共查询到20条相似文献，搜索用时 31 毫秒
1.
Dispersion analysis is an important part of in-seam seismic data processing, and the calculation accuracy of the dispersion curve directly influences pickup errors of channel wave travel time. To extract an accurate channel wave dispersion curve from in-seam seismic two-component signals, we proposed a time–frequency analysis method based on single-trace signal processing; in addition, we formulated a dispersion calculation equation, based on S-transform, with a freely adjusted filter window width. To unify the azimuth of seismic wave propagation received by a two-component geophone, the original in-seam seismic data undergoes coordinate rotation. The rotation angle can be calculated based on P-wave characteristics, with high energy in the wave propagation direction and weak energy in the vertical direction. With this angle acquisition, a two-component signal can be converted to horizontal and vertical directions. Because Love channel waves have a particle vibration track perpendicular to the wave propagation direction, the signal in the horizontal and vertical directions is mainly Love channel waves. More accurate dispersion characters of Love channel waves can be extracted after the coordinate rotation of two-component signals. 相似文献
2.
目前人们利用4种基本的地震波现象研究地震各向异性,如横波双折射、面波散射、与传播方向有关的走时异常和PS转换波震相.本文利用面波散射产生的Quasi-Love（QL）波研究青藏高原上地幔顶部的各向异性结构特征.首先利用中国地震台网昌都（CAD）台记录的地震波形资料识别出产生QL波的路径,并利用合成地震记录和垂直偏振极性分析证实所观测到的为QL波,而不是高阶振型的Rayleigh波或其他体波震相;然后由Rayleigh波、Love波和QL波的群速度估算了各向异性结构横向变化的转换点;不同周期时,转换点的位置不同,这种频率依赖性还需要进一步的模拟研究.Love波向Rayleigh波耦合（产生QL波）的转换点位置揭示了青藏高原面波方位各向异性变化特征,并以南北向构造带的东西分段性、上地幔流引起的地球内力诱导岩石形变解释了青藏高原各向异性的东西向差异性. 相似文献
3.
Kirchhoff–Helmholtz (KH) theory is extended to synthesize two-way elastic wave propagation in 3D laterally heterogeneous, anisotropic media. I have developed and tested numerically a specialized algorithm for the generation of three-component synthetic seismograms in multi-layered isotropic and transversely isotropic (TI) media with dipping interfaces and tilted axes of symmetry. This algorithm can be applied to vertical seismic profile (VSP) geometries and works well when the receiver is located near the reflector interface. It is superior to ray methods in predicting elliptical polarization effects observed on radial and transverse components. The algorithm is used to study converted-wave propagation for determining fracture-related shear-wave anisotropy in realistic reservoir models. Results show that all wavefront attributes are strongly affected by the anisotropy. However, it is necessary to resolve a trade-off between the effects of fractures and formation dip prior to converted-wave interpretation. These results provide some assurance that the present scheme is sufficiently versatile to handle shear wave behaviour due to various generalized rays propagating in complex geological models. 相似文献
4.
MONIKA BREITZKE 《Geophysical Prospecting》1992,40(1):31-70
In spite of a geometrical rotation into radial and transverse parts, two- or three-component in-seam seismic data used for underground fault detection often suffer from the problem of overmoding ‘noise’. Special recompression filters are required to remove this multimode dispersion so that conventional reflection seismic data processing methods, e.g. CMP stacking techniques, can be applied afterwards. A normal-mode superposition approach is used to design such multimode recompression filters. Based on the determination of the Green's function in the far-field, the normal-mode superposition approach is usually used for the computation of synthetic single- and multi-mode (transmission) seismograms for vertically layered media. From the filter theory's point of view these Green's functions can be considered as dispersion filters which are convolved with a source wavelet to produce the synthetic seismograms. Thus, the design of multimode recompression filters can be reduced to a determination of the inverse of the Green's function. Two methods are introduced to derive these inverse filters. The first operates in the frequency domain and is based on the amplitude and phase spectrum of the Green's function. The second starts with the Green's function in the time domain and calculates two-sided recursive filters. To test the performance of the normal-mode superposition approach for in-seam seismic problems, it is first compared and applied to synthetic finite-difference seismograms of the Love-type which include a complete solution of the wave equation. It becomes obvious that in the case of one and two superposing normal modes, the synthetic Love seam-wave seismograms based on the normal-mode superposition approach agree exactly with the finite-difference data if the travel distance exceeds two dominant wavelengths. Similarly, the application of the one- and two-mode recompression filters to the finite-difference data results in an almost perfect reconstruction of the source wavelet already two dominant wavelengths away from the source. Subsequently, based on the dispersion analysis of an in-seam seismic transmission survey, the normal-mode superposition approach is used both to compute one- and multi-mode synthetic seismograms and to apply one- and multimode recompression filters to the field data. The comparison of the one- and two-mode synthetic seismograms with the in-seam seismic transmission data reveals that arrival times, duration and shape of the wavegroups and their relative excitation strengths could well be modelled by the normal-mode superposition approach. The one-mode recompressions of the transmission seismograms result in non-dispersive wavelets whose temporal resolution and signal-to-noise ratio could clearly be improved. The simultaneous two-mode recompressions of the underground transmission data show that, probably due to band-limitation, the dispersion characteristics of the single modes could not be evaluated sufficiently accurately from the field data in the high-frequency range. Additional techniques which overcome the problem of band-limitation by modelling all of the enclosed single-mode dispersion characteristics up to the Nyquist frequency will be mandatory for future multimode applications. 相似文献
5.
Pure-mode wave propagation is important for applications ranging from imaging to avoiding parameter tradeoff in waveform inversion. Although seismic anisotropy is an elastic phenomenon, pseudo-acoustic approximations are routinely used to avoid the high computational cost and difficulty in decoupling wave modes to obtain interpretable seismic images. However, such approximations may result in inaccuracies in characterizing anisotropic wave propagation. We propose new pure-mode equations for P- and S-waves resulting in an artefact-free solution in transversely isotropic medium with a vertical symmetry axis. Our approximations are more accurate than other known approximations as they are not based on weak anisotropy assumptions. Therefore, the S-wave approximation can reproduce the group velocity triplications in strongly anisotropic media. The proposed approximations can be used for accurate modelling and imaging of pure P- and S-waves in transversely isotropic media. 相似文献
6.
Channel waves generated in coal-seams and their reflections from discontinuities are widely used to indicate the tectonic and stratigraphic features of coal deposits, resulting in greater efficiency and safety in coal-mining. In the mining area of Ibbenbüren (F.R.G.) seam structures sometimes contain so-called mylonite zones, which are crushed coal deposits capable of binding gas. If mining hits a mylonite zone this would probably not only reduce output of the mine, but could even cause gas explosions. To investigate the influence of a mylonite zone on the propagation of channel waves, Rayleigh channel wave measurements for 2D analogue models were performed and synthetic seismograms of Love channel waves were calculated. Analogue modelling of the mylonite zone using Rayleigh seam waves within the seam was carried out using a perforation technique. Calculations were made to obtain an estimate of velocity reduction due to perforation. The results agree well with velocity values measured up to a perforation of 25% in a 2D epoxy resin model. Reflected channel wave energy was found by applying dispersion analysis in the case where the impedance reduction between the mylonite seam structure and the undisturbed seam was approximately 5%. The horizontal width of the mylonite structure was detectable from the time lag between reflected channel wave signals from both in-seam borders of the mylonite zone. Resolution of two discrete borders was possible for a width of 1.5 λ's. The influence of a vertical fault, positioned within the mylonite zone, could only poorly be resolved. Numerical model investigations of Love seam waves were concerned mainly with the variation of the horizontal width of the mylonite zone. Mylonite zones with dimensions of the order of 0.4 λ's allow definite statements about their widths from dispersion and spectral analyses. For zones with smaller widths down to 0.2 λ's, it was found that reflectivity and transmissivity analyses give a qualitative criterion for distinguishing a mylonite structure surrounding a fault from a pure fault. 相似文献
7.
目前在地震勘探频带范围内通常假设品质因子Q与频率无关,且呈衰减各向同性.事实上,相比较速度各向异性,介质的衰减各向异性同样不可忽视.本文将衰减各向异性和速度各向异性二者与常Q模型相结合,建立了黏弹性衰减VTI介质模型,并基于分数阶时间导数理论,给出了对应的本构关系和波动方程.利用均匀平面波分析和Poynting定理,推导出准压缩波qP、准剪切波qSV和纯剪切波SH的复速度、相速度、能量速度以及品质因子的解析表达式.对模型的正确性进行了数值验证,并分析了qP,qSV和SH波在介质中的传播特性.数值试验结果表明:本模型能够实现理想的恒定Q行为,表现了品质因子和速度的各向异性特征,显示出黏弹性增强将导致能量速度和相速度的频散曲线变化剧烈;速度和衰减各向异性参数与传播角度之间的耦合效应对qP,qSV和SH波的速度和能量影响明显;qP,qSV和SH波的频散曲线和波前面随着衰减各向异性强度的改变发生显著变化,其中耦合在一起的qP和qSV波变化趋势相同,而SH波与它们呈现相反的变化规律.本研究为从常Q模型角度分析地震波在衰减各向异性黏弹性介质中的传播特征奠定了理论基础. 相似文献
8.
以Carcione黏弹各向异性理论为基础,给出了适用于黏弹性具有任意倾斜对称轴横向各向同性介质(黏弹TTI介质)的二维三分量一阶速度-应力方程,采用旋转交错网格任意偶数阶精度有限差分格式求解该方程,并推导出了二维黏弹TTI介质完全匹配层(PML)吸收边界条件公式和相应的旋转交错网格任意偶数阶精度有限差分格式,实现了该类介质的地震波场数值模拟.数值模拟结果表明:该方法模拟精度高,边界吸收效果好,可以得到高精度的波场快照和合成记录;并且波场快照和合成记录能较好地反映地下介质的各向异性特征和黏弹性特征. 相似文献
9.
When treating the forward full waveform case, a fast and accurate algorithm for modelling seismic wave propagation in anisotropic inhomogeneous media is of considerable value in current exploration seismology. Synthetic seismograms were computed for P-SV wave propagation in transversely isotropic media. Among the various techniques available for seismic modelling, the finite-difference method possesses both the power and flexibility to model wave propagation accurately in anisotropic inhomogeneous media bounded by irregular interfaces. We have developed a fast high-order vectorized finite-difference algorithm adapted for the vector supercomputer. The algorithm is based on the fourth-order accurate MacCormack-type splitting scheme. Solving the equivalent first-order hyperbolic system of equations, instead of the second-order wave equation, avoids computation of the spatial derivatives of the medium's anisotropic elastic parameters. Examples indicate that anisotropy plays an important role in modelling the kinematic and the dynamic properties of the wave propagation and should be taken into account when necessary. 相似文献
10.
2008年11月10日在青海柴达木盆地北缘发生了大柴旦M_W6.3地震,为了研究该地震的区域地震波传播与地面运动特征,本文利用地质资料和地壳速度结构研究成果,构建了柴达木盆地及周边区域三维传播介质模型,采用有限差分方法模拟了大柴旦地震波场传播过程以及地面运动分布特征.结果表明,柴达木盆地对波场传播有明显影响,表现为地震波传入盆地后在边界产生次生面波,盆地沉积物对地震波具有围陷作用,地震地面运动在盆地内振幅增大、持时延长.模拟结果给出的地震地面运动峰值速度分布以及理论地震图均和观测结果符合较好,反映数值模拟较好地给出了观测地面运动的主要特征以及传播介质模型的合理性. 相似文献
11.
12.
在复杂区域应力场的作用下, 大范围扩容各向异性(extensive-dilatancy anisotropy, EDA)造成的裂隙定向排列形成了地壳内部介质的不均匀性。 因此, 地壳介质各向异性的描述不仅限于横向各向同性(transversely isotropic, TI)的理论。 我们首先利用自相关函数随机扰动得到水平向小尺度速度不均匀, 然后利用这种不均匀性描述地壳介质中EDA裂隙定向排列所造成的介质各向异性, 利用数值模拟弹性波在该介质中的传播过程验证了利用介质的不均匀性构建介质的各向异性是一个有效、 可靠的方法。 可以将此方法应用到复杂地壳介质结构中, 了解地震波在复杂地壳各向异性介质中的传播特征。 相似文献
13.
The coupling ray theory is usually applied to anisotropic common reference rays, but it is more accurate if it is applied to reference rays which are closer to the actual wave paths. If we know that a medium is close to uniaxial (transversely isotropic), it may be advantageous to trace reference rays which resemble the SH–wave and SV–wave rays. This paper is devoted to defining and tracing these SH and SV reference rays of elastic S waves in a heterogeneous generally anisotropic medium which is approximately uniaxial (approximately transversely isotropic), and to the corresponding equations of geodesic deviation (dynamic ray tracing). All presented equations are simultaneously applicable to ordinary and extraordinary reference rays of electromagnetic waves in a generally bianisotropic medium which is approximately uniaxially anisotropic. The improvement of the coupling–ray–theory seismograms calculated along the proposed SH and SV reference rays, compared to the coupling–ray–theory seismograms calculated along the anisotropic common reference rays, has already been numerically demonstrated by the authors in four approximately uniaxial velocity models. 相似文献
14.
THE APPLICATION OF PML BOUNDARY CODITIONS IN THE SIMULATION OF SEISMIC WAVE BY THE HIGH-ORDER STAGGERED-GRID FINITE DIFFERENCES AT THE TRANSVERSELY ISOTROPIC MEDIA 
下载免费PDF全文
下载免费PDF全文 In the realm of the numerical simulation, finite difference method and finite element method are more intuitive and effective than other simulation methods. In the process of simulating seismic wave propagation, the finite differences method is widely used because of its high computational efficiency and the advantage of the algorithm is more efficient. With the demand of precision, more and more researchers have proposed more effective methods of finite differences, such as the high-order staggered-grid finite differences method, which can restore the actual process of wave propagation on the premise of ensuring accuracy and improving the efficiency of operation. In the past numerical simulation of seismic wave field, different models of isotropic medium are mostly used, but it is difficult to reflect the true layer situation. With the research demand of natural seismology and seismic exploration, the research on anisotropic media is more and more extensive. Transversely isotropic(TI)media can well simulate the seismic wave propagation in the formation medium, such as gas-bearing sandstone, mudstone, shale et al., the character of TI media is reflected by introducing the Thomsen parameters to reflect its weak anisotropy of vertical direction by using Thomson parameter. Therefore, studying the process of seismic wave propagation in TI media can restore the true information of the formation to the greatest extent, and provide a more reliable simulation basis for the numerical simulation of seismic wave propagation. In the geodynamic simulation and the numerical simulation of the seismic wave field, under the limited influence of the calculation area, if no boundary conditions are added, a strong artificial boundary reflection will be generated, which greatly reduces the validity of the simulation. In order to minimize the influence of model boundaries on the reflection of seismic waves, it is often necessary to introduce absorbing boundary conditions. At present, there are three types of absorption boundary conditions: one-way wave absorption boundary, attenuation absorption boundary, and perfectly matched layer(PML)absorption boundary. In terms of numerical simulation of seismic waves, the boundary absorption effect of PML is stronger than the first two, which is currently the most commonly used method, and it also represents the cutting-edge development direction of absorption boundary technology. The perfectly matched layer absorbing boundary is effectively applied to eliminating the reflective waves from model boundaries, but for transversely isotropic medium, the effect of the absorbing is not very well. For this reason, the elastic dynamic wave equations in transversely isotropic media are derived, and we describe a second-order accurate time, tenth-order accurate space, formulation of the Madariaga-Virieux staggered-grid finite difference methods with the perfectly matched layer(PML)are given. In addition, we have established vertical transversely isotropic(VTI)media and arbitrary inclined tilted transversely isotropic(TTI)media models, using a uniform half-space velocity model and a two-layer velocity model, respectively. By combining the actual geoscience background, we set the corresponding parameters and simulation conditions in order to make our model more research-oriented. When setting model parameters, different PML thickness, incident angle, source frequency and velocity layer models were transformed to verify the inhibition of boundary reflection effect by PML absorption boundary layer. The implementations of this simulation show that the formula is correct and for the transversely isotropic(TI)media of any angular symmetry axis, when the thickness of the PML layer reaches a certain value, the seismic wave reflection effect generated by the artificial boundary can be well suppressed, and the absorption effect of PML is not subject to changes in incident angle and wave frequency. Therefore, the results of our study indicate that our research method can be used to simulate the propagation process of seismic waves in the transversely isotropic(TI)media without being affected by the reflected waves at the model boundary to restore the actual formation information and more valuable geological research. 相似文献
15.
Paul Sava 《Geophysical Prospecting》2012,60(1):29-48
Seismic waves propagate through the earth as a superposition of different wave modes. Seismic imaging in areas characterized by complex geology requires techniques based on accurate reconstruction of the seismic wavefields. A crucial component of the methods in this category, collectively known as wave‐equation migration, is the imaging condition that extracts information about the discontinuities of physical properties from the reconstructed wavefields at every location in space. Conventional acoustic migration techniques image a scalar wavefield representing the P‐wave mode, in contrast to elastic migration techniques, which image a vector wavefield representing both the P‐ and S‐waves. For elastic imaging, it is desirable that the reconstructed vector fields are decomposed into pure wave modes, such that the imaging condition produces interpretable images, characterizing, for example, PP or PS reflectivity. In anisotropic media, wave mode separation can be achieved by projection of the reconstructed vector fields on the polarization vectors characterizing various wave modes. For heterogeneous media, because polarization directions change with position, wave mode separation needs to be implemented using space‐domain filters. For transversely isotropic media with a tilted symmetry axis, the polarization vectors depend on the elastic material parameters, including the tilt angles. Using these parameters, we separate the wave modes by constructing nine filters corresponding to the nine Cartesian components of the three polarization directions at every grid point. Since the S polarization vectors in transverse isotropic media are not defined in the singular directions, e.g., along the symmetry axes, we construct these vectors by exploiting the orthogonality between the SV and SH polarization vectors, as well as their orthogonality with the P polarization vector. This procedure allows one to separate all three modes, with better preserved P‐wave amplitudes than S‐wave amplitudes. Realistic synthetic examples show that this wave mode separation is effective for both 2D and 3D models with strong heterogeneity and anisotropy. 相似文献
16.
Three-component seismic and geoelectrical in-mine surveys were carried out in Lyukobanya colliery near Miskolc, Hungary to determine the in situ petrophysical parameter distributions and to detect inhomogeneities in the coal seam. The seismic measurements comprise an underground vertical seismic profile, using body waves, and an in-seam seismic amplitude-depth distribution and transmission survey, using channel waves. The geoelectrical measurements are based on the drift- and seam-sounding method. Interval traveltime-, amplitude-, multiple-filter- and polarization analysis methods are applied to the seismic data. They lead to a five-layer model for the strata including the coal seam. The coal seam and two underlying beds act as a seismic waveguide. The layer sequence supports the propagation of both normal and leaky mode channel waves of the Love- and Rayleigh type. A calculation of the total reflected energy for each interface using Knott's energy coefficients shows that the velocity ranges of high reflection energy and of normal and leaky mode wavegroups coincide. The excitation of wavegroups strongly depends on the seismic source. A simultaneous inversion of a geoelectrical drift- and seam-sounding survey prevents misinterpretations of the seismic data by clearly identifying the low-velocity coal seam as a high-resistivity bed. Calculations of dispersion and sounding curves improve the resolution of the slowness and resistivity in each layer. Both diminished amplitudes and distortions in the polarization of transmission seismo-grams and decreasing resistivities in a geoelectrical pseudosection of the coal seam are related to an inhomogeneity. A calculation of synthetic seismograms for Love and Rayleigh channel waves with the finite-difference and the Alekseev-Mikhailenko method agrees well with the field data for the main features, i.e., particular arrivals in the wave train, wavegroups, velocities and symmetries or asymmetries. This in-mine experiment demonstrates that the simultaneous acquisition, processing and interpretation of seismic and geoelectrical data improve the lithological interpretation of petrophysical parameter distributions. Coal seam inhomogeneities can also be detected more reliably by the two independent surveys than by one alone. 相似文献
17.
Zehua Qiu Shunliang Chi Zhenming Wang Seth Carpenter Lei Tang Yanping Guo Guang Yang 《地震科学（英文版）》2015,28(3):209-214
At a sampling rate of 100 samples per second,the YRY-4 four-gauge borehole strainmeters(FGBS) are capable of recording transient strains caused by seismic waves such as P and S waves or strain seismograms. At such a high sampling rate, data from the YRY-4 strainmeters demonstrate fairly satisfactory self-consistency. The strain tensor seismograms demonstrate the senses of motion of P waves, that is, the type of seismic wave travels in the direction of the maximum normal strain change. The observed strain patterns of S waves significantly differ from those of P waves and should contain information about the source mechanism. Spectrum analysis shows that the strain seismograms are consistent with conventional broadband seismograms from the same site. 相似文献
18.
Marijan Dravinski 《地震工程与结构动力学》2003,32(5):653-670
Scattering of plane harmonic waves by a three‐dimensional basin of arbitrary shape embedded within elastic half‐space is investigated by using an indirect boundary integral equation approach. The materials of the basin and the half‐space are assumed to be the most general anisotropic, homogeneous, linearly elastic solids without any material symmetry (i.e. triclinic). The unknown scattered waves are expressed in terms of three‐dimensional triclinic time harmonic full‐space Green's functions. The results have been tested by comparing the surface response of semi spherical isotropic and transversely isotropic basins for which the numerical solutions are available. Surface displacements are presented for a semicircular basin subjected to a vertical incident plane harmonic pseudo‐P‐, SV‐, or SH‐wave. These results are compared with the motion obtained for the corresponding equivalent isotropic models. The results show that presence of the basin may cause significant amplification of ground motion when compared to the free‐field displacements. The peak amplitude of the predominant component of surface motion is smaller for the anisotropic basin than for the corresponding isotropic one. Anisotropic response may be asymmetric even for symmetric geometry and incidence. Anisotropic surface displacement generally includes all three components of motion which may not be the case for the isotropic results. Furthermore, anisotropic response strongly depends upon the nature of the incident wave, degree of material anisotropy and the azimuthal orientation of the observation station. These results clearly demonstrate the importance of anisotropy in amplification of surface ground motion. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
19.
VTI介质准P波旋转交错有限差分数值模拟 总被引：1，自引：0，他引：1
本文采用旋转交错网格差分格式对VTI（垂直对称轴的横向各向同性）介质准P波一阶应力-速度方程进行数值模拟。并在PML边界条件和稳定性条件下得出Marmousi等复杂模型的高精度波场快照和地震记录,分析了各向异性对地震波的影响。数值结果表明：旋转交错网格有限差分能获得高精度的地震模拟数据,PML边界有较好的吸收效果。 相似文献
20.
Acoustic transversely isotropic models are widely used in seismic exploration for P‐wave processing and analysis. In isotropic acoustic media only P‐wave can propagate, while in an acoustic transversely isotropic medium both P and S waves propagate. In this paper, we focus on kinematic properties of S‐wave in acoustic transversely isotropic media. We define new parameters better suited for S‐wave kinematics analysis. We also establish the travel time and relative geometrical spreading equations and analyse their properties. To illustrate the behaviour of the S‐wave in multi‐layered acoustic transversely isotropic media, we define the Dix‐type equations that are different from the ones widely used for the P‐wave propagation. 相似文献