首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
This article presents a laboratory study of static behavior of silty-sand soils. The objective of this laboratory investigation is to study the effect of initial confining pressures and fines content on the undrained shear strength (known as liquefaction resistance) response, pore pressure, and hydraulic conductivity of sand–silt mixtures. The triaxial tests were conducted on reconstituted saturated silty-sand samples at initial relative density Dr = 15% with fines content ranging from 0 to 50%. All the samples were subjected to a range of initial confining pressures (50, 100, and 200 kPa). The obtained results indicate that the presence of low plastic fines in sand–silt mixture leads to a more compressible soil fabric, and consequently to a significant loss in the soil resistance to liquefaction. The evaluation of the data indicates that the undrained shear strength can be correlated to fines content (Fc), inter-granular void ratio (eg), and excess of pore pressure (Δu). The undrained shear strength decreases with the decrease of saturated hydraulic conductivity and the increase of fines content for all confining pressures under consideration. There is a relatively high degree of correlation between the peak shear strength (qpeak) and the logarithm of the saturated hydraulic conductivity (ksat) for all confining pressures.  相似文献   

2.
In order to study pore water response and static liquefaction characteristics of silty sand, which has previously experienced liquefaction, two series of monotonic triaxial tests were run on medium dense sand specimens (RD = 50%) at confining pressure of 100 kPa. In the first test series, the influence of the soil saturation under undrained static loading has been studied. It summarizes results of monotonic tests performed on Chlef sand at various values of the Skempton's pore pressure coefficient. Analysis of experimental results gives valuable insights on the effect of soil saturation on sand response to undrained monotonic paths. In the second series of tests, the overconsolidation influence on the resistance to the sands liquefaction has been realized on samples at various values of overconsolidation ratios (OCR). It was found that the increase of overconsolidation ratio (OCR) increases the resistance of sands to liquefaction.  相似文献   

3.
Abstract

This study aims to evaluate the relationship between saturated hydraulic conductivity with particle shape and packing density characteristics of silty sand soils. The article presents a series of hydraulics tests performed on three kinds of sand with different particles shapes (Chlef rounded sand, Fontainebleau sub-rounded sand and Hostun sub-angular sand) mixed with low plastic rounded Chlef silt in the range of 0–30% fines content. The sand–silt mixture samples were tested in the constant-head permeability device at a loose relative density (Dr = 18%) and a constant room temperature (T?=?20?°C). The obtained results indicate that the measured saturated hydraulic conductivity (Ks) correlates very well with the fines content (Fc), packing density in terms of [maximum void ratio “emax,” minimum void ratio “emin,” predicted maximum void ratio “emax”pr and predicted minimum void ratio “emin”pr] and particle shape characteristics ratios in terms of roundness ratio (Rr = Rhs/Rmixture) and sphericity ratio (Sr = Shs/Smixture) of the silty sand materials under consideration. Moreover, the analysis of the available data show a noticeable success in exploring the prediction of the saturated hydraulic conductivity (Ks) based on the particle shape and packing density characteristics (Rr, Sr, emax, and emin) of the studied sand–silt mixture samples.  相似文献   

4.
A series of undrained monotonic triaxial compression tests were performed on natural, medium-dense (relative density (RD) = 50%) Chlef sand containing 0.5% of non-plastic fines, under different confining pressures of 50 kPa, 100 kPa, and 200 kPa. This article focuses on distinctive states of the monotonic undrained response of sands, namely the critical state, the phase transformation state, the quasi-steady state, and the state of undrained instability (onset of flow liquefaction). Specimens were prepared using dry funnel pluviation and wet deposition to investigate the effect of the initial sand fabric on these states. The present data suggest that the initial fabric of the sand appears to have a significant effect on the undrained behavior in the early stages of shearing, with its influence vanishing at large strains. Wet deposition specimens demonstrate considerably larger undrained instability state strength than their dry funnel pluviation counterparts, and a unique critical state locus is reached by both dry funnel pluviation and wet deposition.  相似文献   

5.
ABSTRACT

The behavior of loose anisotropically consolidated calcareous sand obtained from an island in the South China Sea was investigated under undrained monotonic and cyclic loading in a hollow cylinder torsional apparatus. The tests were conducted on specimens which consolidated under various initial effective confining pressures and consolidation stress ratios. The monotonic test results show that the failure and phase transformation line are essentially independent of the consolidation conditions, while the initial contractive tendency of the specimens decreases with an increasing consolidation stress ratio. During monotonic loading of the anisotropically consolidated specimens, a same major principal stress direction is observed at the constant stress ratio lines up to the phase transformation line, irrespective of initial effective confining pressure. The cyclic strength of the sand increases with an increasing consolidation stress ratio. Moreover, a pronounced stress dependence is observed in the sand with higher consolidation stress ratio. During cyclic loading, the generated excess pore water pressure presents considerable fluctuations. The normalized terminal excess pore water pressure is described as a function of consolidation stress ratio. The tests show that the particle shape, rather than particle crushing, plays an important role in the monotonic and cyclic behaviors of the calcareous sand.  相似文献   

6.
  相似文献   

7.
This article presents a new approach to estimate hydraulic conductivity of soil from cone penetration test with pore water pressure measurement (referred to as CPTU hereafter). The proposed approach is based on the test result of the spherical cavity expansion of the soil at the tip of a pile. During the piezocone penetration, the flow shape of pore water around the tip of the cone is assumed to be a spherical crown and induced excess pore water is assumed to dissipate from the crown surface. Based on this assumption, a bi-linear relation between the piezocone sounding metric (which is the product of the pore water pressure ratio Bq and the tip resistance Qt) and the hydraulic conductivity index KD is derived to estimate the hydraulic conductivity of the soil layer. The derived approach expands the applicable range of existing approaches in the literature. It is demonstrated that the proposed approach can cover the entire tip angles of the cone and the modified equation can fit the CPTU test data well.  相似文献   

8.
The design of sand mats should be reviewed on the basis of excess pore pressure behavior, which can be obtained by combining the characteristics of soft ground with the permeability of the mats. In this study, a banking model test was performed using dredged sand as the mat material to investigate the hydraulic gradient distribution of sand mats. The results were compared with numerical analysis results utilizing Terzaghi's one-dimensional consolidation equation. The results showed that the pore pressure was influenced by an increase in the amount of settlement at the central part of the sand mat as the height of the embankment increased. The measured decrease of the pressure head due to the residing water pressure in the sand mat was delayed compared to the numerical analysis results. Accordingly, sand mats should be laid to reduce the increased hydraulic gradient at the central part of the embankment.  相似文献   

9.
The post-cyclic behavior of biogenic carbonate sand was evaluated using cyclic triaxial testing through a stress control method under different confining pressures between 50 to 600 kPa. The testing program included a series of isotropically and anisotropically consolidated, undrained triaxial compression and extension tests on samples of remolded calcareous Bushehr sand. Grading analyses (before and after each test) were used to examine the influence of particle breakage on post-cyclic behavior of Bushehr sand. The particle breakage commonly occurred in these soils even in lower values of confining pressure, yet there was not a clear correlation between the post-cyclic responses and particle breakage. Based on the present study, a concept is suggested for post-cyclic behavior of carbonate sand. It was observed that post-cyclic strength has a good correlation with cyclic stress ratio, type of consolidation, and value of residual cyclic strain. For all specimens, it is clear that the post-cyclic strength is greater than monotonic strength, irrespective of confining pressure and relative density.  相似文献   

10.
Extreme waves can induce seepage in a seabed and cause problems to marine structures in coastal regions. In this study, the seepage under cnoidal waves was studied using the transient seepage equation. An analytical solution is presented for the pore pressure in a seabed of defined thickness. Parametric studies were carried out to examine the influence of air content in the pore water, and of the soil hydraulic conductivity on the seepage. It has been shown that the air content and the soil hydraulic conductivity can affect the pore pressure response significantly. An increase in the air content or a decrease in the soil hydraulic conductivity will increase the magnitude of the pore pressure gradient and results in the pore pressure varying sharply. The liquefaction potential of a seabed under cnoidal waves is discussed. Consequently, comparative studies are carried out to show that the soil shear modulus and Poisson constant can influence the difference between the transient seepage equation and Biot's equation, and the transient seepage equation is a limit of Biot's equation.  相似文献   

11.
A stress path with continuous rotation of the principal stress direction and continuous alteration of amplitude of deviatoric stress difference under the interaction of wave and earthquake loading was proposed based on the characteristics of the stress path under wave and earthquake loading, respectively. Using a GDS dynamic hollow cylinder apparatus, a series of cyclic triaxial-torsional coupling shear tests were performed on Nanjing saturated fine sand via the stress path mentioned previously under different relative densities, effective initial confining pressures, plastic fines contents, and loading frequencies to study the development of excess pore water pressure (EPWP) of saturated sand under the interaction of wave and earthquake loading. It was found that the development of EPWP follows the trend of fast-steady-mutative-drastic, which is different from that under the cyclic triaxial test or wave loading. The number of cycles causing initial liquefaction (NL) of saturated sand increases remarkably with relative densities. However, the relationships between NL and effective initial confining pressures, plastic fines content, or loading frequencies are more complex.  相似文献   

12.
Abstract

The study of the unsaturated soils is a very complex field to which several researches in laboratory and on site are directed these last years. An experimental study aims to quantify the influence of the Skempton coefficient B characterizing the degree of saturation on the behavior of the granular sand to the liquefaction resistance of sand. The study is based on undrained triaxial tests performed on natural Chlef sand carried out at an initial relative density Dr = 50% under a confining pressure of 50, 100 and 200?kPa for Skempton coefficient B?=?10 to 92%. The results of the tests show that an increase of confining pressure leads to an increase of the shear stress of the samples. For the lower value of the degree of saturation results of our findings indicate an increase of the resistance to liquefaction; our results are in good agreement with others observed in several research projects conducted with other sands. The increase of Skempton coefficient B induces an increase of pore water pressure and a decrease of the shear strength. The pore pressure (u) increases with an exponential manner with the increase of the degree of saturation; while the residual shear strength (Rs) decreases with logarithmic manner with the increase of degree of saturation (B).  相似文献   

13.
Understanding the pore structure characteristics of tight gas sandstones is the primary purpose of reservoir evaluation and efforts to characterize tight gas transport and storage mechanisms and their controls. Due to the various pore types and multi-scale pore sizes in tight reservoirs, it is essential to combine several techniques to characterize pore structure. Scanning electron microscopy (SEM), nitrogen gas adsorption (N2GA), mercury intrusion porosimetry (MIP) and nuclear magnetic resonance (NMR) were conducted on tight sandstones from the Lower Cretaceous Shahezi Formation in the northern Songliao Basin to investigate pore structure characteristics systematically (e.g., type and size distribution of pores) and to establish how significant porosity and permeability are for different pore types. The studied tight sandstones are composed of intergranular pores, dissolution pores and intercrystalline pores. The integration of N2GA and NMR can be used as an efficient method to uncover full pore size distribution (PSD) of tight sandstones, with pore sizes ranging from 2 nm to dozens of microns. The full PSDs indicate that the pore sizes of tight sandstones are primarily distributed within 1.0 μm. With an increase in porosity and permeability, pores with larger sizes contribute more to porosity. Intercrystalline pores and intergranular/dissolution pores can be clearly distinguished on the basis of mercury intrusion and surface fractal. The relative contribution of intercrystalline pores to porosity ranges from 58.43% to 91.74% with an average of 79.74%. The intercrystalline pores are the primary contributor to pore space, whereas intergranular/dissolution pores make a considerably greater contribution to permeability. A specific quantity of intergranular/dissolution pores is the key to producing high porosity and permeability in tight sandstone reservoirs. The new two permeability estimation models show an applicable estimation of permeability with R2 values of 0.955 and 0.962 for models using Dmax (pore diameter corresponding to displacement pressure) and Df (pore diameter at inflection point), respectively. These results indicate that both Dmax and Df are key factors in determining permeability.  相似文献   

14.
Abstract

Surcharge preloading consolidation of soft soils often implements a layer of fully arranged aggregate materials. The volume of drained water is abundant at the early stage of consolidation, but it reduces at middle and later stages, during which the fully arranged sand blanket will be a waste. In this investigation, a concept of distributed sand blankets is proposed to save aggregate materials. A series of finite element analyses have been performed on layered soils with distributed sand blankets. A mixed type of drainage boundary is assigned to a representative model, where a half sand blanket is perfectly pervious and a half width of soil among sand blankets is impervious. From parametric study, it has been found that a pave ratio between sand blankets and the total soil width can be selected in a range of 40%–60%, which will save aggregates by approximately 50% but cause an increase of consolidation time by less than 10%. For a fixed pave ratio, more evenly spaced sand strips with smaller width should be employed to optimize the design. The effectiveness of distributed sand blankets is not influenced by the anisotropy of hydraulic conductivity, elastic modulus, Poisson’s ratio, and thickness in multiple soil layers.  相似文献   

15.
Based on the geotechnical investigation data of artificial island at Dalian Offshore Airport, the spatial distribution of the physical and mechanical properties of deposit soils was statistically analyzed. The field investigation revealed that the deposit soils could be subdivided into three strata, i.e., the top marine deposit stratum, middle marine-continental deposit stratum, and deep continental deposit stratum. Field and laboratory test results demonstrated that the marine deposit soils had high water content (31.2% < wn < 63.10%), large void ratio (0.88 < e0 < 1.75), low permeability (kv < 10?6 cm/s), flow-plastic state (IL > 1), under consolidated (OCR < 1), high compressibility (Es < 4 MPa), low shear strength (11.7 kPa < cu < 43.7 kPa), and low bearing capacity (0 < fak < 120 kPa), they could not be used as natural foundation. The marine-continental and continental deposits were normally consolidated to over-consolidated (OCR ≥ 1), medium compressibility (4 MPa < Es < 20 MPa), high shear strength (29.7 kPa < cu < 73.7 kPa), and high bearing capacity (fak > 120 kPa). In addition, regression analysis results showed that the compression ratio was positively correlated with the natural water content, the coefficient of vertical consolidation was negatively correlated with the plasticity index, and the coefficient of vertical permeability was positively correlated with the initial void ratio. The results of the field and laboratory tests were synthesized to provide a basis for reclamation design.  相似文献   

16.
Laboratory equipment has been built which will measure the permeability and thermal conductivity of deep-sea sediments at their in-situ conditions of hydrostatic pressure, temperature, and void ratio. The apparatus has the capability of uniaxially consolidating a sediment sample to simulate compaction within the sediment column, while exposing the specimen to hydrostatic pressures ranging from atmospheric to 62 MPa and to temperatures from 22 to 220°C. The equipment includes a hypodermic needle mounted vertically through the base of the pressure vessel from which thermal conductivity is determined by the needle probe method. The system also features a combination of dead-weight testers which produces a small hydraulic gradient across the sample and permits the measurement of sediment permeability at large hydrostatic pressures.The physical property data generated from this apparatus will be important in understanding the mechanisms of heat transfer through the ocean floor and in analysing the coupled flow of heat and pore fluid in the vicinity of a heat source, such as a radioactive waste canister, buried in the seabed.  相似文献   

17.
From this research, overconsolidated undrained and drained behaviors of specimens with high sand content were highly dilatant. According to the comparison results of laboratory tests, the deviator stresses of silty sand were greater than sandy silt due to high sand content under increasing OCRs, and both silty sand and sandy silt were presented strain softening tendency after failure under undrained loading. The pore water pressure increased with increasing fines content under increasing OCRs. Silty sand exhibited more dilatancy and increasing shear strength than sandy silt because pore water pressures of silty sand were lower than sandy silt under higher OCRs. In overconsolidated drained tests, silty sand is higher strength than sandy silt because silty sand has a lower volumetric strain and higher deviator stress than sandy silt under increasing OCRs. As the degree of overconsolidation increased, similar behaviors of silty sand and sandy silt observed that volumetric strain decreased to negative values due to dilatancy effect and low-cohesion under current effective confining pressures.  相似文献   

18.
A series of model tests were performed on steel- and Perspex-made suction caissons in saturated dense marine sand to explore installation and extraction behaviors. The extractions of the caisson were conducted by applying monotonic loading or by pumping water into the caisson. Responses of suction caissons to pullout rates, aspect ratios, and extraction manners were examined. Test results show that a cone-shaped subsidence region occurs around the suction caisson during the suction-assisted installation. The pullout bearing capacity of the suction caisson in sand is dominated by the loading rate and the loading manner. For the suction caisson subjected to monotonic loading, the maximum bearing capacity is reached at the pullout rate of about 20.0?mm/s. The mobilized vertical displacement corresponding to the pullout capacity increases with increasing the pullout rate. The passive suction beneath the suction caisson lid reaches the maximum value when the pullout bearing capacity is mobilized. In addition, during the suction caisson extracted by pumping water into the caisson, the maximum pore water pressure in the caisson is obtained under the displacement of approximately 0.04 times the caisson diameter. The absolute values of the maximum pore water pressures for the suction caissons approximately equal those of the maximum vertical resistances at the monotonic pullout rate of 5 mm/s. When the vertical displacements of the suction caissons with the aspect ratio of 1.0 and 2.0 reach 0.92 and 1.77 times the caisson diameter, respectively, the seepage failure occurs around the caissons. Using a scaling method, the test results can be used to predict the time length required for the prototype suction caisson to be extracted from the seabed.  相似文献   

19.
Characterization of the hydraulic property of a specific geomaterial is of fundamental importance in engineering design and application. This paper reports an experimental investigation to the hydraulic conductivity of a typical marine sand, i.e., calcareous sand, which becomes increasingly popular as sea-filling material for land reclamation or construction of artificial islands. A series of permeability tests have been performed using the calcareous sand collected from Nansha islands in South China Sea. Using the home-made permeability test apparatus (so-called velocity-controlled pressure-differential acquisition flow apparatus), the relationship between flow velocity and hydraulic gradient was obtained and the hydraulic conductivity of calcareous sand was then determined accordingly. The effects of important parameters, including particle shape and particle size distribution on the hydraulic conductivity of calcareous sand, were assessed. To investigate the effect of particle size distribution on the hydraulic conductivity of calcareous sand, two often-used parameters, i.e., nonuniformity coefficient and curvature coefficient were considered in this study. To quantitatively evaluate the irregularity of soil particle, a particle-shape parameter was introduced and it was able to consider sphericity and circularity of highly irregular particle. Two materials, namely, Fujian quartz sand and glass beads consisting of particles of characteristic shape, were also used in the permeability tests, and they were used to compare with calcareous sand. Through the comparison, the effect of particle shape of calcareous sand on its hydraulic conductivity was examined based on the newly introduced particle shape parameter. The test results indicate that the particle size distribution has a significant influence on the hydraulic conductivity of calcareous sand. The quite irregular particle shape is able to reduce the hydraulic conductivity of the calcareous sand. A comparative study of hydraulic conductivity between the theoretical prediction and experimental measurement was performed, and it is concluded that an improvement of theoretical model for prediction of the hydraulic conductivity of the porous media consisting of particles with highly irregular shapes, such as the calcareous sand, is still required.  相似文献   

20.
Abstract

For land reclamation using the conventional surcharge preloading method, a sand cap layer is often fully placed at the ground surface of ultra-soft compressible estuary or marine clays. A novel strategy of distributed sand caps is proposed to save cost associated with sand materials. At an early stage of consolidation, the drainage capacity of distributed sand caps is less than the drainage demand, whereas at a later stage, the capacity exceeds the demand. Hence, the overall drainage capacity of distributed sand caps is equivalent to the drainage demand. A numerical model is developed to study the effectiveness of the proposed technique, and calculations are compared against theoretical solutions. A parametric study is conducted to optimize design parameters. It has been found that distributed sand caps should be uniformly placed with a size of 3% of the total width and a spacing of 1 times the size, such that sand materials can be saved by up to 50% without compromising the consolidation efficiency (an increase of consolidation time by less than 5%). The use of distributed sand caps will be effective regardless of soil properties, including hydraulic conductivity, elastic modulus and Poisson’s ratio.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号