首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The seismic response of a dam is strongly influenced by its interaction with the water reservoir and the foundation. The hydrodynamic forces in the reservoir are in turn affected by radiation of waves towards infinity, wave absorption at the reservoir bottom, and cross-coupling between the foundation below the dam and the reservoir bottom. The fluid–foundation interaction effect, i.e. the wave absorption along the reservoir bottom, can be accounted for by using either an approximate one-dimensional (1D) wave propagation model or a rigorous analysis of interaction between the flexible soil along the base and the water. The rigorous approach requires enormous computational effort because of (a) cross-coupling between the foundation of the dam and the soil below the reservoir and (b) frequency dependence of the boundary condition along the fluid-foundation interface. The analysis can be simplified by ignoring the cross-coupling and by using the approximate 1D wave propagation model. The effects of each of these two simplifications on the accuracy and computational efficiency of the procedure used for the seismic response analysis of a dam are examined. Analytical results are presented for the complex frequency-response functions as well as the time histories of the response of Pine Flat dam to Taft and E1 Centro ground motions.  相似文献   

2.
A direct finite element method is presented for nonlinear earthquake analysis of interacting dam–water–foundation rock systems. The analysis procedure applies viscous damper absorbing boundaries to truncate the semi‐unbounded fluid and foundation‐rock domains and specifies at these boundaries effective earthquake forces determined from the design ground motion defined at a control point on the free surface. The analysis procedure is validated numerically by computing the frequency response functions and transient response of an idealized dam–water–foundation rock system and comparing with results from the substructure method. Because the analysis procedure is applicable to nonlinear systems, it allows for modeling of concrete cracking, as well as sliding and separation at construction joints, lift joints, and at concrete–rock interfaces. Implementation of the procedure is facilitated by commercial finite element software with nonlinear material models that permit modeling of viscous damper boundaries and specification of effective earthquake forces at these boundaries. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

3.
A nonlinear finite element model for earthquake response analysis of arch dam–water–foundation rock systems is proposed in this paper. The model includes dynamic dam–water and dam–foundation rock interactions, the opening of contraction joints, the radiation damping of semi‐unbounded foundation rock, the compressibility of impounded water, and the upstream energy propagating along the semi‐unbounded reservoir. Meanwhile, a new equivalent force scheme is suggested to achieve free‐field input in the model. The effects of the earthquake input mechanism, joint opening, water compressibility, and radiation damping on the earthquake response of the Ertan arch dam (240 m high) in China are investigated using the proposed model. The results show that these factors significantly affect the earthquake response of the Ertan arch dam. Such factors should therefore be considered in the earthquake response analysis and earthquake safety evaluation of high arch dams. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

4.
A direct finite element method for nonlinear earthquake analysis of 2‐dimensional dam–water–foundation rock systems has recently been presented. The analysis procedure uses standard viscous‐damper absorbing boundaries to model the semi‐unbounded foundation‐rock and fluid domains and specifies the seismic input as effective earthquake forces at these boundaries. Presented in this paper is a generalization of the direct finite element method with viscous‐damper boundaries to 3‐dimensional dam–water–foundation rock systems. Step‐by‐step procedures for determining the effective earthquake forces starting from a ground motion specified at a control point on the foundation‐rock surface is developed, and several numerical examples are computed and compared with independent benchmark solutions to demonstrate the effectiveness of the analysis procedure for modeling 3‐dimensional systems.  相似文献   

5.
The seismic response of the intake–outlet towers has been widely analyzed in recent years. The usual models consider the hydrodynamic effects produced by the surrounding water and the interior water, characterizing the dynamic response of the tower–water–foundation–soil system. As a result of these works, simplified added mass models have been developed. However, in all previous models, the surrounding water is assumed to be of uniform depth and to have infinite extension. Consequently, the considered added mass is associated with only the pressures created by the displacements of the tower itself. For a real system, the intake tower is usually located in proximity to the dam and the dam pressures may influence the equivalent added mass. The objective of this paper is to investigate how the response of the tower is affected by the presence of the dam. A coupled three‐dimensional boundary element‐finite element model in the frequency domain is employed to analyze the tower–dam–reservoir interaction problem. In all cases, the system response is assumed to be linear, and the effect of the internal fluid and the soil–structure interaction effects are not considered. The results suggest that unexpected resonance amplifications can occur due to changes in the added mass for the tower as a result of the tower–dam–reservoir interaction. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

6.
  相似文献   

7.
The available substructure method and computer program for earthquake response analysis of arch dams, including the effects of dam–water–foundation rock interaction and recognizing the semi‐unbounded size of the foundation rock and fluid domains, are extended to consider spatial variations in ground motions around the canyon. The response of Mauvoisin Dam in Switzerland to spatially varying ground motion recorded during a small earthquake is analyzed to illustrate the results from this analysis procedure. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

8.
The need for full‐scale dynamic tests, which are recognized as the most reliable method to evaluate a structure's vibration properties, is increasing as new analysis techniques are developed that take into account the complex interaction phenomenons that occur in dam–reservoir–foundation systems. They are extremely useful to obtain reliable data for the calibration of newly developed numerical methods. The Earthquake Engineering and Structural Dynamics Research Center (CRGP) at the University of Sherbrooke has been developing and applying dynamic testing methods for large structures in the past 10 years. This paper presents the experimental evaluation of the effects of the varying water level on the dynamic response of the 180 m Emosson arch dam in Switzerland. Repeated forced‐vibration tests were carried out on the dam during four different periods of the reservoir's filling cycle during a one‐year span. Acceleration and hydrodynamic pressure frequency responses were obtained at several locations while the dam was subjected to horizontal harmonic loading. The variation of the resonant frequencies as a function of the reservoir level is investigated. A summary of the ongoing numerical correlation phase with a three‐dimensional finite element model for the dam–reservoir–foundation system is also presented. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

9.
This paper presents a method for coupled arch dam–foundation–reservoir seismic behaviour analysis. The dam is discretized by finite elements (FE) and the foundation and reservoir are discretized by boundary elements (BE). The opening of contraction joints and the spatial variability of the seismic action is taken into account. The study of Pacoima dam by this method is also presented. The computed results show that no cracks were to be expected due to the vibrations induced during the Feb. 9, 1971 San Fernando earthquake. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

10.
A finite element procedure to model the non-linear earthquake response of concrete gravity dam systems is presented. A two-dimensional idealization is adopted for the dam and water in order to simplify the analysis and reduce the computational effort. The foundation of the dam is modelled as a rigid rectangular massless plate attached to a three-dimensional viscoelastic half-space. The non-linear behaviour is represented by smearing techniques and includes tensile cracking with subsequent opening, closing and sliding, as well as water cavitation in the reservoir. Special treatments are applied to suppress spurious oscillations in the water response associated with cavitation and to prevent cracks in the dam from spreading into wide zones. Experience from non-linear analyses is cited as it affects the design of the algorithm.  相似文献   

11.
A general, rigorous, coupled Boundary Element–Finite Element (BE–FE) formulation is presented for non-linear seismic soil–structure interaction in two dimensions. The BE–FE method is applied to investigate the inelastic response of earth dams to transient SV waves. The dam body, consisting of heterogeneous materials modelled with a simple non-linear hysteretic model, is discretized with finite elements, whereas the elastic half-space is discretized with boundary elements. The study focuses on the combined effects of the material non-linearity and foundation flexibility. The results show the significant effect of the foundation flexibility in reducing the response through radiation of energy. For excitations with peak ground accelerations from 0·2gto 0·6g, the crest acceleration amplification ranges from 2·5 to 1·4 and seems to be comparable with field observations and results from other studies. Deamplification increasing with strain is reported at the lower part of the dam. The method is computationally powerful and can be used for efficient non-linear analysis of complex soil–structure systems. The efficiency of the BE–FE method allows further improvements with incorporation of a more advanced constitutive model and consideration of the generation and dissipation of pore-water pressures during the earthquake. © 1998 John Wiley & Sons, Ltd.  相似文献   

12.
A procedure which involves a non‐linear eigenvalue problem and is based on the substructure method is proposed for the free‐vibration analysis of a soil–structure system. In this procedure, the structure is modelled by the standard finite element method, while the unbounded soil is modelled by the scaled boundary finite element method. The fundamental frequency, and the corresponding radiation damping ratio as well as the modal shape are obtained by using inverse iteration. The free vibration of a dam–foundation system, a hemispherical cavity and a hemispherical deposit are analysed in detail. The numerical results are compared with available results and are also verified by the Fourier transform of the impulsive response calculated in the time domain by the three‐dimensional soil–structure–wave interaction analysis procedure proposed in our previous paper. The fundamental frequency obtained by the present procedure is very close to that obtained by Touhei and Ohmachi, but the damping ratio and the imaginary part of modal shape are significantly different due to the different definition of damping ratio. This study shows that although the classical mode‐superposition method is not applicable to a soil–structure system due to the frequency dependence of the radiation damping, it is still of interest in earthquake engineering to evaluate the fundamental frequency and the corresponding radiation damping ratio of the soil–structure system. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

13.
An extensive forced‐vibration testing programme has been carried out on an 84‐m concrete gravity dam located in northeastern Québec, Canada. The dam was subjected to a harmonic load on the crest in summer and severe winter conditions with temperatures ranging from ?10°C to ?15°C and a 1.0–1.5m ice cover. Acceleration and hydrodynamic frequency responses were obtained in different locations on the dam and in the reservoir. The main objective of the repeated tests was to investigate the effects of the ice cover on the dynamic behaviour of the dam–reservoir–foundation system, by comparing summer and winter results. Modifications in damping and resonance frequencies were observed, as well as an additional resonance that was attributed to an interaction of the dam with the ice cover. These findings provided a reliable and unique database for the investigations of dam–reservoir–foundation interaction and, in particular, the ice‐cover effects for dams located in northern regions. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

14.
A procedure is presented to analyse the response of concrete gravity dams due to horizontal and vertical earthquake ground motion components considering dam-water interaction and partial absorption of hydrodynamic pressure waves at the reservoir bottom into the foundation medium. The effects of reservoir bottom absorption on the hydrodynamic force on a rigid dam are examined first. The harmonic response of an idealized dam cross-section is presented for a wide range of parameters characterizing the properties of the dam, the impounded water and the foundation medium. Based on these frequency response functions the effects of dam-water interaction and of reservoir bottom absorption in the response of dams due to horizontal and vertical components of ground motion are investigated.  相似文献   

15.
A general procedure for analysis of the response of gravity dams, including hydrodynamic interaction and compressibility of water, to the transverse horizontal and vertical components of earthquake ground motion is presented. The problem is reduced to one in two dimensions considering the transverse vibration of a monolith of a dam, and the material behaviour is assumed to be linearly elastic The complete system is considered as composed of two substructures—the dam, represented as a finite element system, and the reservoir, as a continuum of infinite length in the upstream direction governed by the wave equation. The structural displacements of the dam (including effects of water) are expressed as a linear combination of the modes of vibration of the dam with the reservoir empty. The effectiveness of this analytical formulation lies in its being able to produce excellent results by considering only the first few modes. The complex frequency response for the modal displacements are obtained first. The responses to arbitrary ground motion are subsequently obtained with the aid of the Fast Fourier Transform algorithm An example analysis is presented to illustrate results obtained from this method. It is concluded that the method is very effective and efficient and is capable of producing results to any desired degree of accuracy by including the necessary number of modes of vibration of the dam.  相似文献   

16.
A modal analysis procedure based on an FE–BE method in the time domain is first formulated and then applied to a dam–foundation system. In the application, horizontal and vertical impulsive responses are calculated for the system having six different impedance ratios. Modal characteristics such as natural frequencies, damping ratios and mode shapes are evaluated from the Fourier spectra of the responses. The proposed procedure allows analysis of not only the underdamped but also the overdamped modes. According to the analysis, the radiation damping pertinent to the vertical vibration is half of that pertinent to the horizontal vibration and the interaction effect on the modes is not negligibly small when the impedance ratio exceeds 0·3.  相似文献   

17.
An analysis procedure in the frequency domain is developed for determining the earthquake response of two-dimensional concrete gravity and embankment dams including hydrodynamic effects; responses of the elastic dams and compressible water are assumed linear. The dam and fluid domain are treated as substructures and modelled with finite elements. The only geometric restriction is that an infinite fluid domain must maintain a constant depth beyond some point in the upstream direction. For such an infinite uniform region, a finite element discretization over the depth is combined with a continuum representation in the upstream direction. The fluid domain model approximately accounts for interaction between the fluid and underlying foundation medium through a damping boundary condition applied along the reservoir bottom, while the dam foundation is assumed rigid. Several examples are presented to demonstrate the accuracy of the fluid domain model and to illustrate dam responses obtained from the analysis procedure.  相似文献   

18.
The arch dam–foundation rock dynamic interaction and the nonlinear opening and closing effects of contact joints on arch dam are important to the seismic response analysis of arch dams. Up to date, there is not yet a reasonable and rigorous procedure including the two factors in seismic response analysis. The methods for the analysis of arch dam–foundation rock dynamic interaction in frequency domain are not suitable to the problem with nonlinear behaviors, in this paper, so an analysis method in time domain is proposed by combining the explicit finite element method and the transmitting boundary, and the dynamic relaxation technique is adopted to obtain the initial static response for dynamic analysis. Moreover, the influence of arch dam–foundation dynamic interaction with energy dispersion on seismic response of designed Xiaowan arch dam in China is studied by comparing the results of the proposed method and the conventional method with the massless foundation, and the local material nonlinear and nonhomogeneous behaviors of foundation rock are also considered. The reservoir water effect is assumed as Westergaard added mass model in calculation. The influence of the closing–opening effects of contact joints of arch dam on the seismic response will be studied in another paper.  相似文献   

19.
The dynamics of a coupled concrete gravity dam-intake tower–reservoir water–foundation rock system is numerically studied considering two hollow slender towers submerged in reservoir of gravity dam. The system is investigated in the frequency-domain using frequency response functions of the dam and the towers, and in the time-domain using time-history seismic analysis under a real earthquake ground motion. The analyzes are separately conducted under horizontal and vertical ground motions. The coupled system is three-dimensionally modeled using finite elements by Eulerian–Lagrangian approach. It is shown that presence of the dam significantly influences the dynamic response of the towers under both horizontal and vertical excitations; however the dam is not affected by the towers. When the dam is present in the model, the water contained inside the towers has different effects if the foundation is rigid, but it alleviates the towers motion if the foundation is flexible. It is concluded that the effects of foundation interaction are of much importance in the response of tall slender towers when they are located near concrete gravity dams.  相似文献   

20.
In this paper, a study on the transient response of an elastic structure embedded in a homogeneous, isotropic and linearly elastic half-plane is presented. Transient dynamic and seismic forces are considered in the analysis. The numerical method employed is the coupled Finite-Element–Boundary-Element technique (FE–BE). The finite element method (FEM) is used for discretization of the near field and the boundary element method (BEM) is employed to model the semi-infinite far field. These two methods are coupled through equilibrium and compatibility conditions at the soil–structure interface. Effects of non-zero initial conditions due to the pre-dynamic loads and/or self-weight of the structure are included in the transient boundary element formulation. Hence, it is possible to analyse practical cases (such as dam–foundation systems) involving initial conditions due to the pre-seismic loads such as water pressure and self-weight of the dam. As an application of the proposed formulation, a gravity dam has been analysed and the results for different foundation stiffness are presented. The results of the analysis indicate the importance of including the foundation stiffness and thus the dam–foundation interaction.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号