| 绳索取心钻杆负角度螺纹扭矩计算分析和测试研究 |
| |
| 引用本文： | 高申友,孙建华,蔡纪雄,刘狄磊.绳索取心钻杆负角度螺纹扭矩计算分析和测试研究[J].探矿工程,2016,43(5):45-50. |
| |
| 作者姓名： | 高申友 孙建华 蔡纪雄 刘狄磊 |
| |
| 作者单位： | 中国地质装备总公司,中国地质科学院勘探技术研究所,无锡钻探工具厂有限公司,无锡钻探工具厂有限公司 |
| |
| 基金项目： | “十二五”国家高技术研究发展计划（863计划）“4000 m地质岩心钻探成套技术装备”（编号：2014AA06A607） |
| |
| 摘 要： | 分析了绳索取心钻杆负角度螺纹受力状态，以静力学和材料力学为基础计算了用于深孔绳索取心钻探的CNHT绳索取心钻杆螺纹应力情况和抗扭能力。同时，针对不同锥度和牙高的负角度螺纹进行了理论计算和静扭测试比对，理论计算结果与测试结果非常接近，确定了该计算方法的准确性，优化总结出抗扭能力较强的负角度螺纹参数。
|
| 关 键 词： | 绳索取心钻杆 负角度螺纹 最大扭矩 受力分析 静扭测试 |
| 收稿时间： | 2016/3/4 0:00:00 |
| 修稿时间： | 2016/3/4 0:00:00 |
Calculation Analysis on Negative Angle Thread Torque of Wire-line Coring Drill Pipe and Test Research |
| |
| GAO Shen-you,SUN Jian-hu,CAI Ji-xiong and LIU Di-lei.Calculation Analysis on Negative Angle Thread Torque of Wire-line Coring Drill Pipe and Test Research[J].Exploration Engineering(Drilling & Tunneling),2016,43(5):45-50. |
| |
| Authors: | GAO Shen-you SUN Jian-hu CAI Ji-xiong and LIU Di-lei |
| |
| Institution: | China Geological Equipment Group Co., Ltd.,The Institute of Exploration Techniques, CAGS,Wuxi Drilling Tools Factory Co., Ltd.,Wuxi Drilling Tools Factory Co., Ltd. |
| |
| Abstract: | The analysis is made on the stress state of negative angle thread of wire-line coring drill pipe, the thread stress situation and anti-twist property of CNHT drill pipe used for deep hole wire-line core drilling are calculated based on static and material mechanics. Theoretical calculations and static torsion test were taken on negative angle thread with different taper and tooth height. It is found that theoretical results and test results are very close; by which, the accuracy of the calculation method is determined and the parameters of negative angle thread with strong anti-twist property are optimized and summarized. |
| |
| Keywords: | wire-line coring drill pipe negative angle thread maximum torque stress analysis static torsion test |
|
| 点击此处可从《探矿工程》浏览原始摘要信息 |
| 点击此处可从《探矿工程》下载免费的PDF全文 |
