共查询到20条相似文献，搜索用时 734 毫秒
1.
船体板架结构在屈曲约束下的优化问题具有变量多和约束多的特点,且屈曲计算需借助有限元分析,属于大规模耗时优化问题,运用常规优化方法求解需要较高的计算成本。这里提出一种适用于屈曲约束下船体板架快速优化方法,该方法利用板格屈曲利用因子具有局部性的特点,对板格厚度自变量空间进行降维处理;利用板格屈曲利用因子对板格厚度具有单调性的特点,采用牛顿迭代方法求解其达到目标值的板格厚度;同时比较板格在相同重量增量下,加筋叠加板厚与仅加板厚对屈曲利用因子改善程度的大小决定是否加筋;通过两阶段的迭代寻优,快速获得最优的板厚以及防屈曲筋布置方案。某油船双层底优化结果显示,该方法能够在30步之内完成优化计算,优化效率高;优化方案相比原始方案减重达17.63%,绝大部分板格屈曲利用因子取值在0.9～1.0之间,材料得到充分利用。 相似文献
2.
The dynamic torsional buckling and post-buckling of elasto-plastic circular cylindrical shell isstudied.By the usage of the Bodner-Partom constitutive relation,the present visco-plastic problem is treat-ed as an orthotropic elastic problem.Based on the nonlinear large deflection shell therory,the governingdynamic buckling equation is solved by the Runge-Kutta method,and the critical buckling stress is deter-mined by the B-R criterion.The present paper is mainly focused on the imperfection sensitivity,the strainrate sensitivity,and the dynamic post-buckling characters for the shell loaded dynamically with a constantshear strain rate.Numerical results show that the critical shear stress and imperfection sensitivity will in-crease with the increase of strain rate.It is found that the elastic buckling stress is more sensitive toimperfection than the visco-plastic buckling.The present research also reveals some dynamic post-bucklingcharacters for the cylindrical shell,and it is shown that the shell will vibra 相似文献
3.
鉴于海底管道的服役水深越来越深,主要采用犁式挖沟机对预铺设于海床之上的海底管道采取后挖沟的方式将海底管道埋设于海床之下,以保护其免受不必要的损伤。针对后挖沟深度H是海底挖沟机的重要设计参数,也是影响管道悬跨的重要因素的问题,对SMD(UK)犁式挖沟机展开参数优化,确保作业过程中悬跨段管道在外部静水压力作用下,海底管道不会发生屈曲破坏。采用ABAQUS软件,分别建立了作业前和作业中两种工况下的悬跨模型,分析机械手对接触部分管道的损伤,结果显示,作业中的机械手对悬跨管道的损伤更大;同时,建立了作业中不同管径下,后挖沟深度对管道损伤的安全裕量关系曲线。进一步,结合作业中不同挖沟深度下的管跨段屈曲数值模型,对处于外部静水压力作用下的悬跨管的屈曲失效展开分析,结果显示,随着后挖沟深度的加大,不同管径下的悬跨段管道局部出现塑性压溃的临界压力值不断降低;管道外径的增大,降低了同一后挖沟深度下发生屈曲失效的压力值。最后,在后挖沟深度与外部静水压力组成的区域内,建立屈曲失效临界关系曲线,并划分出工作区和压溃区,为深海管道后挖沟埋管的施工提供工程参考。 相似文献
4.
海洋油气资源的运输主要通过海底管道进行,管道在工作时受到较大的温度荷载,会产生整体屈曲变形。深海管道设计中常采用人为装置触发一定程度的水平向整体屈曲变形,来释放轴向的温度应力,浮力装置是常用的触发方式之一。本文通过数值模拟研究,分析了不同浮力大小和不同浮力施加范围下,管道水平向整体屈曲的临界屈曲力,得出临界屈曲力随浮力大小和施加范围变化的情况;并研究了不同土体阻力下,浮力装置触发整体屈曲的效果。研究表明,水平向土体阻力较大时,浮力装置触发水平向整体屈曲的效果较好。浮力装置的触发效果对轴向土体阻力不敏感。 相似文献
5.
6.
海底管线是海洋石油的重要输运手段。为满足输送工艺的需要,正常工作条件下管线往往被施加较高的温度和压强,高温高压使管线内产生附加应力,当附加应力大于土体对管线的约束力时,管线就会发生整体屈曲。过度的水平向整体屈曲会导致截面产生较大的弯曲应力和压缩应变,对管线系统的安全运行造成威胁,因此需要对发生水平向整体屈曲后的管线进行验算。采用解析解法、规范法和有限元法对管线的整体屈曲进行分析,提出了应用临界屈曲荷载值域空间和值域下限来判断不同缺陷大小下管线是否发生水平向整体屈曲的方法。结合工程实例,分别采用内力控制标准和位移控制标准对管线水平向整体屈曲后是否失效进行了验算。研究指出,相较于位移标准,内力控制标准更为严格。 相似文献
7.
WANG Deyu CHEN Tieyun XIN Guonian
Associate Professor School of Naval Architecture Ocean Engineering Shanghai Jiaotong University 《中国海洋工程》1998,(2)
The impact buckling of a laminated composite bar is investigated in case of one of its endsmoving due to axial impact compression.The governing equations considering the first-order sheardeformation effect are derived by the Hamilton principle and solved by the finite difference method.Thecritical axial shortness is determined by the B-R cirterion.The given example is used to highlight the in-fluences of initial imperfection,impact velocity,stress wave and coupled stiffness.It is found that theunsymmetrically laminated bar has a quite different dynamic buckling behaviour from that of thesymmetrically laminated bar. 相似文献
8.
Slender piles embedded in soft ground or liquefied soil may buckle under vertical load. In this paper, both small- and large-scale model tests are conducted to investigate the buckling mechanisms of a slender pile and the lateral earth pressure acting on the pile. To observe the buckling of a slender pile, the strain-controlled loading method is adopted to apply a vertical load. When the two ends of a slender pile are hinged, the buckling mechanisms of small- and large-scale model tests are same. It should be noted that this applies only to a system with a small ratio of pile bending stiffness to soil bending stiffness. An applied vertical load increases with an increasing pile head settlement until it reaches the critical buckling load. By further increasing the pile head settlement, the measured load approaches the critical buckling load. In the large-scale model test, the measured lateral earth pressure (i.e., active and passive) acting on the slender pile varies linearly with the lateral pile displacement when the measured range is 3–5?m beneath the ground. A critical buckling calculation method has been adopted to compare with the conventional “m” method. The two-sided earth pressure calculation method can achieve more approximate results with the model test. 相似文献
9.
Offshore pipelines are usually buried to avoid damage from fishing activities and to provide thermal insulation. Provided that the buried pipelines are sufficiently confined in the lateral direction by the passive resistance of the trench walls, they may be subject to vertical buckling caused by a rise in temperature. Vertical buckling is usually called upheaval buckling because the heated pipeline is assumed to move upwards conventionally. However, the seabed may be very soft, especially where a pockmark or abyssal ooze appears. Consequently, under thermal compressive force, the pipeline may buckle downward and penetrate into the seabed because the downward soil resistance is small. In this study, we extended an analytical solution for vertical pipeline buckling on a rigid seabed to a soft seabed, and the effects of soil resistance on pipeline stability, buckling mode and amplitude are illustrated and analyzed. 相似文献
10.
Inelastic buckling of thick-walled circular conical shells under external hydrostatic pressure 总被引：1，自引：0，他引：1
The paper reports on a theoretical and an experimental study into the collapse of three thick-walled circular conical shells, which were tested to failure under external hydrostatic pressure. All three vessels failed by plastic non-symmetric bifurcation buckling. Two theoretical analyses were carried out, both based on the finite element method. One of the theoretical analyses was based on inelastic non-symmetric bifurcation buckling and the other analysis was based on plastic axisymmetric buckling. Both of these theoretical analysis and the experimental observations appeared to indicate that there is a link between plastic non-symmetric bifurcation buckling and plastic axisymmetric buckling. 相似文献
11.
1 .Introduction Many accidents of ocean and offshore structuresinvolve impact loadings .Some famous ship colli-sion cases arethe Tj rn Bridge (Sweden) ,the West Bridge of the Great Belt Link (Denmark) andtheMaracaibo Bridge (Venezuela) . Most studies usedthe Hertzian contact law(Zukaset al .,1982) tocalculate the impact force and analyze structures subjectedtoimpact loadings .Other alternative meth-ods such as the spring-dashpot and momentumbalance methods utilizedthe coefficient of rest… 相似文献
12.
Offshore pipelines operating under high pressure and temperature are subjected to upheaval buckling. Pipeline behaviour in upheaval buckling depends on a number of factors including the shape of pipeline imperfection, installation stresses, loading types, seabed sediment behaviour and the flexural stiffness of the pipe. Current method of predicting upheaval buckling is based on simplified shapes of pipeline imperfection developed for idealized seabed conditions. To account for the effect of internal pressure, the pressure load is represented using an equivalent temperature. However, the applicability of these idealizations on the prediction of upheaval buckling has not been well-investigated. In this paper, the three-dimensional finite element modelling technique is used to investigate the applicability of idealized shapes and their effects on the upheaval buckling of pipeline for a seabed condition at offshore Newfoundland in Canada. The finite element model is then used to conduct a parametric study to investigate the effects of installation stress, loading types, seabed parameters and the flexural stiffness of the pipe. Finally, a design chart is developed to determine the optimum height of seabed features to manage pipeline stability against upheaval buckling under different temperature and pressure loadings. 相似文献
13.
不埋海底管道在高温高压作用下,易发生水平向整体屈曲。实际工程中,常通过在管道路由上设置整体屈曲触发装置,实现对水平向整体屈曲的有效控制,其中以枕木法的成功应用最为多见。本文分析了枕木法的主要影响因素并验证了采用枕木法会出现管道屈曲段应力集中的现象,对比了枕木法、分布浮力法和枕木-浮力耦合法对管道整体屈曲变形规律的影响,采用数值模拟方法系统研究了枕木及浮力参数对管道水平向屈曲和后屈曲的影响规律。研究表明,在枕木两侧设置浮力段的人工触发装置可有效触发管道整体屈曲,同时促使管道虚拟锚固点间轴力的释放,降低了管道中屈曲段的应力,相较枕木法,枕木-浮力耦合法可将管道中的最大应力降低23%。 相似文献
14.
在深海环境中,海底管线不仅承受较高外压,还会因为海水及运输介质的常年侵蚀而形成腐蚀缺陷,而腐蚀缺陷往往会导致管道的外压承载力下降。基于壳体稳定性理论,建立了含有非对称局部壁厚减薄管道在外压作用下的屈曲压力理论公式。公式具有广泛的适用性,当内、外局部壁厚减薄深度相等时,可用于计算含有对称局部壁厚减薄管道屈曲压力,而当内部或外部缺陷深度为零时,便可用于计算只含外部或者内部腐蚀缺陷的管道屈曲压力。通过有限元分析验证了该公式的正确性,结果表明公式可以准确预测不同缺陷位置及尺寸时管道的屈曲压力。详细研究了局部壁厚减薄缺陷位置、长度和深度等参数对屈曲压力的影响。研究表明,局部腐蚀对管道的屈曲压力产生重要影响,尤其当腐蚀角度和深度较大时,在腐蚀形成初期就会造成管道的承载力急剧下降,并且管道的屈曲压力与缺陷的径向位置有关,腐蚀缺陷位于管道外侧时的屈曲压力明显大于其位于管道内侧时的屈曲压力。 相似文献
15.
International Maritime Organization (IMO) adopted a new regulation to request permanent means of access (PMA) for a regular inspection of ship structure. Horizontal platforms for an inspector to walk on should be provided at specified locations. The platform is attached perpendicular to longitudinal bulkheads or side shell like a common longitudinal stiffener. Since the platform is much wider than ordinary stiffeners, a mid-flat-bar is welded in the middle of the platform. The wide platform (i.e. the tall web plate) makes PMA structure prone to lateral torsional buckling prior to overall flexural Euler buckling subjected to axial compression. This study employs the Rayleigh-Ritz method to treat the elastic lateral-torsional buckling of the PMA structure. The deformation of the cross-section can be expressed using six independant parameters. Compared to the previous research for an ordinary stiffened plate (Hughes and Ma, 1996a), two additional parameters are employed to model the deformation of the mid flat bar. This study also proposes a new strain distribution of lateral bending introducing two respective neutral axes for the flange and the mid-flat-bar. Two mathematical models are developed for two cases; one without associated plating, and the other with both the plating and its rotational restraint. In the former, the coupling between the lateral torsional buckling (“tripping”) and the Euler buckling is investigated. In the latter, a plate rotational spring constant is suggested based on extended deformed shape of the plating. For each model, the validity of the proposed method is verified by a comparison with a number of linear buckling analyses carried out using the NASTRAN finite-element program. 相似文献
16.
未埋设的海底管道在高温高压运行条件下可能发生侧向屈曲,情况严重时影响海底管道的结构安全。侧向屈曲临界力作为判定海底管道发生侧向屈曲的重要依据,主要影响因素有初始缺陷、管土相互作用等。现有关于侧向屈曲临界力的公式并未考虑管土相互作用、缺陷不平直度和管道自身材料特性对侧向屈曲临界力的综合影响。建立含有通用几何初始缺陷海底管道的数值模型,使用Riks算法进行参数分析以研究极限侧向土壤阻力、管道缺陷不平直度和截面几何尺寸对海底管道侧向屈曲的具体影响。基于量纲分析法和多元线性回归,推导出海底管道侧向屈曲临界力关于上述3个影响参数的一般公式,并对该公式进行了检验,结果表明文中推导的公式在参数涵盖的研究范围内有效。 相似文献
17.
Yang Cao 《Marine Georesources & Geotechnology》2013,31(4):477-487
AbstractThe deep-water pipeline is the main means of transportation in offshore oil and gas development engineering. The deep-water pipeline may incur lateral global buckling due to the high temperature and pressure that are applied on the pipeline to ensure the contents’ liquidity. With the increasing operating water depth, a higher temperature and pressure are applied to the pipeline, causing large lateral deformation and a large bending moment. Due to the inhomogeneous distribution of the bending moment on the cross-section, different points on the cross-section will deform differently. This kind of deformation causes the cross-section to turn into an oval ring. The cross-section ovalization caused by global buckling was rarely analyzed in former engineering practice since the load is relatively low. With the increase in operation water depth and operation load, the ovality caused by global buckling is noticeable. This article analyzed cross-section ovalization caused by pipeline lateral global buckling with a numerical simulation method. The pipelines with different initial cross-section shapes were simulated, and the influence of several impact factors, including load, pipeline and soil factors on the ovality of the cross-section, were analyzed. The results show that the initial cross-section shape type has little effect on the pipeline ovalization pattern. The initial ovality of the pipeline with an oval ring cross-section shape has little influence on the residual ovality. Among all the factors analyzed in this paper, the pressure difference is the primary factor that should be considered in a pipeline ovalization check. 相似文献
18.
Lateral buckling is an important issue in unburied high-temperature and high-pressure (HT/HP) subsea pipelines systems. The imperfection–sleeper method is one of the most well-known methods used to control lateral buckling of HT/HP pipelines. Pipelines–sleeper–seabed numerical models are established and verified to analyze the buckling behavior of pipelines using the imperfection–sleeper method. The influence of six main factors on lateral buckling behavior is investigated in details based on the numerical results. Equations of buckling displacement (buckling displacement is defined by the final displacement of the middle point of the pipelines), critical buckling force, and buckling stress (Mises stress) are proposed using the gene expression programming technique. These equations show good accuracy and can be used to assist in the design of sleepers and assess the compressive and stress levels of pipelines. 相似文献
19.
20.
A finite element method is developed for the stiffened multi-layered airfoil/hydrofoil structure for the large deformation and finite strain problem. The kinematics of the airfoil/hydrofoil is set up. The Consistent Orthogonal Basis Function Space is applied for the airfoil/hydrofoil structure. Given the airfoil/hydrofoil configuration and boundary conditions, the basis function space can be uniquely determined, such that the diagonal mass matrix is obtained accurately and the basis functions are very identical with the mode shape functions of the structure. In order to satisfy the displacement compatibility condition between adjacent layers of the airfoil/hydrofoil, the traction degree-of-freedom is also induced.The post buckling analysis is presented for the wing (hydrofoil) structure of the underwater glider. The water pressure is applied on the outer surface and the critical buckling pressure is calculated. The post buckling equilibrium path is also given. The results are verified with ANSYS. The present study of the buckling analysis of the airfoil/hydrofoil under water pressure is helpful to the design of underwater glider. 相似文献