Time Transfer for TAI Using a Geodetic Receiver: An Example with the Ashtech ZXII-T |
| |
| Authors: | Pascale Defraigne Carine Bruyninx |
| |
| Institution: | (1) Royal Observatory of Belgium, Avenue Circulaire, 3 B-1180 Brussels, Belgium, BE |
| |
| Abstract: | The International Atomic Time scale (TAI) is computed by the Bureau International des Poids et Mesures (BIPM) from a set of
atomic clocks distributed in about 40 time laboratories around the world. The time transfer between these remote clocks is
mostly performed by the so-called GPS common view method: The clocks are connected to a GPS time receiver whose internal software
computes the offsets between the remote clocks and GPS time. These data are collected in a standard formal called CCTF. In
the present study we develop both the procedure and the software tool that allows us to generate the CCTF files needed for
time transfer to TAI, using RINEX files produced by geodetic receivers driven by an external frequency. The CCTF files are
then generated from the RINEX observation files. The software is freely available at ftp://omaftp.oma.be/dist/astro/time/RINEX_CCTF.
Applied to IGS (International GPS Service) receivers, this procedure will provide a direct link between TAI and the IGS clock
combination. We demonstrate here the procedure using the RINEX files from the Ashtech Metronome (ZXII-T) GPS receiver, to
which we apply the conventional analysis to compute the CCTF data. We compared these results with the CCTF files produced
by a time receiver R100-30T from 3S-Navigation. We also used this comparison with the results of a calibrated time receiver
to determine the hardware delay of the geodetic receiver. ? 2001 John Wiley & Sons, Inc. |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
