| 基于临界状态的边坡渐进破坏力学模型分析及应用 |
| |
| 引用本文： | 吴益平,卢里尔,薛阳.基于临界状态的边坡渐进破坏力学模型分析及应用[J].地质科技通报,2020,39(5):1-7. |
| |
| 作者姓名： | 吴益平 卢里尔 薛阳 |
| |
| 基金项目： | 国家自然科学基金项目41977244国家重点研发计划项目2017YFC1501301 |
| |
| 摘 要： | 边坡条分法物理意义是以强度折减表征材料峰值强度的下降程度。以不平衡推力部分强度折减法为例，推广传统假设，应用理想弹塑性模型和全过程剪应力-应变模型，在峰值剪应力和峰值应变相等条件下，模拟边坡的渐进破坏过程；提出了临界状态决定法，随着临界状态逐步移动，边坡不平衡力和驱动力越来越大，抗滑力越来越小，直至整体处于破坏状态。以湖北省恩施州稻池村边坡为例，以3种数值(部分强度折减、理想弹塑性和全过程剪应力-应变本构)模型揭示边坡渐进破坏过程中各参量变化特征。结果表明:3种数值条块法均能描述稻池村边坡渐进破坏过程，基于条分法和理想弹塑性模型部分强度折减系数大于全过程剪应力-应变本构模型稳定系数。
|
| 关 键 词： | 渐进破坏 部分强度折减法 本构模型 边坡 |
| 收稿时间： | 2020-02-27 |
Application of landslide progressive failure mechanical model based on the critical stress state |
| |
| Abstract: | According to the physical significance of the slice method of slope, the strength softening behavior of the geo-material is characterized by strength reduction coefficient. The unbalanced thrust method hypothesis is generalized. And during the same state of peak shear stress and strain, the progressive failure process of landslide is simulated by using the perfect elastic-plastic model (PEPM) and the complete process shear stress-strain constitutive model (CPCM). Then, a determination method with critical stress state is proposed, and the partial strength reduction method (PSRM) is employed. The unbalance thrust force and driving sliding force become greater and greater, and the frictional resistance gets smaller and smaller during the deformation failure process. Taking the Daochicun landslide located in Enshi, Hubei Province as an example, the evolution characteristics in progressive failure process are revealed by the proposed method with three sorts of numerical simulations (PSRM, PEPM and CPCM). Results show that:the proposed generalized slice block method with the three numerical simulations can describe the progressive failure process of the landslide, the factor of safety of the PSRM and PEPM are more than that of the CPCM. |
| |
| Keywords: | |
|
| 点击此处可从《地质科技通报》浏览原始摘要信息 |
| 点击此处可从《地质科技通报》下载免费的PDF全文 |
|
