首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 218 毫秒
1.
In order to evaluate the potentials of IRS‐1A Linear Imaging Self‐scanning Sensor (LISS‐I) data for geological and geomorphological applications and also to compare the IRS‐1A LISS‐I data with Landsat Thematic Mapper (TM) data, a study has been attempted for parts of Uttar Pradesh and Madhya Pradesh in Northern India. The first four spectral bands of Landsat TM sensor data which are similar and close to IRS‐1A LISS‐I senor have been utilised for the comparative evaluation. Various techniques employed for both the data set to derive the required geology and geomorphology related information include (i) band combination (ii) spectral response analysis (iii) principal component analysis (iv) supervised classification techniques and (v) visual observation of various outputs generated by the above methods. The Optimum Index Factor (OIF) method adopted for selecting suitable band combinations showed similar OIF rankings for IRS‐1A LISS‐I data and Landsat TM data. It has been visually observed that the band combination 1, 3 & 4 offers relatively better feature display. The spectral responses derived for various major geologic rock units such as Deccan Trap, Vindhyan Formation, Bundelkhand Granite and for a few landcovers such as surface water bodies and black soil show striking similarity in pattern for both LISS‐I and TM. The Principal Component (PC) analysis of both data sets suggested that the total scene brightness tends to dominate in the first PC. The percentage information contributed by PCs 1&2 as also by PCs 1,2 & 3 in both the LISS‐I and TM are comparable. It was observed from the classified image generated by performing supervised classification with a maximum likelihood algorithm that major geomorphic landforms were clearly distinguishable. Thus the qualitative and quantitative evaluation of both IRS‐1A LISS‐I and Landsat TM data showed that significant similarities exist between them. The study also revealed that IRS‐1A LISS‐I data can be effectively used for deriving geology and geomorphology related details.  相似文献   

2.
李大成  唐娉  胡昌苗  郑柯 《遥感学报》2014,18(2):307-319
Landsat 5卫星较低的时间分辨率(16天)使得其很难获得大区域的、时相一致的清晰影像数据集。本文发展了一种基于半物理模型的时空融合算法-即乘性调制融合算法,并借助多时序的MODIS反射率数据来生成多时相的Landsat TM/ETM+反射率合成影像,经镶嵌后得到区域尺度的高时空分辨率地表反射率数据集(Landsat TM/ETM+)。本文利用吉林省2006年—2011年的Landsat 5 TM地表反射率数据以及500 m的MOD09A1反射率产品来生成3个时相的Landsat 5 TM反射率合成数据,从而获得研究区在上述时相下地表反射率数据的镶嵌图。初步分析表明,所生成的Landsat 5 TM反射率数据的光谱分布特征与MOD09A1反射率数据较为一致,且图像在整体上光谱特征的连续性较好。  相似文献   

3.
In the present study, The Landsat 7 ETM satellite data was collected for the Sittampundi anorthosites complex and digital image analysis was carried out. The anorthositic rocks available at Sittampundi complex is considered as an equivalent of lunar highland rocks. Hence, a remote sensing study comprises of image analysis and spectral profile analysis was carried out. The satellite data was digitally processed and generated various outputs like band combinations, color composites, stretched outputs, and PCA. The suitable processed outputs were identified for delineating the anorthosite complex. The diagnostic absorption features of reflectance spectra are the sensitive indicators of mineralogy and chemical composition of rocks, which are interest to the planetary scientists. The spectral profile of Landsat ETM plotted for pure and mixed anorthosite pixels and compared with the field and lab reflectance spectra. The percentages of image spectra vary from 30% to 60% for Sittampundi anorthosite. The spectral bands 2, 4 and 6 have low reflectance and bands 3 and 5 have high reflectance. The spectral range of bands 2,3,4,5 and 6 are 525 nm–605 nm, 630 nm–690 nm, 750 nm–900 nm, 1550 nm–1750 nm and 10400 nm–12500 nm respectively. The field spectral curve has weak absorptions at 650 nm and 1000 nm due to the iron transition absorption and low ca- pyroxene respectively available in the anorthosite, matching with the image spectra. However, hyperspectal image with narrow bandwidth could be more useful in selecting the suitable spectrum for remotely mapping the anorthosite region, as equivalent test site for lunar highland region.  相似文献   

4.
In the present study an attempt has been made to estimate acreage and condition of tea plantations by using satellite based digital remotely sensed data in visible, near infra-red and middle infra-red spectral regions, in the Nilgiri district of Tamilnadu state. Landsat MSS and TM data, acquired on Dec. 26, 1990 were used in the analysis, Different spectral band combinations, Landsat MSS (1234), TM (1234), TM (2345) and TM (123457) were used for identification of tea plantations. District-boundary-overlaying approach with complete enumeration of digital data was used for estimation of tea acreages. Condition assessment of tea plantations is based on the Greenness Index. Use of Landsat MSS data resulted in an underestimation of area under tea whereas the acreages estimated by using TM spectral band combinations 1234 and 2345 compared closely with the estimates of Department of Horticulture (DOH). The distribution pattern of various condition classes of tea plantations compared well with the prevailing ground conditions as observed during post-classification field survey in September 1992 in the district.  相似文献   

5.
Mapping burns and natural reforestation using thematic Mapper data   总被引:2,自引:0,他引:2  
Remote sensing techniques are specially suitable to detect and to map areas affected by forest fires. In this work, Landsat 5 Thematic Mapper (TM) data has been used to study a number of forest fires that occurred in the province of Valencia (Spain) and to monitor the vegetation regeneration over burnt areas.

A reference area (non‐burnt forest) was established to assess the change produced by fire. The radiance in the thermal band (10.4–12.5 μm) and the normalized difference in reflectance between near 1R (0.76–0.90 μm) and middle IR (2.08–2.35 μm) were the most suitable parameters to map burnt areas. This index can also be used for monitoring vegetation regeneration in burnt areas. About a month after the fire, the burns show temperatures of 5–6 °C higher than those found in the reference area, and the vegetation index shows negative values whereas the reference area values remain positive. The differences between the burns and the reference area for the vegetation index decrease with time as vegetation regenerates.  相似文献   

6.
通过测量图像端元的地表反射率,对遥感图像进行精确大气校正;在对混合像元分解模型进行改进的基础上,建立了基于地表反射率的线性混合像元分解( Liner Spectral Unmixing,LSU)模型,有效地避免了因大气时间、空间差异所造成的多时相误差,实现了多时相对比;通过增加土壤湿度因子,消除了土壤湿度差异造成的误差...  相似文献   

7.
黄河口水体光谱特性及悬沙浓度遥感估测   总被引:10,自引:1,他引:10  
通过黄河口含沙水体野外遥感光谱反射率的观测实验,探讨了黄河口水体表观光谱特性,分析了悬浮体中有机颗粒含量和悬沙粒度对光谱特性的影响。针对Landsat TM/ETM^+影像波段特性,对黄河口含沙水体在其可见光至近红外4个波段的光谱特性进行了模拟分析,并结合表观光谱观测数据建立了经验回归函数,以估测不同时相黄河口水体表层悬沙的浓度。  相似文献   

8.
Mapping the surficial extent of oolitic iron ore deposits hosted in the Oligo–Miocene sedimentary rocks of the Ashumaysi Formation, western Saudi Arabia, was carried out using Landsat 7 Enhanced Thematic Mapper Plus (ETM+) data. Ore samples were collected from four various locations in the study area, and were studied in the laboratory using the GER 3700 Spectroradiometer (0.4–2.5 µm) and X-ray diffraction (XRD). Principal component analysis (PCA), minimum noise fraction (MNF), and minimum distance classification were used and assessed to map mineralization zones in the study area. Good correspondences were observed between the results obtained from the above mentioned techniques, spectral reflectance analyses, and XRD. The confusion matrix results revealed that mapping of iron ores using MNF is better and more accurate than using PCA. Good matching was also observed between the spectral reflectance curves of the collected samples and the corresponding pixels from Landsat 7 ETM+. The results demonstrated the usefulness of the image processing and interpretation of Landsat 7 ETM+ data for the detection and delineation iron ore deposits in arid and semi-arid areas.  相似文献   

9.
基于TM影像的城市建筑用地信息提取方法研究   总被引:2,自引:0,他引:2  
本文选用金华市Landsat TM影像为研究的数据源,在归一化裸露指数基础上,利用归一化植被指数提取出非植被信息,通过图像二值化、叠加分析以及掩膜处理去除了低密度植被覆盖区域的噪音信息,自动提取了金华城市建筑用地信息。研究结果表明,归一化裸露指数和归一化植被指数相结合的方法弥补了单一利用归一化裸露指数来提取城市建筑用地信息的不足,提高了提取精度,而且结果客观可信,是一种不经人为干预的、快速有效的提取城市建筑用地方法。  相似文献   

10.
HJ-1A CCD与TM数据及其估算草地LAI和鲜生物量效果比较分析   总被引:2,自引:1,他引:1  
基于地面实测和PROSAIL模型模拟数据,研究了新型传感器HJ-1ACCD与TM数据一致性问题,分析了传感器天顶角和光谱相应函数差异的影响,对比两种传感器数据估算草地LAI和鲜生物量的效果,得出以下结论:(1)HJ-1ACCD和TM反射率数据的拟合系数R2在0.7322和0.9205左右,在反射率较小时,两种传感器数据一致性较好;随着反射率增大,HJ-1ACCD数值逐渐高于TM。总体而言,在可见光和近红外波段,两种传感器较为接近,其中红波段最接近。(2)两种传感器的NDVI数据一致性非常高,且受传感器天顶角和光谱响应函数影响作用较小(相对误差约为0.34%—0.53%),而反射率的相对差别在3.34%—9.54%。(3)传感器天顶角较光谱响应函数对反射率影响更大。(4)基于HJ-1ACCD反射率数据估算草地LAI和鲜生物量效果较好,其中以CCD2传感器估算效果最好。  相似文献   

11.
徐涵秋 《遥感学报》2016,20(2):229-235
Landsat系列卫星上的TIRS热红外传感器数据已被大量应用,针对TIRS数据的地表温度反演也相继开发出一些算法,并有一些研究对TIRS数据的定标及其地表温度反演算法的精度进行了对比。本文主要就TIRS热红外传感器定标参数的变化,结合这些定标参数变化的时间点对有关地表温度反演算法的适用性和有效性进行分析,特别是对劈窗算法是否适合当前的TIRS数据进行了讨论,以使用户能够对Landsat 8 TIRS热红外数据的正确使用有进一步的认识。总的看来,由于视域外杂散光的影响,TIRS数据的定标精度仍达不到设计目标,TIRS第11波段的不确定性仍成倍大于TIRS 10波段。因此,在Landsat团队未彻底解决这一问题之前,同时用TIRS第10、第11这两个差距较大的波段构成的劈窗算法来反演地表温度,其精度存在较大的不确定性,US6-S团队仍在致力于改进第11波段的精度,改进后的波段可以用劈窗策法。目前应以TIRS第10单波段的方式来反演地表温度为宜。  相似文献   

12.
Suspended sediment yield is a very important environmental indicator within Amazonian fluvial systems, especially for rivers dominated by inorganic particles, referred to as white water rivers. For vast portions of Amazonian rivers, suspended sediment concentration (SSC) is measured infrequently or not at all. However, remote sensing techniques have been used to estimate water quality parameters worldwide, from which data for suspended matter is the most successfully retrieved. This paper presents empirical models for SSC retrieval in Amazonian white water rivers using reflectance data derived from Landsat 5/TM. The models use multiple regression for both the entire dataset (global model, N = 504) and for five segmented datasets (regional models) defined by general geological features of drainage basins. The models use VNIR bands, band ratios, and the SWIR band 5 as input. For the global model, the adjusted R2 is 0.76, while the adjusted R2 values for regional models vary from 0.77 to 0.89, all significant (p-value < 0.0001). The regional models are subject to the leave-one-out cross validation technique, which presents robust results. The findings show that both the average error of estimation and the standard deviation increase as the SSC range increases. Regional models were more accurate when compared with the global model, suggesting changes in optical proprieties of water sampled at different sampling stations. Results confirm the potential for the estimation of SSC from Landsat/TM historical series data for the 1980s and 1990s, for which the in situ database is scarce. Such estimates supplement the SSC temporal series, providing a more comprehensive SSC temporal series which may show environmental dynamics yet unknown.  相似文献   

13.
Landsat TM遥感影像中厚云和阴影去除   总被引:5,自引:1,他引:4  
提出了一种新的利用多时相Landsat TM影像数据进行的厚云及其阴影去除的方法。该方法通过分析厚云及其阴影的光谱特征, 设计了厚云和云阴影识别模型。该算法的实现是采用图像配准技术、非监督分类、像元替换等运算, 计算出厚云和云阴影区域的TM影像替换数据, 进而得到消除或者减少云影响的TM遥感影像。试验结果表明本文提出的厚云及其阴影去除方法效果很好, 能消除或者弱化云对TM影像数据的影响。  相似文献   

14.
A field experiment was conducted on wheat crop during rabi seasons of 1995–96, 1996–97 and 1997–98 to study the spectral response of wheat crop (between 490 to 1080 nm) under water and nutrient stress condition. An indigenously developed ground truth radiometer having narrow band in visible and near infrared region (490 – 1080 nm) was used. Vegetation indices derived using different band combinations and related to crop growth parameters. The near infrared spectral region of 710 – 1025 nm was found most important for monitoring stress condition. Relationship has been developed between crop growth parameters and vegetation indices. Leaf Area Index (LAI) and chlorophyll could be predicted by knowing different reflectance ratios at milking stage of crop with R2 value of 0.78 and 0.89, respectively. Dry biomass (DBM), Plant Water Content (PWC) and grain yield are also significantly related with reflectance ratios at flowering stage of crop with R2 value of 0.90, 0.98 and 0.74, respectively.  相似文献   

15.
1991—2014年中亚伊塞克湖湖泊面积变化遥感监测   总被引:1,自引:0,他引:1  
基于中亚伊塞克湖地区的1991—1998年Landsat-5/TM、1999—2012年Landsat-7/ETM+以及2013—2014年Landsat-8/OLI等遥感影像为主要基础数据,通过采用波段比值法(TM3/TM5)自动提取湖泊边界,并加以人工修订,得出了伊塞克湖1991—2014年多期次的湖泊边界及对应的湖泊面积变化过程.结果显示,伊塞克湖的湖泊面积在1991—1998年间总体减小5.3 km2,而在1998—2014年间总体增大7.3 km2.通过与中亚地区Tian Shan气象站记录的气象数据对比发现,伊塞克湖水域面积的变化与气温和降水具有显著的正相关关系,这说明过去20年以来中亚地区气候的暖湿化对伊塞克湖流域具有重大影响.  相似文献   

16.
Surface fires are common in coalfields where coal is mined or exposed to sunlight for long durations of time. The heat energy emitted from these fires affects the signal recorded by sensors operating in the shortwave infrared regions of the electromagnetic spectrum. The Landsat TM/ETM+ band-7 is sensitive to solar reflected radiation as well as emitted radiation from a target. The ‘maximum solar reflection threshold’ method proposed in this study uses the highest spectral radiance that can be attributed to solar reflection as the conservative threshold to segregate the pixels with emitted component from those with reflected component of the EM energy. Investigations with Landsat TM/ETM+ data indicate a reflectance value of 0.23–0.25 as the most representative highest reflectance (threshold) in coal mining areas. The method apparently has the advantage that it is based on the reflectance characteristics of materials (sandstone-shale mixtures) typically found in coal mining areas.  相似文献   

17.
江苏近海岸水深遥感研究   总被引:8,自引:0,他引:8  
以江苏近海辐射沙脊群海域为典型研究区,通过实测水深数据和水体光谱测量与分析,发现对应TM3和TM4波段的水体光谱反射率对水深信息敏感,线性相关系数分别达到-0.561和-0.694。结合多光谱遥感信息传输方程所推导出的水深信息对数反演模式,针对本研究区TM4和TM3波段数据所建立的水深预测模式的复相关系数R2为0.4793,对0-15m水深,预测水深和实测水深之间拟合较好。利用TM5波段反射率、出露沙洲反射率以及海水反射率的差异,通过建立掩膜图像,可较有效地对TM遥感图像进行水陆分离,提取TM图像中海水部分,进一步可通过常用的图像处理软件绘制每隔5m的TM水深遥感制图、等深线图。随着高空间、高光谱、高辐射分辨率遥感技术的发展,对浅海水域的水深和水下地形进行遥感探测的技术方法和应用将会不断地深入开展。  相似文献   

18.
For a satellite sensor with only one or two thermal infrared channels, it is difficult to retrieve the surface emissivity from the received emissive signal. Empirical linear relationship between surface emissivity and red reflectance are already established for deriving emissivity, but the inner physical mechanism remains unclear. The optical constants of various minerals that cover the spectral range from 0.44 to 13.5 μm in conjunction with modern radiative transfer models were used to produce corresponding surface reflectance and emissivity spectra. Compared to the commonly used empirical linear relationship, a more accurate multiple linear relationship between Landsat TM5 emissivity and optical reflectances was derived using the simulated data, which indicated the necessity of replacing the empirical relationship with the new one for improving surface emissivity estimate in the single channel algorithm. The significant multiple linear relationship between broadband emissivity (BBE, 8–13.5 μm) and MODIS spectral albedos was also derived using the same data. This paper demonstrates that there is a physical linkage between surface emissive and reflective variables, and provides a theoretical perspective on estimating surface emissivity for sensors with only one or two thermal infrared channels.  相似文献   

19.
北京地区Landsat 8 OLI高空间分辨率气溶胶光学厚度反演   总被引:3,自引:0,他引:3  
卫星气溶胶光学厚度(AOD)反演中,传统暗目标方法在反射率较低的水体、浓密植被覆盖区域取得了较好效果,在反射率较高且结构复杂的高反射地表上空目前多采用深蓝算法,但存在空间分辨率较低,对细节分布描述性较差等问题。为解决这一问题,本文首先以5年(2008年—2012年)长时间序列MODIS地表反射率产品为基础,采用最小值合成法建立500 m分辨率逐月地表反射率产品数据集,然后利用地物波谱库中典型地物波谱数据,分析建立MODIS与Landsat 8 OLI传感器蓝光波段反射率转换模型,最后北京地区AERONET地基观测数据确定了气溶胶光学物理参数,并反演获取了北京地区上空500 m分辨率的AOD分布。为验证反演算法的精度,分别将反演结果同AERONET及MODIS/Terra气溶胶产品(MOD04)进行交叉对比,同时利用相关系数R,均方根误差RMSE,平均绝对误差MAE以及MODIS AOD产品预期误差EE共4个指标进行衡量。结果表明:算法反演获取的AOD与AERONET观测值具有较高的一致性,各指标分别为R=0.963,RMSE=0.156,MAE=0.097,EE=85.3%,稍优于MOD04产品(R=0.962,RMSE=0.158,MAE=0.101,EE=75.8%),并且有效的对比点数也高于MOD04。通过与地基观测相比,卫星遥感获取的高分辨率城市地区AOD精度可作为定量评估城市空气质量的有效依据。  相似文献   

20.
Bamboo-dominated forests are unusual and interesting because their structure and biomass fluctuate in decades-long cycles corresponding to the flowering and mortality rhythm of the bamboo. In southwestern Amazonia, these forests have been estimated to occupy an area of approximately 160 000 km2, and a single reproductively synchronized patch can cover up to thousands of square kilometers. Accurate mapping of these forests is challenging, however: the forests are spatially heterogeneous, with bamboo densities varying widely among adjacent sites; much of the area is inaccessible, so field verification of bamboo presence is difficult to obtain and georeferenced records of past flowering events virtually non-existent; and detectability of the bamboo by remote sensing varies considerably during its life cycle. In this study, we develop a supervised time series segmentation approach that allows us to identify both the presence of bamboo forests and the years in which the bamboo flowering and subsequent mortality have occurred. We then apply the method to the entire Landsat TM/ETM+ archive from 1984 to the end of 2018 and validate the classification by visual interpretation of very high resolution imagery. Collecting accurate ground reference data of bamboo presence and bamboo mortality timing is notably difficult in these forests, and we therefore developed a methodology that takes advantage of imperfect reference data obtained from the Landsat time series itself. Our results show that bamboo forests can be differentiated from non-bamboo forests using any of the infrared bands, but band 5 produces the highest classification accuracy. Interestingly, there appears to be a temporal difference in the spectral responses of the three infrared bands to bamboo flowering and mortality: near infrared (band 4) reflectance reacts to the event earlier than shortwave infrared (bands 5 and 7) reflectance. The long Landsat TM/ETM+ archive allows our methodology to detect some areas with two mortality events, with a theoretical maximum interval of 29 years. Analysis of these pixels with repeated mortality confirms that the life cycles of the local bamboo species (Guadua sarcocarpa and G. weberbauerii) last typically 28 years.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号