首页 | 本学科首页   官方微博 | 高级检索  
     检索      

郑州市地面沉降监测基岩标施工技术
引用本文:王刚,李莹,黄烜,于丽.郑州市地面沉降监测基岩标施工技术[J].探矿工程,2018,45(4):82-86.
作者姓名:王刚  李莹  黄烜  于丽
作者单位:河南省地矿局第二地质环境调查院,河南省地矿局第二地质环境调查院,河南省地矿局第二地质环境调查院,河南省地矿局第二地质环境调查院
摘    要:根据区域地质条件,郑州市地面沉降监测网基岩标建标场地选择在淮河西路与西三环交叉口东南600 m的河南省地质环境监测院内,建标深度为732 m。地质鉴别孔孔深780 m,孔径108 mm,全孔取心钻进,施工的重点是保证岩心采取率,采用泥浆护壁回转钻进,根据钻进层位的岩性不同配置不同特性的泥浆;基岩标标孔孔深780 m,孔径311 mm,施工的控制目标是孔身质量和垂直度。采用三牙轮钻头宝塔式钻具组合不取心钻进施工工艺。取得了较好的施工质量,创造了良好的效益。

关 键 词:地面沉降监测  基岩标  地质鉴别孔  标孔  郑州市
收稿时间:2017/12/14 0:00:00
修稿时间:2018/4/8 0:00:00

Construction Technology of Bedrock Mark for Ground Subsidence Monitoring in Zhengzhou
WANG Gang,LI Ying,HUANG Xuan and YU Li.Construction Technology of Bedrock Mark for Ground Subsidence Monitoring in Zhengzhou[J].Exploration Engineering(Drilling & Tunneling),2018,45(4):82-86.
Authors:WANG Gang  LI Ying  HUANG Xuan and YU Li
Institution:No.2 Institute of Geo-environment Survey of Henan,No.2 Institute of Geo-environment Survey of Henan,No.2 Institute of Geo-environment Survey of Henan,No.2 Institute of Geo-environment Survey of Henan
Abstract:According to the regional geological conditions, Zhengzhou Ground Subsidence Monitoring Network decided the building site with the setting depth of 732m. The geological identification hole is 780m in depth with 108mm in diameter, full hole coring drilling, the construction focuses on the core recovery, rotary drilling is adopted with mud protection, and according to the lithology in different drilling horizons, various mud are prepared. The bedrock mark hole is 780m in depth with 311mm in diameter, the construction focuses on the borehole quality and verticality, full face drilling technology is adopted with three-cone bit and pagoda type BHA, good construction quality is achieved.
Keywords:ground subsidence monitoring  bedrock mark  geological identification hole  mark hole  Zhengzhou City
点击此处可从《探矿工程》浏览原始摘要信息
点击此处可从《探矿工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号