| 一种基于点云法向量的基准特征提取与倾斜分析方法 |
| |
| 引用本文： | 孙文潇,王健,靳奉祥,梁周雁.一种基于点云法向量的基准特征提取与倾斜分析方法[J].测绘通报,2019,0(3):155-158,162. |
| |
| 作者姓名： | 孙文潇 王健 靳奉祥 梁周雁 |
| |
| 作者单位： | 山东科技大学,山东 青岛,266590;山东科技大学,山东 青岛266590;山东建筑大学,山东 济南250101;山东省国土测绘院,山东 济南,250102 |
| |
| 基金项目： | 国家自然科学基金（41471330）；山东科技大学研究生创新基金（SDKDYC180310） |
| |
| 摘 要： | 针对目前将三维激光扫描技术应用于变形监测领域存在基准特征难以提取、点云数据分析缺乏适用的方法等问题,本文提出了一种基于点云法向量的基准特征提取与形变分析方法。首先利用局部平面拟合方法获得点云的法向量,并沿点云法矢方向探测基准点;然后利用三次B样条曲线对探测的正确基准点进行拟合;最后根据拟合曲线计算基准高程和对径点倾斜角分析基准特征形变信息。对某化工厂的罐体点云数据进行基准特征提取结果表明,该方法可以快速、全面地获取监测对象的整体信息,且能够正确分析监测对象的基准形变。
|
| 关 键 词： | 形变分析 点云 法向量 基准特征 三次B样条曲线 |
| 收稿时间： | 2019-01-20 |
A datum feature extraction and deformation analysis method based on normal vector of point cloud |
| |
| SUN Wenxiao,WANG Jian,JIN Fengxiang,LIANG Zhouyan.A datum feature extraction and deformation analysis method based on normal vector of point cloud[J].Bulletin of Surveying and Mapping,2019,0(3):155-158,162. |
| |
| Authors: | SUN Wenxiao WANG Jian JIN Fengxiang LIANG Zhouyan |
| |
| Institution: | 1. Shandong University of Science and Technology, Qingdao 266590, China;2. Shandong Jianzhu University, Jinan 250101, China;3. Shandong Provincial Institute of Land Surveying and Mapping, Jinan 250102, China |
| |
| Abstract: | In order to solve the problems of the existing difficulty of datum feature extraction and the lack of applicable analysis method of point cloud data in the application of three-dimensional laser scanning technology to the field of deformation monitoring,an efficient method for datum feature extraction and deformation analysis is proposed in this paper based on normal vector of point cloud.Firstly,owing to the local surface fitting obtains directly the geometric features by applying the point cloud model with low time complexity,this paper uses the local planar normal vector determined by the nearest neighbours of meet certain condition and follow the normal vector of the point cloud to detect the datum points.Then,the cubic B-spline curve fitting is performed on the datum points.To this end,elevation of the datum and the inclination angle of the radial point are calculated according to the fitted curve and then the deformation information is analyzed.The proposed approach is verified on real large-scale tank data set captured with terrestrial laser scanner in a chemical plant.The results show that the method could obtain the entire information of the monitor object quickly and comprehensively,and reflect the datum deformation accurately. |
| |
| Keywords: | deformation analysis point cloud normal vector datum feature cubic B-spline curve fitting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《测绘通报》浏览原始摘要信息 |
| 点击此处可从《测绘通报》下载免费的PDF全文 |
|
