首页 | 本学科首页   官方微博 | 高级检索  
     检索      

脉冲磨料射流破碎岩石的实验研究
引用本文:李晓红,向文英,卢义玉.脉冲磨料射流破碎岩石的实验研究[J].岩土力学,2005,26(7):1043-1048.
作者姓名:李晓红  向文英  卢义玉
作者单位:重庆大学,西南资源开发及环境灾害控制工程教育部重点实验室,重庆,400044
基金项目:国家自然科学基金重点项目(No.50334060)。
摘    要:在淹没和非淹没状态下研究了脉冲射流的动态特性、振荡腔腔长、靶距、磨料浓度等参数与脉冲磨料射流的切割和冲蚀性能的关系,对比分析了脉冲磨料射流与前混合磨料射流在相同实验条件下对花岗岩及石灰岩等的冲蚀性能。实验结果表明,自激振荡射流频率随腔长增大而减小,随压力及流量的增大而增大;脉冲磨料射流的体积冲蚀速度在淹没状态下是前混合磨料射流的1.7倍,而在非淹没状态下为前混合磨料射流的1.4倍。

关 键 词:脉冲磨料射流  淹没和非淹没状态  岩石破碎
文章编号:1000-7598-(2005)07-1043-06
收稿时间:2004-12-18
修稿时间:2004年12月18

Study on rock-cutting experiments of pulsed abrasive water jet
LI Xiao-hong,XIANG Wen-ying,LU Yi-yu.Study on rock-cutting experiments of pulsed abrasive water jet[J].Rock and Soil Mechanics,2005,26(7):1043-1048.
Authors:LI Xiao-hong  XIANG Wen-ying  LU Yi-yu
Institution:Key Lab. for the Exploitation of Southwest Resources & Environmental Disaster Control Engineering, Ministry of Education, Chongqing University, Chongqing 400044, China
Abstract:The dynamic characteristics of pulsed water jets and the relationship between length of oscillating chamber,standoff distance ,abrasive concentration and erosion rate as well as cutting specific energy for the pulsed abrasive water jet were investigated by experiments under submerged and in the air. The cutting and erosion capabilities of the pre-mixed abrasive water jet and the pulsed abrasive water jet on granite and limestone were analyzed comparatively. It is shown that the self-oscillating frequencies decrease with the length of chamber and increase with the pressure and runoff,the erosion rate of the pulsed abrasive water jet are 70 percent larger than those of the pre-mixed abrasive water jet in the submerged conditions,as well as 40 percent in the air.
Keywords:pulsed abrasive  water jet  in the submerged and in the air  rock-cutting
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《岩土力学》浏览原始摘要信息
点击此处可从《岩土力学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号