首页 | 本学科首页   官方微博 | 高级检索  
     检索      

分级加-卸载条件下原煤的渗透及能耗特征研究
引用本文:段敏克,蒋长宝,俞欢,陆天宇,钮彬炜,孙东玲.分级加-卸载条件下原煤的渗透及能耗特征研究[J].岩土力学,2018,39(4):1346-1354.
作者姓名:段敏克  蒋长宝  俞欢  陆天宇  钮彬炜  孙东玲
作者单位:1. 重庆大学 煤矿灾害动力学与控制国家重点实验室,重庆 400030;2. 重庆大学 资源及环境科学学院,重庆 400030; 3. 中煤科工集团重庆研究院有限公司,重庆 400037
基金项目:国家自然科学基金资助项目(No. 51674048);重庆市科技计划资助项目(No. cstc2015jcyjA90009, No. cstc2015jcyjBX0076)。
摘    要:利用自主研制的含瓦斯煤热-流-固耦合三轴伺服渗流试验装置,进行了含瓦斯原煤分级加-卸载试验,分析探讨了煤岩的变形、渗透特性及能耗特征,结合能耗特征建立了损伤变量方程。研究结果表明:随分级加-卸载进行,煤样的累积残余变形逐渐增加,相对残余变形先降低,后出现残余变形稳定区,临近煤样破坏又上升。随分级加-卸载进行,渗透率总体变化趋势呈螺旋状先降低,后上升,破坏瞬间急剧增大;定义渗透率绝对恢复率?j和渗透率相对恢复率?x定量分析了加-卸载渗透率的变化情况,发现?j先减小,临近破坏又增大,?x逐渐增大,其中弹性段?x保持在85%~95%,临近破坏超过100%。随分级加-卸载进行,煤体累积耗散能呈指数函数增加,单级循环耗散能增加。随着轴向应力的增加,主应力差增加,损伤变量值增大,且煤样破坏时的损伤变量临界值Dc ≈0.9。

关 键 词:含瓦斯煤  分级加-卸载  残余变形  渗透率  耗散能  
收稿时间:2016-05-19

Experimental research on energy dissipation and seepage properties of coal under loading-unloading conditions at different stress levels
DUAN Min-ke,JIANG Chang-bao,YU Huan,LU Tian-yu,NIU Bin-wei,SUN Dong-ling.Experimental research on energy dissipation and seepage properties of coal under loading-unloading conditions at different stress levels[J].Rock and Soil Mechanics,2018,39(4):1346-1354.
Authors:DUAN Min-ke  JIANG Chang-bao  YU Huan  LU Tian-yu  NIU Bin-wei  SUN Dong-ling
Institution:1. State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing 400030, China; 2. College of Resources and Environmental Science, Chongqing University, Chongqing 400030, China; 3. China Coal Technology Engineering Group Chongqing Research Institute, Chongqing 400037, China
Abstract:In this paper, loading-unloading experiments were carried out on gas-contained coal under different stress levels by using self-made thermal-hydro-mechanical (THM) coupling equipment. The characteristics of the deformation, seepage and energy dissipation of coal and rock were analysed, and the damage variable equation was also established by considering the energy dissipation. Research results show that the cumulative residual deformation increases gradually with the advancing of cyclic loading-unloading. The relative residual deformation decreases firstly, then maintains stable at a certain value, and finally rises again when the coal sample is nearly destroyed. With the advancing of cyclic loading-unloading, the overall trend of permeability decreases spirally, and then increases until the coal sample is fractured. Moreover, a sharp increase is observed at the moment of destruction. The absolute recovery rate of permeability and relative recovery rate of permeability are defined as ?j and ?x to quantitatively analyse the changes of permeability in loading and unloading processes, respectively. It is found that ?j decreases firstly, and then increases at the critical moment of destruction. However, ?x increases steadily during the process, where ?x maintains at 85%-95% in the elastic stage, and ?x is more than 100% at the critical moment of destruction. With the advancing of cyclic loading-unloading, the cumulative dissipated energy grows exponentially, and the single-stage cycle of dissipation energy increases. With the increase of the axial stress, the principal stress difference increases, and the value of damage variable also increases. In addition, damage variable of coal Dc is 0.9 when coal is fractured.
Keywords:coal containing gas  different level loading-unloading  residual deformation  seepage  energy dissipation  
本文献已被 CNKI 等数据库收录!
点击此处可从《岩土力学》浏览原始摘要信息
点击此处可从《岩土力学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号