| ITRF中GNSS/SLR并址站归心基线的“一步解” |
| |
| 引用本文： | 马下平.ITRF中GNSS/SLR并址站归心基线的“一步解”[J].测绘学报,2018,47(1):64-70. |
| |
| 作者姓名： | 马下平 |
| |
| 作者单位： | 西安科技大学测绘科学与技术学院, 陕西 西安 710054 |
| |
| 基金项目： | The National Natural Science Foundation of China，Startup Foundation for Doctors of Xi'An University of Science and Technology，Xi'an University of Science and Technology Cultivation Fund ，西安科技大学博士启动金，西安科技大学培育基金 |
| |
| 摘 要： | 提出将SLR望远镜的参考点和两轴偏差作为未知参数，在ITRF中联合并址站归心测量中GNSS基线网和地面网观测量（水平方向、垂直角和边长），建立SLR站观测设备的参考点与观测标志、观测标志之间、参考点和两轴偏差与其他未知参数之间的多种约束条件来求解归心基线的“一步解”。利用“一步解”解算出“陆态网络”中北京、昆明和西安3个GNSS/SLR并址站在ITRF2014中的归心基线及其协方差阵。结果显示：归心基线的中误差优于2 mm，与已有分步解相比，差值不超过2 mm；水平轴和垂直轴之间的偏差分别为3.8、0.7和3.6 mm，中误差分别为1.3、1.2和1.3 mm。
|
| 关 键 词： | 归心基线 一步解 GNSS/SLR 约束条件 |
| 收稿时间： | 2017-02-17 |
| 修稿时间： | 2017-11-17 |
One Step Solution to the Local Tie Vectors of GNSS/SLR in ITRF |
| |
| MA Xiaping.One Step Solution to the Local Tie Vectors of GNSS/SLR in ITRF[J].Acta Geodaetica et Cartographica Sinica,2018,47(1):64-70. |
| |
| Authors: | MA Xiaping |
| |
| Institution: | School of Geomatics, XI'An University of Science and Technology, Xi'An 710054, China |
| |
| Abstract: | This paper proposes a one-step solution of local tie vectors,the solution takes RP (Reference Point) and axes offsets of SLR telescope as unknown parameters,GNSS baselines network and conventional terrestrial observation (horizontal,vertical angle and distance) are combined in ITRF (International Terrestrial Reference Frame),and multiply constraint conditions are established between RP and observation marks and two axes offsets.Local tie vectors and related covariance matrices of the 3 colocated sites in Beijing,Kunming,Xi'an of CMONOC (Crustal Movement Observation Network of China) are solved with the proposed one step solution.The results show that the RMS (root mean square error) of local tie vectors is less than 2.0 mm.Besides,the differences are less than 2.0 mm compared with the traditional step by step solution,and the offsets and corresponding RMS between the horizontal axis and vertical axis are 3.8 mm,0.7 mm,3.6 mm and 1.3 mm,1.2 mm,1.3 mm,respectively. |
| |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《测绘学报》浏览原始摘要信息 |
| 点击此处可从《测绘学报》下载免费的PDF全文 |
|
