首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Terre Adélie Craton displays superimposed strain fields related to the Neoarchean (2.6–2.4 Ga, M1) and Paleo-Mesoproterozoic (1.7–1.5 Ga, M2) metamorphic events. M1 is a regional granulite facies event, constrained by P-T modelling at ~0.8–1.0 GPa – 800–850 °C, followed by a decompressional retrogression in the upper amphibolite facies at ~0.6 GPa – 750 °C. M2 Stage 1 P-T peak is constrained at 0.6–0.7 GPa – 670–700 °C, followed by a steep P-T path down to 0.3 GPa – 550 °C. Retrogression after M2 PT peak occurred in a context of dextral shearing along the Mertz Shear Zone along with thrust motions within the eastern Terre Adélie Craton. In this paper, we present a series of 63 new 40Ar/39Ar ages of biotite and amphibole pairs in mafic rocks from a complete traverse of the Terre Adélie Craton. 40Ar/39Ar dating constrains M2 amphibolite facies metamorphism at a regional scale between 1700 and 1650 Ma, during stage 1 peak metamorphism. During retrogression, lower amphibolite facies recrystallization mainly occurred along vertical shear zones and mafic dykes between 1650 and 1600 Ma (Stage 2), followed by amphibolite to greenschist facies metamorphism until after 1500 Ma (Stage 3). At the scale of the Mawson continent, this event is related to the growth of an active margin above an oblique subduction zone. The supra-subduction model best explains opening of Dumont D'Urville and Hunter basins at 1.71 Ga followed by their rapid closure and metamorphism at 1.70 Ga. In this context, episodic shear zone reactivation and magmatic dyke emplacement led to a partial reequilibration of the 40Ar/39Ar system until <1500 Ma. This latter phase of mafic magmatism largely coincides with a hot spot event at the scale of the Gawler Craton and western Laurentia paleocontinent.  相似文献   

2.
The Sanbagawa metamorphic belt of southwest Japan is one of the type localities of subduction‐related high‐P metamorphism. However, variable pressure–temperature (P–T) paths and metabasic assemblages have been reported for eclogite units in the region, leading to uncertainty about the subduction zone paleo‐thermal structure and associated tectonometamorphic conditions. To analyse this variation, phase equilibria modelling was applied to the three main high‐P metabasic rock types documented in the region – glaucophane eclogite, barroisite eclogite and garnet blueschist – with modelling performed over a range of P, T, bulk rock H2O and bulk rock ferric iron conditions using thermocalc . All samples are calculated to share a common steep prograde P–T path to similar peak conditions of ～16–20 kbar and 560–610 °C. The results establish that regional assemblage variation is systematic, with the alternation in peak amphibole phase due to peak conditions overlapping the glaucophane–barroisite solvus, and bulk composition effects stabilizing blueschist v. eclogite facies assemblages at similar P–T conditions. Furthermore, the results reveal that a steep prograde P–T path is common to all eclogite units in the Sanbagawa belt, indicating that metamorphic conditions were consistent along strike. All localities are compatible with predictions made by a ridge approach model, which attributes eclogite facies metamorphism and exhumation of the Sanbagawa belt to the approach of a spreading ridge.  相似文献   

3.
Soil–water interaction is a pivotal process in many underwater geohazards such as underwater landslides where soil sediments gradually evolve into turbidity currents after interactions with ambient water. Due to the large deformations, multiphase interactions and phase changes this involves, investigations from numerical modelling of the transition process have been limited so far. This study explores a simple numerical replication of such soil–water mixing with respect to changes in average strength using smoothed particle hydrodynamics (SPH). A uniform viscoplastic model is used for both the solid-like and fluid-like SPH particles. The proposed numerical solution scheme is verified by single-phase dam break tests and multiphase simple shear tests. SPH combinations of solid-like and fluid-like particles can replicate the clay–water mixture as long as the liquidity index of the solid-like particles is larger than unity. The proposed numerical scheme is shown to capture key features of an underwater landslide such as hydroplaning, water entrainment and wave generation and thus shows promise as a tool to simulate the whole process of subaquatic geohazards involving solid–fluid transition during mass transport.  相似文献   

4.
Garnet in metapelites from the Wölz Complex of the Austroalpine crystalline basement east of the Tauern Window characteristically consists of two growth phases, which preserve a comprehensive record of the geothermal history during polymetamorphism. From numerical modelling of garnet formation, detailed information on the pressure–temperature–time (P–T–t) evolution during prograde metamorphism is obtained. In that respect, the combined influences of chemical fractionation associated with garnet growth, modification of the original growth zoning through intragranular diffusion and the nucleation history on the chemical zoning of garnet as P and T change during growth are considered. The concentric chemical zoning observed in garnet and the homogenous rock matrix, which is devoid of chemical segregation, render the simulation of garnet growth through successive equilibrium states reliable. Whereas the first growth phase of garnet was formed at isobaric conditions of ～3.8 kbar at low heating/cooling rates, the second growth phase grew along a Barrovian P–T path marked with a thermal peak of ～625°C at ～10 kbar and a maximum in P of ～10.4 kbar at ～610°C. For the heating rate during the growth of the second phase of garnet, average rates faster than 50°C Ma?1 are obtained. From geochronological investigations the first growth phase of garnet from the Wölz Complex pertains to the Permian metamorphic event. The second growth phase grew in the course of Eo-Alpine metamorphism during the Cretaceous.  相似文献   

5.
鄂尔多斯盆地东北缘陕晋蒙交界地区存在大量煤火高温烘烤形成的烧变岩。与原岩相比,烧变后的岩体结构破碎孔隙发育,在长期水–岩作用下,形成了大量危岩体。以陕北神木大柳塔地区的烧变岩为对象,开展了50次干湿循环试验,测试不同循环次数后烧变岩物理性质与力学性质及其变化,探讨不同烧变程度烧变岩劣化特性。结果表明：烧变岩质量、硬度、力学性质下降,表面亮度降低,粗糙度与红黄色度增强;基于低场核磁共振技术(NMR)测试,烧变岩孔隙体积比例曲线右移,最大孔径扩张;微孔向大孔转化,大孔含量与总孔隙率升高;烧变作用使岩体孔隙发育,且提高了烧变岩的抗侵蚀能力,降低了色度、质量、粗糙度、硬度、力学性质的变化程度。长期水–岩作用可对烧变岩的物理力学性质与孔隙结构造成明显改变,烧变程度与初始孔隙结构能够影响劣化效果。根据研究不同烧变岩的劣化过程,得出加固低烧变程度岩体表面、加固沉积层理与原有裂隙、堵塞高烧变程度岩体孔隙,可降低水-岩作用的侵蚀破坏强度。  相似文献   

6.
First-order factors controlling the textural and chemical evolution of metamorphic rocks are bulk composition and pressure–temperature–time (P–T–t) path. Although it is common to assume that major element bulk composition does not change during regional metamorphism, rocks with reaction textures such as corona structures record evidence for major changes in effective bulk composition (EBC) and therefore provide significant insight into the scale, pathways, and mechanisms of element transport during metamorphism. Quantifying changes in EBC is essential for petrologic applications such as calculation of phase diagrams (pseudosections). The progressive growth of complex corona structures on garnet and Al2SiO5 porphyroblasts in orthoamphibole-cordierite gneiss Thor-Odin dome (British Columbia, Canada) reduced the EBC volume of the rock during metamorphism and therefore had a dramatic effect on the evolution of the stable mineral assemblage. These rocks contain a chemical and textural record of metamorphic reactions and preserve 3D networks (reaction pathways) connecting corona structures. These coronal networks record long (>cm) length scales of localized element transport during metamorphism. P–T, T–X, and P–X pseudosections are used to investigate the control of effective bulk composition on phase assemblage evolution. Despite textural complexity and evidence for disequilibrium, mineral assemblages and compositions were successfully modeled and peak metamorphic conditions estimated at 750°C and 9 kbar. These results illustrate how textural and chemical changes during metamorphism can be evaluated using an integrated petrographic and pseudosection approach, highlight the importance of effective bulk composition choice for application of phase equilibria methods in metamorphic rocks, and show how corona structures can be used to understand the scale of compositional change and element transport during metamorphism.  相似文献   

7.
In the contact aureole of the Oligocene granodiorite of Cima di Vila, granitic pegmatites of Variscan age were strongly deformed during eo‐Alpine regional metamorphism, with local development of ultramylonites. In the ultramylonite matrix, consisting of quartz, plagioclase, muscovite and biotite, microstructures show grain growth of quartz within quartz ribbons, and development of decussate arrangements of mica. These features indicate that dynamic recrystallization related to mylonite development was followed by extensive static growth during contact metamorphism. K‐feldspar porphyroclasts up to 1.5 cm are mantled by myrmekite that forms a continuous corona with thickness of about 1 mm. In both XZ and YZ sections, myrmekite tubules are undeformed, and symmetrically distributed in the corona, and oligoclase‐andesine hosts have random crystallographic orientation. Myrmekite development has been modelled from the P–T–t evolution of the ultramylonites, assuming that the development of the ultramylonites occurred during eo‐Alpine metamorphism at c. 450 °C, 7.5 kbar, followed by contact metamorphism at c. 530 °C, 2.75 kbar. Phase diagram pseudosections calculated from the measured bulk composition of granitic pegmatite protolith indicate that the equilibrium assemblage changes from Qtz–Phe–Ab ± Zo ± Cpx ± Kfs during the ultramylonite stage to Qtz–Pl(An30–40)–Ms–Kfs–Bt(Ann55) during the contact metamorphic stage. The thermodynamic prediction of increasing plagioclase mode and anorthite content, change of white mica composition and growth of biotite, occurring during the end of the heating path, are in agreement with the observed microstructures and analysed phase compositions of ultramylonites. Along with microstructural evidence, this supports the model that K‐feldspar replacement by myrmekite took place under static conditions, and was coeval with the static growth accompanying contact metamorphism. Myrmekite associated with muscovite can develop under prograde (up‐temperature) conditions in granites involved in polymetamorphism.  相似文献   

8.
U-Pb monazite and zircon geochronology and calculated metamorphic phase diagrams from drill holes in the northern Gawler Craton, southern Australia, reveal the presence of ca. 1.45 Ga magmatism and metamorphism. Magmatism and granulite facies metamorphism of this age has not previously been recognised in the Gawler Craton. The magmatic rocks have steep LREE-enriched patterns and high Ga/Al values, suggesting they are A-type granites. Calculated metamorphic forward models suggest that this event was associated with high apparent thermal gradients and reached pressures of 3.2 -5.4 kbar and temperatures of 775-815℃. The high apparent thermal gradients may reflect pluton-enhanced metamorphism, consistent with the presence of A-type granites. The recognition of ca. 1.45 Ga tectonism in the northern Gawler Craton is added to a compilation of ca. 1.50 -1.40 Ga magmatism, shear zone reactivation, rift basin development and isotope resetting throughout the South and North Australian Cratons that shows that this event was widespread in eastern Proterozoic Australia. This event is stylistically similar to ca. 1.45 Ga A-type magmatism and high thermal gradient metamorphism in Laurentia in this interval and provides further support for a connection between Australia and Laurentia during the Mesoproterozoic. The tectonic setting of the 1.50-1.40 Ga event is unclear but may record rifting within the Nuna(or Columbia) supercontinent, or a period of intracontinental extension within a long-lived convergent setting.  相似文献   

9.
Fluid infiltration at great depth during regional metamorphism plays a major role in mass transport and is responsible for significant rheological changes in the rock. Calc-silicate rocks of the Kajalbas area of Delhi Fold Belt, Rajasthan, are characterised by foliation parallel alternate bands of amphibole-rich and clinopyroxene–plagioclase feldspar-rich layers of varying thicknesses (mm to decimetre thick). Textural relation suggests that the amphibole grains formed from clinopyroxene and plagioclase in the late phase of regional deformation. Algebraic analysis of the reaction textures and mineral compositions was performed with the computer program C-Space to obtain the balanced chemical reactions that led to the formation of amphibole-rich bands. The computed balanced reaction is 70.74 Clinopyroxene + 27.23 Plagioclase + 22.018 H2O + 5.51 K++ 1.00 Mg2++ 27.15 Fe2+ = 22.02 Amphibole + 67.86 SiO2 aqueous + 36.42 Ca2++ 8.98 Na+. The constructed reaction suggests that aqueous fluid permeated the calc-silicate rock along mm to decimetre thick channels, metasomatized the clinopyroxene–plagioclase bearing rocks to form the amphibole-rich layers. The regional deformation presumably created the fluid channels thereby allowing the metasomatic fluid to enter the rock system. The above reaction has large negative volume change for solid phases indicating reaction-induced permeability. Thermodynamic calculations suggest that the fluid–rock interaction occurred at 665 ±05°C and 6.6 ±0.25 kbar (corresponding to ～20 km depth). Textural modeling integrating the textural features and balanced chemical reaction of the calc-silicate rocks of Mesoproterozoic Phulad Shear Zone thus indicate that extremely channelled fluid flow was reaction enhanced and caused major change in the rock rheology.  相似文献   

10.
http://www.sciencedirect.com/science/article/pii/S1674987114000309   总被引：8，自引：2，他引：6  
In the early 1980s, evidence that crustal rocks had reached temperatures 〉1000 ℃ at normal lower crustal pressures while others had followed low thermal gradients to record pressures characteristic of mantle conditions began to appear in the literature, and the importance of melting in the tectonic evolution of orogens and metamorphic-metasomatic reworking of the lithospheric mantle was realized. In parallel, new developments in instrumentation, the expansion of in situ analysis of geological ma- terials and increases in computing power opened up new fields of investigation. The robust quantifi- cation of pressure （P）, temperature （T） and time （t） that followed these advances has provided reliable data to benchmark geodynamic models and to investigate secular change in the thermal state of the lithosphere as registered by metamorphism through time. As a result, the last 30 years have seen sig- nificant progress in our understanding of lithospheric evolution, particularly as it relates to Precambrian geodynamics.  相似文献   

11.
《Chemical Geology》2006,225(3-4):291-303
The Fe–Co–Ni–As–S system has been investigated by combining experimental data with data compiled from literature. The main focus is the phase relations and crystal chemistry of the monosulfide, pentlandite, gerdorffite–cobaltite, diarsenide, and skutterudite solid solutions.The phase relations along the Co(As, S)2–Ni(As, S)2 section has been constructed using literature data. There was reasonable agreement between the different data sets and it was possible to combine them into a unifying model showing the phase relations enveloping the gersdorffite–cobaltite solid solution.The compositional variations and the related changes in unit-cell parameters of these five Fe–Co–Ni-bearing solid solutions have been statistically analyzed. Comparison between the resulting coefficients and the effective ionic radius [Shannon, R.D., 1976. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides. Acta. Cryst. A32, 751–767.] of the substituting elements test assumptions made concerning valence, spin state, and metal–metal bonding.Monosulfide solid solution and pentlandite both behave in a way consistent with extensive metal–metal bonding. Fe causes significant relative unit-cell expansion; Co causes a large contraction of the unit cell and Ni a moderate contraction. This supports previously suggested bonding models arguing that 56 d electrons stabilize the pentlandite cube-cluster and one d electron from each metal atom participate in metal–metal bonding. Crystal chemical models explaining the variation in the metal/sulfur ratio in pentlandite by metal vacancies are challenged by the observation that excess sulfur increases the unit-cell size of pentlandite.In cobaltite–gersdorffite, diarsenide, and skutterudite, Co has less than half the structural impact than Ni, although both elements caused significant increases in some unit-cell parameters. This partly contradicts bonding models explaining the metal atoms to be in their divalent low-spin state in cobaltite–gersdorffite and the diarsenides, suggesting that the bonding situation is more complex than normally assumed. Substituting As with S causes an expected unit-cell increase in cobaltite–gersdorffite.  相似文献   

12.
During Hercynian low-pressure/high-temperature metamorphism of Palaeozoic metasediments of the southern Aspromonte (Calabria), a sequence of metamorphic zones at chlorite, biotite, garnet, staurolite–andalusite and sillimanite–muscovite grade was developed. These metasediments represent the upper part of an exposed tilted cross-section through the Hercynian continental crust. P–T information on their metamorphism supplements that already known for the granulite facies lower crust of the section and allows reconstruction of the thermal conditions in the Calabrian crust during the late Hercynian orogenic event. Three foliations formed during deformation of the metasediments. The peak metamorphic assemblages grew mainly syntectonically (S2) during regional metamorphism, but mineral growth outlasted the deformation. This is in accordance with the textural relationships found in the lower part of the same crustal section exposed in the northern Serre. Pressure conditions recorded for the base of the upper crustal metasediments are c. 2.5 kbar and estimated temperatures range from <350 °C in the chlorite zone, increasing to 500 °C in the lower garnet zone, and reaching 620 °C in the sillimanite–muscovite zone. Geothermal gradients for the peak of metamorphism indicate a much higher value for the upper crust (c. 60 °C km?1) than for the granulite facies lower crust (30–35 °C km?1). The small temperature difference between the base of the upper crust (620 °C at c. 2.5 kbar) and the top of the lower crust (690 °C at 5.5 kbar) can be explained by intrusions of granitoids into the middle crust, which, in this crustal section, took place synchronously with the regional metamorphism at c. 310– 295 Ma. It is concluded that the thermal structure of the Calabrian crust during the Hercynian orogeny – as it is reflected by peak metamorphic assemblages – was mainly controlled by advective heat input through magmatic intrusions into all levels of the crust.  相似文献   

13.
 Thermodynamic modelling of (1) osumilite solid solutions and (2) dehydration melting in pelitic compositions within the KFMASH system is quite successful in reproducing the invariant and univariant reactions determined in experimental studies. Even though rather preliminary, such melt thermodynamic models may be very useful in interpolating and extrapolating the limited information available from a small number of experimental runs. These methods allow the compositions of all phases to be monitored as a function of pressure, temperature and equilibrium phase assemblage for any desired bulk composition. Locating the higher variance phase fields (e.g. quadrivariant, quinivariant) is often difficult or impossible by inspection, but is made relatively easy using thermodynamic software such as thermocalc. In the KFMASH system the calculated partition of Fe and Mg between osumilite, garnet, cordierite, orthopyroxene and biotite are shown to be in good agreement with experimental and natural data and allow reliable calculation of mineral compositions coexisting with quartz-saturated and H2O-undersaturated melts for a variety of bulk compositions. These phase diagram calculations allow quite tight limits to be placed on the pressure, temperature and water activity conditions which accompanied metamorphism of natural osumilite occurrences in Nain, Namaqualand, and Rogaland. At fixed bulk composition, the initial melting of pelites by dehydration of biotite can occur via univariant, divariant or trivariant equilibria depending upon pressure of metamorphism. Of particular interest is that, for low pressures or more magnesian bulk compositions, fluid-absent melting begins by generating liquid from the high-variance assemblage biotite+cordierite+K-feldspar+ quartz. This type of modelling allows investigation, at least qualitatively, of the fine scale details of melt production as a function of changes in pressure, temperature and bulk composition. Received: 29 November 1995 / Accepted: 22 April 1996  相似文献   

14.
Recent petrological studies on high‐pressure (HP)–ultrahigh‐pressure (UHP) metamorphic rocks in the Moldanubian Zone, mainly utilizing compositional zoning and solid phase inclusions in garnet from a variety of lithologies, have established a prograde history involving subduction and subsequent granulite facies metamorphism during the Variscan Orogeny. Two temporally separate metamorphic events are developed rather than a single P–T loop for the HP–UHP metamorphism and amphibolite–granulite facies overprint in the Moldanubian Zone. Here further evidence is presented that the granulite facies metamorphism occurred after the HP–UHP rocks had been exhumed to different levels of the middle or upper crust. A medium‐temperature eclogite that is part of a series of tectonic blocks and lenses within migmatites contains a well‐preserved eclogite facies assemblage with omphacite and prograde zoned garnet. Omphacite is partly replaced by a symplectite of diopside + plagioclase + amphibole. Garnet and omphacite equilibria and pseudosection calculations indicate that the HP metamorphism occurred at relatively low temperature conditions of ~600 °C at 2.0–2.2 GPa. The striking feature of the rocks is the presence of garnet porphyroblasts with veins filled by a granulite facies assemblage of olivine, spinel and Ca‐rich plagioclase. These minerals occur as a symplectite forming symmetric zones, a central zone rich in olivine that is separated from the host garnet by two marginal zones consisting of plagioclase with small amounts of spinel. Mineral textures in the veins show that they were first filled mostly by calcic amphibole, which was later transformed into granulite facies assemblages. The olivine‐spinel equilibria and pseudosection calculations indicate temperatures of ~850–900 °C at pressure below 0.7 GPa. The preservation of eclogite facies assemblages implies that the granulite facies overprint was a short‐lived process. The new results point to a geodynamic model where HP–UHP rocks are exhumed to amphibolite facies conditions with subsequent granulite facies heating by mantle‐derived magma in the middle and upper crust.  相似文献   

15.
Importance of fracturing during retro-metamorphism of eclogites   总被引：3，自引：0，他引：3  
Presented textural and petrological data show that the deep to intermediate continental crust may fracture and that microfractures are the locus of fluid and mass transfer necessary for retrograde metamorphism. Kyanite eclogites from Ulsteinvik, Norway, underwent partial retrogression to granulite and amphibolite facies assemblages during near-isothermal exhumation from depths equivalent to more than 2.0 GPa at temperatures of 700–800 °C. Plagioclase-bearing assemblages, rich in hydrous phases, formed along margins of eclogite lenses and along mesoscopic fracture systems. Hydrated zones are from 1–50 cm thick, with adjacent wall-rock eclogite replaced by symplectites. At a low degree of reaction, the secondary minerals in the wall-rock are found along intra- and intergranular microfractures (typically 50–100 μm wide). Minerals filling the microfractures include orthopyroxene–plagioclase–spinel in garnet; plagioclase–sapphirine, plagioclase–corundum and plagioclase–spinel in kyanite; and diopside–plagioclase in omphacite. The microfractures are often arranged en echelon and are connected through microfaults. Releasing bends filled with amphibole and spinel form along microfaults in garnet. The faulting and fracturing caused localized chemical change in garnet: the damage zones close to faults are enriched in FeO and MnO with steep compositional gradients (8 wt% FeO over <20 μm). These FeO- and MnO-enriched zones form wedge-like structures around the tip of the faults (horsetail structures) and rose- or flame-like structures at sticking points along faults. They may represent examples of stress-induced chemical transport during fracture propagation. The change from dry to amphibole-bearing assemblages at the tip of the fracture, and fractures ending in splays of fluid inclusions trails, reflect the involvement of a fluid phase during fracture propagation. This suggests that the ‘dry’ granulite facies retrogression was also driven by fluid infiltration and that metamorphism at depth in collision zones may not be controlled by pressure and temperature alone.  相似文献   

16.
Almora Nappe in Uttarakhand, India, is a Lesser Himalayan representative of the Himalayan Metamorphic Belt that was tectonically transported over the Main Central Thrust (MCT) from Higher Himalaya. The Basal Shear zone of Almora Nappe shows complicated structural pattern of polyphase deformation and metamorphism. The rocks exposed along the northern and southern margins of this nappe are highly mylonitized while the degree of mylonitization decreases towards the central part where the rocks eventually grade into unmylonitized metamorphics.Mylonitized rocks near the roof of the Basal Shear zone show dynamic metamorphism (M2) reaching upto greenschist facies (～450 °C/4 kbar). In the central part of nappe the unmylonitized schists and gneisses are affected by regional metamorphism (M1) reaching upper amphibolite facies (～4.0–7.9 kbar and ～500–709 °C). Four zones of regional metamorphism progressing from chlorite–biotite to sillimanite–K-feldspar zone demarcated by specific reaction isograds have been identified. These metamorphic zones show a repetition suggesting that the zones are involved in tight F2 – folding which has affected the metamorphics. South of the Almora town, the regionally metamorphosed rocks have been intruded by Almora Granite (560 ± 20 Ma) resulting in contact metamorphism. The contact metamorphic signatures overprint the regional S2 foliation. It is inferred that the dominant regional metamorphism in Almora Nappe is highly likely to be of pre-Himalayan (Precambrian!) age.  相似文献   

17.
Cooling of the Earth's mantle since the Meso-Archean is predicted by thermal and petrological models to have induced a secular change in the composition of primary mantle-derived magmas-and thus bulk oceanic crust; in particular, suggesting a decrease in maficity over time. This hypothesis underpins several recent studies that have addressed key geological questions concerning evolving plate tectonic styles, the rates and timing of continental crust formation, comparative planetology, and the emergence of complex life on Earth. Major, minor, and trace element geochemical analyses of(meta)mafic rocks preserved in the geological record allows exploration of this theory, although no consensus currently exists about the magnitude of this change and what compositions-if anything-constitute representative examples of Paleo-, Meso-, or Neo-Archean primitive oceanic crust. In this work, we review the current state of understanding of this issue, and use phase equilibria to examine the different mineral assemblages and rock types that would form during metamorphism of basalt of varying maficity in subduction zone environments. The presence(or absence) of such metamorphic products in the geological record is often used as evidence for(or against) the operation of modern-day subductiondriven plate tectonics on Earth at particular time periods; however, the control that secular changes in composition have on the stability of mineral assemblages diagnostic of subduction-zone metamorphism weakens such uniformitarianistic approaches. Geodynamic interpretations of the Archean metamorphic rock record must therefore employ a different set of petrological criteria for determining tectonothermal histories than those applied to Proterozoic or Phanerozoic equivalents.  相似文献   

18.
This Special Issue comprises a selection of the papers given at a two‐day discussion meeting held at the University of Melbourne, Australia in June 2009 to celebrate Roger Powell’s 60th birthday. At this milestone, it is fitting to review Roger’s career to date. He has published ～200 scientific papers on topics that range from low‐ to high‐grade metamorphism, from low‐ to ultrahigh‐pressure (UHP) metamorphism, and from thermodynamics to kinetics. Most of Roger’s papers are multi‐authored and address important questions in the petrogenesis of metamorphic rocks. Roger is widely known for his work with Tim Holland to develop the most complete internally consistent dataset of thermodynamic properties of end members of phases necessary to undertake calculations on the conditions of formation and modification of metamorphic rocks. Additionally, Roger and Tim have developed activity–composition models for many of these phases, building on their important methodological developments in formulating such models. Roger is also responsible for the ongoing development of thermocalc , a thermodynamic calculation software package that may be used to undertake a wide range of phase diagram calculations, including P–T projections, P–T, P–X and T–X, compatibility diagrams and μ–μ diagrams. Together, Roger and Tim have changed the way we carry out quantitative phase equilibria studies. However, Roger’s contributions to metamorphic petrology go well beyond the development of phase equilibria methods and mineral thermodynamics. He has contributed significantly to our understanding of a range of metamorphic processes, and with an extensive array of co‐authors has shown how phase equilibria can be used to understand the evolution of metamorphic rocks in general terms as well as in specific terranes. The papers in this Special Issue cover the range from the stabilization of the continents to understanding the formation of orogenic gold deposits, from the stability of sapphirine–quartz‐bearing assemblages to the crystallization of melt in migmatites, from the effects of ferric iron and sulphur on the stability of metamorphic mineral assemblages in general to the effects of ferric iron and H2O on the stability of eclogite in particular, and to the quantification of UHP metamorphism. It is our hope that in reading these contributions, you will be stimulated to seek a better understanding of metamorphic processes and to improve our quantification of the variables in metamorphism.  相似文献   

19.
The high-temperature and high-pressure experiment on natural block rock indicates that dehydration-melting of hydrous biotite (Bi) and partial melting of felsic minerals in garnet-biotite-plagioclase gneiss are mainly controlled by temperature, while mineral phase transformation is not only controlled by temperature-pressure conditions but also genetically associated with hydrous mineral dehydration-melting and partial melting of felsic minerals. According to the characteristics of biotite dehydration-melting and garnet transformation reaction, three stages may be distinguished: (1) when the experimental temperature is 700℃, biotite transforms to ilmenite (Ilm) + magnetite (Mt) + H2O and garnet to magnetite (Mt); (2) when the temperature is 730-760℃, biotite is dehydrated and melted and transformed into K2O-rich melt + Ilm + Mt, and garnet, into hypersthene (Hy) + cordierite (Crd); (3) when the temperature is up to or higher than 790℃, biotite is dehydrated and melted and transformed into melt + Hy +  相似文献   

20.
The metamorphic rocks of the Ivrea Zone in NW Italy preserve a deep crustal metamorphic field gradient. Application of quantitative phase equilibria methods to metapelitic rocks provides new constraints on the P–T conditions recorded in Val Strona di Omegna, Val Sesia and Val Strona di Postua. In Val Strona di Omegna, the metapelitic rocks show a structural and mineralogical change from mica‐schists with the common assemblage bi–mu–sill–pl–q–ilm ± liq at the lowest grades, through metatexitic migmatites (g–sill–bi–ksp–pl–q–ilm–liq) at intermediate grades, to complex diatexitic migmatites (g–sill–ru–bi–ksp–pl–q–ilm–liq) at the highest grades. Partial melting in the metapelitic rocks is consistent with melting via the breakdown of first muscovite then biotite. The metamorphic field gradient in Val Strona di Omegna is constrained to range from conditions of ～3.5–6.5 kbar at ≈650 °C to ～10–12 kbar at >900 °C. The peak P–T estimates, particularly for granulite facies conditions, are significantly higher than those of most earlier studies. In Val Sesia and Val Strona di Postua, cordierite‐bearing rocks record the effects of contact metamorphism associated with the intrusion of a large mafic body (the Mafic Complex). The contact metamorphism occurred at lower pressures than the regional metamorphic peak and overprints the regional metamorphic assemblages. These relationships are consistent with the intrusion of the Mafic Complex having post dated the regional metamorphism and are inconsistent with a model of magmatic underplating as the cause of granulite facies metamorphism in the region.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号