首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
A background indoor air study has been completed which includes the collection of indoor air samples from office buildings and schools. The anonymous study was designed with input from the U.S. Environmental Protection Agency and the Massachusetts Department of Environmental Protection. The sampling was implemented in 2013, 2014, and 2015 and included the collection of 25 school building samples and 61 office building samples. The study generated 14,668 new indoor air background data points, with samples collected from buildings located in 26 cities in 18 states, including Arizona, California, Connecticut, Indiana, Kansas, Maine, Massachusetts, Minnesota, Montana, New Hampshire, New Jersey, New York, Nevada, North Carolina, Ohio, Texas, Utah, and Washington. Indoor air background concentrations of target compound volatile organic compounds (VOCs) ranged from less than the laboratory method reporting limit of 0.044 μg/m3 to concentrations up to 1190 μg/m3, with hydrocarbon ranges from less than the reporting method limit of 10 μg/m3 to concentrations up to 3000 μg/m3. Some VOCs were identified ubiquitously in indoor air background, and some were identified at concentrations which exceeded risk-based regulatory screening levels. These study results provide useful and updated information on indoor air background and air quality in offices and schools and can be used in future regulatory guidance update considerations, for further examination of relationships between these data and residential study data, in human health risk assessments and risk communication, and in planning future studies.  相似文献   

2.
In this study, a new strain of microorganism Shewanella putrefaciens was used for biofiltration of a pyridine laden air stream in a corn‐cob packed biotrickling filter. In the biotrickling filter tested with S. putrefaciens, the maximum removal of pyridine is determined to be 100% at less than the average inlet concentration of 0.653 g m–3 and more than 93% at a higher average inlet concentration of 1.748 g m–3 (phase VIII) with an empty bed residence time (EBRT) of 106 s. However, when the biotrickling filter was operated at a low EBRT of 53 s and almost the same average inlet concentration of 1.752 g m–3 (phase VII), the removal level attained was not greater than 85%. The maximum elimination capacity (EC) of the biotrickling filter was 102.34 g m–3h–1 at an inlet pyridine load of 119.62 g m–3h–1 with an EBRT of 53 s in phase VII. The maximum deviation of the EC from the 100% conversion line varied from 0.257 to 10.166% when going from phase I to VIII. Kinetic analysis showed that the maximum removal rate, rmax, and saturation constant, Ks, values for pyridine were calculated as 0.24 g m–3h–1 and 6.44 g m–3, respectively, with a correlation coefficient, R2, of 0.9939 and a standard deviation of error of 23.94%. The information contained herein indicates that the corn‐cob packed biotrickling filter inoculated by S. putrefaciens should provide excellent performance in the removal of gaseous pyridine.  相似文献   

3.
Indoor Air Quality Monitoring Improving Air Quality Perception   总被引：1，自引：0，他引：1  
Energy‐efficient ventilation strategies relating to good indoor air quality (IAQ) are a major task for building performance according to the requirements set by the energy performance of buildings directive (EPBD) in 2010. Applying demand‐controlled ventilation (DCV) in buildings, using sensors for IAQ control that enables variable airflow rates adapted to the actual indoor load conditions is one possibility to fulfill the requirements of adequate IAQ while reducing the energy consumption at the same time. CO2 concentrations above outdoors are generally used as an indicator for occupancy generated indoor air pollution and corresponding ventilation rates. The objective of this study is focused on a micromachined metal oxide semiconductor gas sensor module developed for IAQ control, based on volatile organic compound (VOC) detection. The sensor output was correlated with measured CO2 concentrations and quantified VOCs in 15 field scenarios. Energy demand and IAQ, applying the sensor module for DCV in an office, were compared to natural and time‐scheduled ventilation in the office. The study accentuates the need for DCV and proves the functionality of the sensor module for IAQ control at adequate comfort levels. Compared to time‐scheduled ventilation, 15% heating energy and 70% power consumption were saved with DCV.  相似文献   

4.
This study uses long‐term records of stream chemistry, discharge and air temperature from two neighbouring forested catchments in the southern Appalachians in order to calculate production of dissolved CO2 and dissolved inorganic carbon (DIC). One of the pair of catchments was clear‐felled during the period of the study. The study shows that: (1) areal production rates of both dissolved CO2 and DIC are similar between the two catchments even during and immediately after the period of clear‐felling; (2) flux of total inorganic carbon (dissolved CO2+ DIC) rises dramatically in response to a catchment‐wide acidification event; (3) DIC and dissolved CO2 are dominantly released on the old water portion of the discharge and concentrations peak in the early autumn when flows in the study catchments are at their lowest; (4) total fluvial carbon flux from the clear‐felled catchment is 11·6 t km−2 year−1 and for the control catchment is 11·4 t km−2 year−1. The total inorganic carbon flux represents 69% of the total fluvial carbon flux. The method presented in the study provides a useful way of estimating inorganic carbon flux from a catchment without detailed gas monitoring. The time series of dissolved CO2 at emergence to the stream can also be a proxy for the soil flux of CO2. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

5.
An experimental study based on the effects of fire on soil hydrology was developed at the Experimental Station of ‘La Concordia’ (Valencia, Spain). It is located on a calcareous hillside facing SSE and composed of nine erosion plots (4 × 20 m). In summer 2003, after eight years of soil and vegetation recovery from previous fires in 1995 (with three fire treatments: T1 high‐intensity fire, T2 moderate intensity, and T3 not burnt), experimental fires of low intensity were again conducted on the plots already burnt, to study the effects of repeated fires on the soil water infiltration, soil water content and runoff. Infiltration rates and capacities were measured by the mini‐disk infiltrometer method (MDI), assessing the effects of vegetation cover by comparing the under‐canopy microenvironment (UC) and its absence on bare soil (BS), immediately before and after the fire experiments. Soil properties like water retention capacity (SWRC) and water content (SWC) were also determined for the different fire treatments (T1, T2 and T3) and microsites (UC and BS). Hydrological parameters, such as runoff and infiltration rate, were monitored at plot scale from July 2002 to July 2004. In the post‐fire period, data displayed a 20% runoff increase and a decrease in infiltration (18%). Differences in the steady‐state infiltration rate (SSI) and infiltration capacity (IC) were tested with the MDI on the different treatments (T1, T2 and T3), and between the UC and BS microsites of each treatment. After fire, the SSI of the UC soil declined from 16 mm h−1 to 12 mm h−1 on T1, and from 24 mm h−1 to 19 mm h−1 on T2. The IC was reduced by 2/3 in the T1 UC soil, and by half on T2 UC soil. On the BS of T1 and T2, the fire effect was minimal, and higher infiltration rates and capacities were reached. Therefore, the presence/absence of vegetation when burnt influenced the post‐burnt infiltration patterns at soil microscale. On the T3, different rates and capacities were obtained depending on the microsites (UC and BS), with higher SSI (25 mm h−1) and IC (226 mm h−1) on BS than on UC (SSI of 18 mm h−1 and IC of 136 mm h−1). The SWRC and SWC were recovered from 1995 to 2003 (prior to the fires). The 2003 fire promoted high variability on the SWC at pF 0·1, 2 and 2·5, and the SWRC on burnt soils were reduced. To summarize, the IC and SSI post‐fire decreases were related to the lower infiltration rate at plot scale, the significant differences in the SWRC between burnt and control treatments, and the increase in the runoff yield (20%). According to the results, the MDI was a useful tool to characterize the soil infiltration on the vegetation patches of the Mediterranean maquia, and contrary to other studies, on the UC soil, the infiltration rate and IC, when soil was dry, were lower than that obtained on BS. Once the soil gets wet, similar values were found on both microenvironments. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

6.
Zeolites have been used for a long time for purification and catalytical purposes. Recently, first products appeared on the market using zeolites also for improving the indoor air quality so far volatile organic compounds (VOC) are concerned. However, porous compounds like zeolites can be found also in plaster material. Therefore, it was manifest to evaluate the capability of plaster with regard to air cleaning. In this article, the contribution of plaster compounds toward adsorption and catalytical decomposition of VOCs is evaluated using α‐pinene, chlorobenzene, 2‐ethoxyethylacetate, and pentanal as target substances under standard conditions (23°C, 50% r.H.). These compounds were chosen because of their VOC typical physicochemical properties like molecular dimensions, density, boiling point, vapor pressure, and octanol–water distribution coefficient (logkow). Hydrated lime and metakaolin were found out to have good adsorption properties under these circumstances. Also natural zeolites showed good results especially on pentanal. By investigations in environmental chambers the reduction potential of test plasters on chlorobenzene and 2‐ethoxyethylacetate concentrations could be shown. Application of coatings had no or only temporary influence on the performance of the plaster. Additional tests in small chambers demonstrated the possibility to improve the properties of plasters with help of FAU‐ or MFI‐type zeolites but the experiments also showed that α‐pinene and pentanal undergo chemical reactions. Further effort should be made on investigations also toward other compounds, especially more volatile ones like formaldehyde. Also additional building materials like insulation material or boards should be taken into account.  相似文献   

7.
Rainfall simulation was used to examine runoff generation and sediment transport on roads, paths and three types of agricultural fields in Pang Khum Experimental Watershed (PKEW), in mountainous northern Thailand. Because interception of subsurface flow by the road prism is rare in PKEW, work focused on Horton overland flow (HOF). Under dry antecedent soil moisture conditions, roads generated HOF in c. 1 min and have event runoff coefficients (ROCs) of 80 per cent, during 45 min, c. 105 mm h−1 simulations. Runoff generation on agricultural fields required greater rainfall depths to initiate HOF; these surfaces had total ROCs ranging from 0 to 20 per cent. Footpaths are capable of generating erosion‐producing overland flow within agricultural surfaces where HOF generation is otherwise rare. Paths had saturated hydraulic conductivity (Ks) values 80–120 mm h−1 lower than those of adjacent agricultural surfaces. Sediment production on roads exceeded that of footpaths and agricultural lands by more than eight times (1·23 versus < 0·15 g J−1). Typically, high road runoff volumes (owing to low Ks, c. 15 mm h−1) transported relatively high sediment loads. Initial road sediment concentrations exceeded 100 g l−1, but decayed with time as loose surface material was removed. Compared with the loose surface layer, the compacted, underlying road surface was resistant to detachment forces. Sediment concentration values for the road simulations were slightly higher than data obtained from a 165 m road section during a comparable natural event. Initial simulation concentration values were substantially higher, but were nearly equivalent to those of the natural event after 20 min simulation time. Higher sediment concentration in the simulations was related to differences in the availability of loose surface material, which was more abundant during the dry‐season simulations than during the rainy season natural event. Sediment production on PKEW roads is sensitive to surface preparation processes affecting the supply of surface sediment, including vehicle detachment, maintenance activities, and mass wasting. The simulation data represent a foundation from which to begin parameterizing a physically based runoff/erosion model to study erosional impacts of roads in the study area. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

8.
Urban populations are exposed to a high level of fine and ultrafine particles from motor vehicle emissions which affect human health. To assess the hourly variation of fine particle (PM2.5) concentration and the influence of temperature and relative humidity (RH) on the ambient air of Lucknow city, monitoring of PM2.5 along with temperature and RH was carried out at two residential locations, namely Vikas Nagar and Alambagh, during November 2005. The 24 h mean PM2.5 concentration at Alambagh was 131.74 μg/m3 and showed an increase of 13.74%, which was significantly higher (p < 0.05) than the Vikas Nagar level. The 24 h mean PM2.5 on weekdays for both locations was found to be 142.74 μg/m3 (an increase of 66.23%) which was significantly higher (p < 0.01) than the weekend value, indicating that vehicular pollution is one of the important sources of PM2.5. The mean PM2.5 at night for all the monitoring days was 157.69 μg/m3 and was significantly higher (p < 0.01) than the daytime concentration (89.87 μg/m3). Correlation and multiple regressions showed that the independent variables, i. e., time, temperature, and RH together accounted for 54%, whereas RH alone accounted for 53% of total variations of PM2.5, suggesting that RH is the best influencing variable to predict the PM2.5 concentration in the urban area of Lucknow city. The 24 h mean PM2.5 for all the monitoring days was found to be higher than the NAAQS recommended by the US‐EPA (65 μg/m3) and can be considered to be an alarming indicator of adverse health effects for city dwellers.  相似文献   

9.
Permeable pavements and similar stormwater control devices have not been exploited in the UK, in part because their adoption has been hindered by a lack of detailed knowledge of their hydrological performance. This paper describes a research programme that produced detailed information on the hydrological behaviour of a car park surface. The study involved the construction of full‐scale permeable pavement model car park structures and a rainfall simulator for use in the laboratory. A monitoring procedure was developed in order to measure inputs and changes in drainage, storage and evaporation over short and long time‐scales (2 hours to 3 months). A range of simulated rainfalls, which varied in intensity and duration, was applied to the model car park surfaces. Hydrological processes were monitored over an 18‐month period. Results demonstrated that evaporation, drainage and retention in the structures were strongly influenced by the particle size distribution of the bedding material and by water retention in the surface blocks. In general, an average of 55% of a one‐hour duration, 15 mm h−1 rainfall event could be retained by an initially air‐dry structure. Subsequent simulations demonstrated that 30% of a one‐hour duration, 15 mm h−1 rainfall event could be stored by an initially wet structure (with a minimum time interval between rainfall applications of 72 hours). Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

10.
This paper presents new estimates of solute fluxes from five high Arctic glacier basins in Svalbard. These estimates are combined with data from two other glacier basins to assess the effectiveness of chemical denudation on Svalbard and to estimate rates of temporary (or transient) CO2 drawdown. We use a solute provenance model to partition solutes into marine, aerosol, atmospheric and crustal components and to estimate their annual fluxes. Crustally derived solute fluxes are equivalent to a mean chemical denudation rate of 350 Σmeq+ m−2 a−1 for Svalbard (range: 160–560 Σmeq+ m−2 a−1), which lies within the global range of 94–4200 Σmeq+ m−2 a−1 for 21 glacier basins in the northern hemisphere, and is close to the continental average of 390 Σmeq+ m−2 a−1. Specific annual discharge is the most significant control upon chemical denudation in the glacierized basins, and basin lithology is an important secondary control, with carbonate‐rich and basaltic lithologies currently showing the greatest chemical denudation rates. Estimates of transient CO2 drawdown are also directly associated with specific annual discharge and rock type. On Svalbard transient CO2 drawdown lies in the range 110–3000 kg C km−2 a−1, whilst the range is 110–13000 kg C km−2 a−1 for the northern hemisphere glacial data set. Transient CO2 drawdown is therefore usually low in the Svalbard basins unless carbonate or basalt rocks are abundant. The analysis shows that a large area of uncertainty in the transient CO2 drawdown estimates exists due to the non‐stoichiometric release of solute during silicate hydrolysis. Silicate hydrolysis is particularly non‐stoichiometric in basins where the extent of glacierization is high, which is most probably an artefact of high flushing rates through ice‐marginal and subglacial environments where K‐feldspars are undergoing mechanical comminution. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

11.
Carbon bearing materials derived from rice husk (RH) have long been recognized as sorbents for diverse chemicals – both organic and inorganic. This work presents an overview of studies demonstrating a single step process of carbonization of chemically pretreated RH to produce metal impregnated silica‐carbon char designated as silicarbon materials that can be utilized in sorbing out water‐borne organic and inorganic hazardous substances (such as phenol, hexavalent chromium, fluoride, and arsenic) and air‐borne volatile organic chemicals (such as acetone, chloroform, benzene, and pyridine). The metal‐impregnated silicarbon solids derived from RH appear to constitute renewable, low‐cost, user‐friendly, and efficient materials for control systems for indoor air contamination and for industrial as well as non‐industrial hazardous aqueous pollution.  相似文献   

12.
Widespread observations of ecohydrological separation are interpreted by suggesting that water flowing through highly conductive soil pores resists mixing with matrix storage over periods of days to months (i.e., two ‘water worlds’ exist). These interpretations imply that heterogeneous flow can produce ecohydrological separation in soils, yet little mechanistic evidence exists to explain this phenomenon. We quantified the separation between mobile water moving through preferential flow paths versus less mobile water remaining in the soil matrix after free-drainage to identify the amount of preferential flow necessary to maintain a two water world's scenario. Soil columns of varying macropore structure were subjected to simulated rainfall of increasing rainfall intensity (26 mm h−1, 60 mm h−1, and 110 mm h−1) whose stable isotope signatures oscillated around known baseline values. Prior to rainfall, soil matrix water δ2H nearly matched the known value used to initially wet the pore space whereas soil δ18O deviated from this value by up to 3.4‰, suggesting that soils may strongly fractionate 18O. All treatments had up to 100% mixing between rain and matrix water under the lowest (26 mm h−1) and medium (60 mm h−1) rainfall intensities. The highest rainfall intensity (110 mm h−1), however, reduced mixing of rain and matrix water for all treatments and produced significantly different preferential flow estimates between columns with intact soil structure compared to columns with reduced soil structure. Further, artificially limiting exchange between preferential flow paths and matrix water reduced bypass flow under the most intense rainfall. We show that (1) precipitation offset metrics such as lc-excess and d-excess may yield questionable interpretations when used to identify ecohydrological separation, (2) distinct domain separation may require extreme rainfall intensities and (3) domain exchange is an important component of macropore flow.  相似文献   

13.
The United States Environmental Protection Agency (USEPA) is finalizing its vapor intrusion guidelines. One of the important issues related to vapor intrusion is background concentrations of volatile organic compounds (VOCs) in indoor air, typically attributed to consumer products and building materials. Background concentrations can exist even in the absence of vapor intrusion and are an important consideration when conducting site assessments. In addition, the development of accurate conceptual models that depict pathways for vapor entry into buildings is important during vapor intrusion site assessments. Sewer gas, either as a contributor to background concentrations or as part of the site conceptual model, is not routinely evaluated during vapor intrusion site assessments. The research described herein identifies an instance where vapors emanating directly from a sanitary sewer pipe within a residence were determined to be a source of tetrachloroethylene (PCE) detected in indoor air. Concentrations of PCE in the bathroom range from 2.1 to 190 µg/m3 and exceed typical indoor air concentrations by orders of magnitude resulting in human health risk classified as an “Imminent Hazard” condition. The results suggest that infiltration of sewer gas resulted in PCE concentrations in indoor air that were nearly two orders of magnitude higher as compared to when infiltration of sewer gas was not known to be occurring. This previously understudied pathway whereby sewers serve as sources of PCE (and potentially other VOC) vapors is highlighted. Implications for vapor intrusion investigations are also discussed.  相似文献   

14.
. Kaste  P. J. Dillon 《水文研究》2003,17(12):2393-2407
In‐lake retention of inorganic nitrogen species (nitrate and ammonium) was estimated from mass balances in five acid‐sensitive lakes in southern Norway and eight in southern Ontario, Canada, to evaluate an empirical in‐lake N retention (RN) model. This model is included in the First‐order Acidity Balance (FAB) model, which currently is used for calculation of critical acid loads and exceedances in many countries. To estimate in‐lake RN, the FAB model uses a recommended mass transfer coefficient (SN) of 5 m year−1, which mainly is derived from NO3− mass balances in Canadian lakes. To date, the in‐lake RN model has not been evaluated for large parts of Europe. At the Norwegian study sites receiving the highest N deposition (>120 meq m−2 year−1) the net in‐lake retention of inorganic N (TIN) exceeded the corresponding terrestrial retention by a factor of 1·1–2·6. Despite differences in N loading and hydrology at the Norwegian and Canadian sites, both the mean mass transfer coefficients for NO3− (SNO3; 6·5 versus 5·6 m year−1) and TIN (STIN; 7·9 versus 7·0 m year−1) were of comparable magnitude. Both mean values and ranges of SNO3 suggest that the default SN value presently recommended for FAB model applications seems valid over a large range in N inputs and areal water loads (qs). However, owing to the relatively few data available for lakes with high qs values (15–150 m year−1), it is recommended that more lakes within this range be included in future studies to obtain a more precise prediction of in‐lake N retention over a wide qs gradient. Also, when considering that the FAB model treats all inorganic N leaching from a catchment as NO3−, it seems reasonable to use a default STIN value instead of just SNO3 when estimating in‐lake RN. In that case, the in‐lake RN presently calculated by the FAB model might be slightly underestimated. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

15.
Different types of data can be collected to evaluate whether or not vapor intrusion is a concern at sites impacted with volatile organic compound (VOC) contamination in the subsurface. Typically, groundwater, soil gas, or indoor air samples are collected to determine VOC concentrations in the different media. Sample results are evaluated using a “multiple lines of evidence” approach to interpret whether vapor intrusion is occurring. Data interpretation is often not straightforward because of many complicating factors, particularly in the evaluation of indoor air. More often than not, indoor air sample results are affected by indoor or other background sources making interpretation of concentration‐based data difficult using conventional sampling approaches. In this study, we explored the practicality of compound‐specific isotope analysis (CSIA) as an additional type of evidence to distinguish between indoor sources and subsurface sources (i.e., vapor intrusion). We developed a guide for decision‐making to facilitate data interpretation and applied the guidelines at four different test buildings. To evaluate the effectiveness of the CSIA method for vapor intrusion applications, we compared the interpretation from CSIA to interpretations based on data from two different investigation approaches: conventional sampling and on‐site GC/MS analysis. Interpretations using CSIA were found to be generally consistent with the other approaches. In one case, CSIA provided the strongest line of evidence that vapor intrusion was not occurring and that a VOC source located inside the building was the source of VOCs in indoor air.  相似文献   

16.
《Marine pollution bulletin》2011,62(7-12):399-412
In order to quantify the spatial and seasonal variations of sediment oxygen consumption and nutrient fluxes, we performed a spatial survey in the south west lagoon of New Caledonia during the two major seasons (dry and wet) based on a network of 11 sampling stations. Stations were selected along two barrier reef to land transects representing most types of sediments encountered in the lagoon. Fluxes were measured using ex-situ sediment incubations and compared to sediment characteristics. Sediment oxygen consumption (SOC) varied between 500 and 2000 μmol m−2 h−1, depending on season and stations. Nutrient effluxes from sediment were highly variable with highest fluxes measured in muddy sediments near the coast. Inter-sample variability was as high as seasonal differences so that no seasonally driven temperature effect could be observed on benthic nutrient fluxes in our temperature range. Nutrient fluxes, generally directed from the sediment to the water column, varied between −5.0 and 70.0 μmol m−2 h−1 for ammonia and between −2.5 and +12.5 μmol m−2 h−1 for PO4 and NO2+3. SOC and nutrient fluxes were compared to pelagic primary production rates in order to highlight the tight coupling existing between the benthic and pelagic compartments in this shallow tropical lagoon. Under specific occasions of low pelagic productivity, oxygen sediment consumption and related carbon and nutrient fluxes could balance nearly all net primary production in the lagoon. These biogeochemical estimates point to the functional importance of sediment biogeochemistry in the lagoon of New Caledonia.  相似文献   

17.
Past studies of entrapped air dissolution have focused on one‐dimensional laboratory columns. Here the multidimensional nature of entrapped air dissolution was investigated using an indoor tank (180 × 240 × 600 cm3) simulating an unconfined sand aquifer with horizontal flow. Time domain reflectometry (TDR) probes directly measured entrapped air contents, while dissolved gas conditions were monitored with total dissolved gas pressure (PTDG) probes. Dissolution occurred as a diffuse wedge‐shaped front from the inlet downgradient, with preferential dissolution at depth. This pattern was mainly attributed to increased gas solubility, as shown by PTDG measurements. However, compression of entrapped air at greater depths, captured by TDR and leading to lower quasi‐saturated hydraulic conductivities and thus greater velocities, also played a small role. Linear propagation of the dissolution front downgradient was observed at each depth, with both TDR and PTDG, with increasing rates with depth (e.g, 4.1 to 5.7× slower at 15 cm vs. 165 cm depth). PTDG values revealed equilibrium with the entrapped gas initially, being higher at greater depth and fluctuating with the barometric pressure, before declining concurrently with entrapped air contents to the lower PTDG of the source water. The observed dissolution pattern has long‐term implications for a wide variety of groundwater management issues, from recharge to contaminant transport and remediation strategies, due to the persistence of entrapped air near the water table (potential timescale of years). This study also demonstrated the utility of PTDG probes for simple in situ measurements to detect entrapped air and monitor its dissolution.  相似文献   

18.
Excessive terrestrial nutrient loadings adversely impact coral reefs by primarily enhancing growth of macroalgae, potentially leading to a phase‐shift phenomenon. Hydrological processes and other spatial and temporal factors affecting nutrient discharge must be examined to be able to formulate effective measures for reducing nutrient export to adjacent reefs. During storm events and baseflow periods, water samples were obtained from the tropical Todoroki River, which drains an intensively agricultural watershed into Shiraho coral reef. In situ nutrient analyzers were deployed for 6 months to hourly measure dissolved nutrient (NO3−‐N and PO43−‐P) concentrations. Total phosphorus (TP) and suspended solid concentration (TSS) were increased by higher rainfall intensity (r = 0·94, p < 0·01) and river discharge Q (r = 0·88, p < 0·01). In contrast, NO3−‐N concentration tends to decrease drastically (e.g. from 3 to 1 mg l−1) during flood events. When base flow starts to dominate afterwards, NO3−‐N manifested an increasing trend, but decreases when baseflow discharge becomes low. This counter‐clockwise hysteresis for NO3−‐N highlights the significant influence of groundwater discharge. N delivery can therefore be considered a persistent process compared to sediment and P discharge, which are highly episodic in nature. Based on GIS analysis, nutrient concentration along the Todoroki River was largely affected by the percentage of sugarcane/bare areas and bedrock type. The spatial distribution of N concentration in the river reflects the considerable influence of subsurface geology—higher N levels in limestone‐dominated areas. P concentrations were directly related to the total length of artificial drainage, which enhances sediment transport. The use of high‐resolution monitoring data coupled with GIS‐based spatial analysis therefore enabled the clarification of control factors and the difference in the spatio‐temporal discharge characteristics between N and P. Thus, although erosion‐reduction schemes would reduce P discharge, other approaches (e.g. minimize fertilizer) are needed to reduce N discharge. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

19.
In this study, 5,17‐bis‐[(4‐benzylpiperidine)methyl]‐25,26,27,28‐tetrahydroxy‐calix[4]arene ( 3 ) has been prepared by the treatment of calix[4]arene with a secondary amine (4‐benzylpiperidine) and formaldehyde by means of Mannich reaction. The prepared Mannich base ( 3 ) has been grafted onto [3‐(2,3‐epoxypropoxy)‐propyl]‐trimethoxysilane‐modified Fe3O4 magnetite nanoparticles (EPPTMS‐MN) in order to obtain 5,17‐bis‐[(4‐benzylpiperidine)methyl]‐25,26,27,28‐tetrahydroxy calix[4]arene‐grafted EPPTMS‐MN (BP‐calix[4]arene‐grafted Fe3O4). All new compounds were characterized by a combination of FTIR and 1H‐NMR analyses. The morphology of the magnetic nanoparticles was examined by transmission electron microscopy. Moreover, the studies regarding the removal of arsenate and dichromate ions from the aqueous solutions were also carried out by using 5,17‐bis‐[(4‐benzylpiperidine)methyl]‐25,26,27,28‐tetrahydroxy‐calix[4]arene in liquid–liquid extraction and BP‐calix[4]arene‐grafted Fe3O4 ( 4 ) in solid–liquid extraction experiments. The extraction results indicated that 3 is protonated at proton‐switchable binding sites in acidic conditions. Hence, facilitating binding of arsenate and dichromate is resulted from both electrostatic interactions and hydrogen bonding. To understand the selectivity of 3 , the retention of dichromate anions in the presence of Cl−, NO, and SO anions at pH 1.5 was also examined.  相似文献   

20.
The effects of wind-driven rain (WDR) on sand detachment were studied under various raindrop obliquities. Results suggested a significant reduction in compressive stress on sand surfaces for a two-dimensional experimental set-up in a wind tunnel. During experiments, sand particles in splash cups were exposed to both wind-free rain (WFR) and WDR driven by horizontal winds of 6.4, 8.9 and 12.8 m s−1 and rainfall intensities of 50, 60, 75 and 90-mm h−1 to assess the sand detachment rate (D, in g m−2 s−1). The effects of sand moisture state (dry and wet) on the detachment of different-sized particles (0.20–0.50 and 0.50–2.00 mm, respectively) were also tested. Factorial analysis of variance showed that shear and compressive stress components evaluated by horizontal and vertical kinetic energy flux terms (KEx and KEy, respectively, in J m−2 s−1) along with their vector sum (KEr, in J m−2 s−1) explained the variation in D. Neither sand size nor sand moisture was statistically significant alone although binary interactions of KEr, KEx and KEy with the sand size and three-way interaction of KEx, sand size and moisture were statistically significant. These results can be explained by size-dependent variation in sand compressibility and surface friction related to the total stress field developed by a given partition of shear and compressive stresses of wind-driven oblique raindrops (KEx/KEy). Further analysis of the variation of the unit sand detachment rate (Du = D/KEr = g J−1) with rain inclination (α, in degrees) better revealed the effect of WDR obliquity on Du that further changed with sand size class and moisture state. Finally, the difference in the resulting stress field differentiable by the oblique raindrop trajectories of the experiment over sand surface significantly affected the non-cohesive particle detachment rates, to some extent interacted with size-dependent compressibility and interface shear strength of sand grains.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号