrix[J].Coal Geology & Exploration,2011,39(1):74-77. |
| |
| Authors: | FANG Jun YAN Taining LI Tianjun |
| |
| Institution: | FANG Jun,YAN Taining,LI Tianjun(Engineering Research Center of Rock-Soil and Excavation and Protection,Ministry of Education,Wuhan 430074,China) |
| |
| Abstract: | Diamond bit with double-layer waterway and ultra-high matrix has advantage in wire line coring drilling of deep hard rocks.According to detection data of CUG-2drilling parameter monitoring system,the paper analyzed the down-hole wear and tear process,advantage and disadvantage of diamond bit with double-layer waterway and ultra-high matrix.The results indicated that the service life of the bit was nearly twice longer than that of conventional diamond bit,but its down-hole wear and tear process was more comp... |
| |
| Keywords: | double-layer waterway and ultra-high matrix diamond bit pump duty wear and tear structure improvement |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
