首页 | 本学科首页   官方微博 | 高级检索  
     检索      

陆地惯性重力测量静态试验研究
引用本文:柴华,王虎彪,武凛,王勇.陆地惯性重力测量静态试验研究[J].大地测量与地球动力学,2015,35(6):953-956.
作者姓名:柴华  王虎彪  武凛  王勇
摘    要:利用高精度捷联式惯性测量设备开展测定重力场的初步静态试验,并对静态惯性重力测量影响因素作初步探讨。静态测试表明,基于试验采用IMU内置的石英挠性加速度计,在稳定的观测环境下通过30s的滑动平均滤波可以消除高频噪声,得到标准差约为1.5mGal的重力观测值,但仪器自身的不稳定性和环境变化引起的漂移会使重力观测值呈线性增大的趋势。针对该变化,通过回归分析进行拟合,并结合初始重力已知点上观测得到的初始偏移量,在车载试验中对零速修正点上的静态重力测量误差进行补偿,使大多数点上的重力观测精度由12~20mGal提升至优于2mGal。

关 键 词:惯性测量单元  重力测量  静态试验  误差补偿  

Land Based Inertial Gravimetry Research by Static Experiment
CHAI Hua,WANG Hubiao,WU Lin,WANG Yong.Land Based Inertial Gravimetry Research by Static Experiment[J].Journal of Geodesy and Geodynamics,2015,35(6):953-956.
Authors:CHAI Hua  WANG Hubiao  WU Lin  WANG Yong
Abstract:With data obtained from a high precision strapdown inertial measure unit, in this research, static experiments are carried out for the land based inertial gravimetry, initially examining the influence factors for static inertial gravimetry. Results from our static experiments show that with a moving average filter, most high frequency noise from the quartz flexible accelerometers is mitigated, and the corresponding standard deviation of gravity observation that derived from the test IMU is achieved at about 1.5 mGal with 30 s averaging. However, due to instrument instability and observation environment, an upward temporal trend in the observed gravity value can still be noticed. By modeling the temporal trend with regression analysis and detecting the initial unknown IMU observation bias from the beginning known gravity point, the error of observed gravity value can be calculated and compensated. Using this method, in our vehicle-based experiment the observation precision at most ZUPT points is successfully improved from 12-20 mGal to 2 mGal.
Keywords:inertial measure unit  gravimetry  static experiment  error compensation  
本文献已被 CNKI 等数据库收录!
点击此处可从《大地测量与地球动力学》浏览原始摘要信息
点击此处可从《大地测量与地球动力学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号