共查询到20条相似文献，搜索用时 119 毫秒
1.
以日本KiK-net强震观测台网中硬场地井下记录为样本,对传统等效线性化方法LSSRLI-1（频域）、SHAKE2000,时域非线性方法DEEPSOIL和频域一致等效线性化方法SOILQUAKE等几种计算程序在硬土场地地震反应分析中的可靠性进行对比检验。检验工况包括KiK-net井下台网中地表峰值加速度不小于0.05g的水平硬场地的总计344台次的加速度记录,涉及5个台站,土层厚度6~50m,地表峰值加速度范围0.050~0.805g。结果表明:认为硬土场地以往计算方法能够体现土层放大的认识是片面的,在中强地震动情况下,现有流行方法计算出的地表响应会偏小,强地震动下会严重偏小,会给工程抗震设计提供偏于危险的输入;硬场地中烈度8度以下（地表PGA在0.19g以下）,SHAKE2000和DEEPSOIL、LSSRLI-1（频域）计算结果与实际记录差距可以接受,但烈度8度以上,计算出地表响应均较实际记录明显偏小,且随地震动强度增加差距急剧增大;硬场地中,无论何种烈度,SOILQUAKE16计算的地表加速度响应与实测相当,可体现出土层放大作用。 相似文献
2.
The 310 m Nanjing TV transmission tower in China will be installed with an active mass driver on the upper observation deck in order to reduce the acceleration responses under strong wind gusts. This paper presents the linear–quadratic–Gaussian (LQG) control strategy using acceleration feedback to reduce the tower responses under coupled lateral–torsional motion. Emphasis is placed on the practical applications, such as the limitations on actuator peak force and stroke, limited number of sensors, etc. The along‐ and across‐wind components of the wind velocity are defined by the cross‐power spectra. In the simulation analysis, both deterministic and stochastic approaches have been used, and the power spectral density, rms values and peak values of response quantities have been computed. Comparisons of the responses of the TV tower due to wind loads from different angles of attack have been made. Simulation results demonstrate that (i) the performance of the active mass driver using the LQG control strategy is remarkable in reducing coupled lateral‐torsional motions of the tower, and (ii) the LQG strategy is robust with respect to uncertainties in the angle of attack of wind loads. The LQG strategy is suitable for the full‐scale implementation of active mass driver on Nanjing Tower. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
3.
Equivalent linear method considering frequency dependent characteristics of stiffness and damping 总被引：4，自引：0，他引：4
Nozomu Yoshida Satoshi Kobayashi Iwao Suetomi Kinya Miura 《Soil Dynamics and Earthquake Engineering》2002,22(3)
Equivalent linear dynamic response analysis of ground is based on complex moduli and Fourier series expansion; therefore, it is not an equivalent method but an approximate method. Two deficiencies in the conventional equivalent linear method represented by SHAKE are described first. The maximum shear strength is overestimated, resulting in overestimation of the peak acceleration under a strong ground motion, and the amplification is underestimated at high frequency. The latter sometimes results in underestimation of the peak acceleration under weak ground shaking, and gives an incident wave with unrealistic large accelerations or a divergence of analysis in deconvolution analysis under strong ground motion. Both deficiencies are shown to come from the same cause, i.e. computing the effective strain as a constant fraction of the maximum strain. Since this is a key concept of the equivalent linear analysis, one cannot overcome both deficiencies at the same time in the conventional method. An apparent frequency dependence in stiffness and damping is shown to appear in the dynamic response, although soil itself does not show frequency dependent characteristics. Following this observation, the effective strain is expressed in terms of frequency from the similarity concept of the strain–frequency relationship between time domain and frequency domain. This enables the reduction of both deficiencies at the same time, resulting in a marked improvement in the equivalent linear analysis. The accuracy of the proposed method is examined by the simulations of three vertical array records during large earthquakes. The proposed method always gives much better prediction than conventional equivalent linear methods for both convolution and deconvolution analyses, and it is confirmed to be applicable at more than 1% shear strain. 相似文献
4.
Band-limited, non-stationary random vibrations of a shear beam are studied in order to investigate high frequency seismic effects on building structures. A solution for the evolutionary spectral density of the shear beam response to a time segment of band-limited white noise is given in a closed form. The root mean square (rms) and peak response of the shear beam are studied for two characteristic frequency bands: the conventional 1–4 Hz and higher frequency 4–16 Hz, characteristic for rockburst ground motion. Applying the criterion of equal excitation intensity with constant rms velocity, both responses are analyzed in detail and compared. The “switching off” fundamental mode for high frequency excitations results in characteristic overshoot of the stationary response level by the non-stationary rms response and an amplification of the response in the upper part of the shear beam. 相似文献
5.
强震观测建筑结构的地震反应分析 总被引：5，自引：0，他引：5
选择取得强震观测资料的建筑结构为研究对象，采用有限元法建立结构的动力反应分析模型，利用SAP2000程序分析了结构的地震反应，并同实际记录到的结构地震反应进行了对比分析，讨论了结构模型参数估计和一些不确定因素对模型精度的影响。 相似文献
6.
The time–frequency and the time‐scale analysis methods are used in this paper to identify the dynamic characteristics of non‐linear seismic response of structural systems with single degree of freedom (SDOF) and multiple degrees of freedom (MDOF). Based on the floor acceleration response time histories of bi‐linear SDOF and MDOF structures, the current study compares the results of system identification using the short‐time Fourier transform (STFT), continuous wavelet transform (CWT) and discrete wavelet transform (DWT) methods. The aim is to identify the frequency variations and the time at on‐set of yielding and unloading of a bi‐linear structural system during seismic response. The results demonstrate that the CWT method is better than the STFT method in both time and frequency resolutions, and that the DWT method is the best at detecting the time at on‐set of yielding and unloading. Combining the results of CWT and DWT methods therefore provides accurate information of both frequency variations and yielding time in non‐linear seismic response. To alleviate the problems associated with noise‐contaminated signals, e.g. seismic response data recorded on site, the study suggests that low‐pass filtering be carried out before applying the DWT method to decompose the signals into multiple levels of details. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
7.
This paper explores the influence of linear hysteretic damping on the performance of passive tuned-inerter devices. An inerter is a device that produces a force proportional to the relative acceleration across its two terminals; devices incorporating inerters have received widespread attention in the earthquake engineering community, because they offer the ability to improve the seismic response of structures. However, the majority of this research has assumed that the damping components within the tuned-inerter device exhibit viscous, rather than hysteretic, damping. This restriction imposes an essential question on how the hysteretic damping model will change the performance of the device compared with the viscous damping model. It is shown that the response of viscous and hysteretic inerter systems have significant differences in displacement amplitude due to the frequency dependency of the damping. Therefore, a new formulation for obtaining the optimum loss factor of the hysteretic damping in the inerter system is proposed. Next, the challenges associated with accurately predicting the time-response of a hysteretically damped system are discussed. A numerical time-integration method is extended to address these challenges, using a new formulation that has the benefit of being broadly applicable to multidegree-of-freedom hysteretic linear systems and nonstationary random signals. The results show that the earthquake responses from the hysteretic damping model can differ significantly from the ones obtained via the viscous model. 相似文献
8.
Force identification is a type of system identification procedure which determines applied force from system responses; it has engineering applications where direct measurements of forces are not feasible. To identify the force, one can consider that the system model and its parameters are known, and then use the measured response of the system to determine the unknown forces. In contrast, postulating the system model and its parameter values is a difficult task, especially when considering a nonlinear system where the model poses many unknowns or inherent mathematical problems. In this research, a more direct way to identify the unknown force without knowing the model of the system is proposed. The approach, called the sum of weighted acceleration technique (SWAT), is a method that can predict input forces with measured linear and nonlinear structural responses. SWAT employs measured accelerations multiplied by effective or optimal weights to estimate the input force. Results using this method show that the force calculated using SWAT accurately predicts the force which excites a nonlinear structure response. The technique could be applied to both constrained and unconstrained structures. 相似文献
9.
在不同频率特征的地震动作用下,三维隔震单层球面网壳结构隔震层最优阻尼设计不同.文中基于单自由度体系加速度传递率函数,提出一种地震动主频相关的加速度阈值变阻尼半主动控制方法以及地震动主频分区识别方法.基于ABAQUS软件的DLOAD子程序,开展了三维隔震单层球面网壳被动控制与半主动控制有限元计算,对节点加速度、杆件轴力进... 相似文献
10.
Optimum isolation damping for minimum acceleration response of base-isolated structures subjected to stationary random excitation is investigated. Three linear models are considered to account for the energy dissipation mechanism of the isolation system: a Kelvin element, a linear hysteretic element and a standard solid linear element, commonly used viscoelastic models for isolation systems comprising natural rubber bearings and viscous dampers. The criterion selected for optimality is the minimization of the mean-square floor acceleration response. The effects of the frequency content of the excitation and superstructure properties on the optimum damping and on the mean-square acceleration response are addressed. The study basically shows that the attainable reduction in the floor acceleration largely depends on the energy dissipation mechanism assumed for the isolation system as well as on the frequency content of the ground acceleration process. Special care should be taken in accurately modelling the mechanical behaviour of the energy dissipation devices. 相似文献
11.
地震动强度及频谱特征对场地地震反应分析结果的影响. 总被引：4，自引：3，他引：1
通过收集整理235个实际钻孔资料并建立了2820个计算工况,运用一维波动等效线性化地震反应分析方法,基于不同类别场地条件,研究在不同强度、频谱特性的地震动输入形式下,场地条件对地表地震动参数影响,重点考察地表峰值加速度的变化特征及规律,并对计算结果进行了统计回归分析,给出了不同场地类别条件下地表峰值放大倍数的一般经验值.由于我国现行抗震设计规范中,没有考虑地震烈度或地震动强度对设计反应谱的影响,也没有考虑地震动频谱特性对地表峰值的影响,因此,本文的研究成果可为未来修订抗震设计规范提供参考依据. 相似文献
12.
Graeme H. McVerry 《地震工程与结构动力学》1980,8(2):161-180
A method has been developed to identify the parameters of the lower modes of a linear, time-invariant model of a structure from its recorded earthquake response. The identification is performed by selecting the parameters to obtain a least squares fit over a specified frequency band between the unsmoothed, complex-valued finite Fourier transform of the recorded acceleration response and the corresponding transform calculated from the response of the model. By including the effects of the initial and final conditions in the analysis, only a portion of the recorded excitation and response acceleration histories need be considered. The method is demonstrated first by an application to generated test data, and then to measured earthquake response. 相似文献
13.
以1997年4月11日新疆伽师地震（Mw6.1）为例,详细介绍了近断层强地震动场的预测方法.首先,用有限断层震源建模方法建立了该次地震的震源模型;然后,基于动力学拐角频率的地震动随机模拟方法,模拟了该次地震仅有主震加速度记录、且位于巨厚土层上的三个台站的加速度时程,并用实际地震记录进行了验证.在此基础上,基于预测的近断层77个节点的加速度时程的峰值绘制了该次地震的加速度场.结果表明,上述方法模拟的加速度时程在0.5 Hz以上的高频段是可行的、实用的;预测的近断层加速度场具有非常明显的上盘效应.地表最大加速度的范围与断层面上最大凹凸体位置相对应,说明与断层面上凹凸体相对应的地面上的建（构）筑物将会遭受到较为严重的震害. 相似文献
14.
工程场地地震安评中加速度反应谱标准化问题的讨论 总被引：1，自引：1，他引：0
文中计算了不同地震输入模式下的拱桥地震反应,讨论了输入指定地震波进行时域计算结果和按对应的反应谱进行计算所得结果之间的差异,特别分析了分别按地震波的实际反应谱和经过标定的反应谱计算得到的拱桥地震反应之间的不同.数值结果表明:在工程场地地震安全性评价中,采用标准反应谱的方式所提供的场地地震加速度参数,将会抹杀土层场地动力特性对地表地震动的影响.因此,按此地震动参数进行结构反应计算时,有时会低估结构的地震反应,留下结构抗震不安全的隐患. 相似文献
15.
设计并完成比例尺1∶100的边坡振动台模型试验,讨论模型的相似关系、传感器的布置及模型的建造,并编制相应的动荷载加载方案。通过输入不同类型、不同幅值、频率的动荷载,分析模型边坡在地震作用下的动力响应规律以及地震动参数对边坡动力特性和动力响应的影响。试验结果表明,在坡体的表面和坡内的竖直方向上,加速度放大系数均随着高程增加而明显增大。当输入不同压缩比的地震波时,压缩比越大坡体的动力响应越明显,即随着输入动荷载的频率增加,越接近土体的自振频率加速度放大效应越明显;在坡体的同一高程处,坡面的加速度放大系数略大于坡体内的加速度放大系数,表现出一定的趋表效应,同时随着输入地震波振幅的增加,加速度放大系数整体出现递减的趋势。实验结果分析有助于揭示土质边坡在地震作用下的失稳破坏机制,为今后边坡工程的抗震设计提供积极的参考。 相似文献
16.
Anooshiravan Ansari Asadollah Noorzad Hamid Zafarani Hessam Vahidifard 《Soil Dynamics and Earthquake Engineering》2010
During the past earthquakes, many valuable acceleration time histories were recorded by analog and digital accelerometers. These records are important sources of information in the field of earthquake engineering and engineering seismology. However, a large number of these records are contaminated by noise and it is necessary to correct them for practical applications. On the other hand, only a few records can be corrected using conventional filtering because of mathematical limitations of the method. However, advances in the field of time–frequency analysis and wavelet transform theory provide useful non-linear and adaptive de-noising methods for removing of non-stationary and high-energy noise from the recorded signals. In this paper, the characteristics and capabilities of the modified non-linear adaptive wavelet de-noising method are examined for correction of highly noisy strong motion records. In the frequency domain, it is shown that this method can attenuate the noise in the whole frequency range of engineering interest while in the time domain it can detect and remove non-stationary noise. In addition, the displacement response spectra of these wavelet de-noised records are more stable than conventional filtered records with respect to different correction functions. It is found that a large number of noisy acceleration records that are usually discarded from sets of records used for estimating the ground motions can be corrected using this new method. 相似文献
17.
The equations of motion are derived for the first mode response of a linear multistorey structure having a linear vibration absorber attached to the roof. Furthermore, the variance of the first mode response to a gaussian white noise lateral base acceleration (as a model of earthquake excitation) is determined. Smallest possible values of the variance of the response along with corresponding absorber parameters are established using an optimization program. It is demonstrated that the absorber is quite effective in reducing first mode response for 5- and 10-storey structures even with relatively small values of the absorber mass. Moreover, minimal responses for the randomly excited single-degree-of-freedom system have been determined, and a design example is presented. The absorber system has potential application not only in earthquake engineering but also in aerospace and terrestrial vehicle design. 相似文献
18.
Simplification of strong ground motions to 1 cycle sine waves was investigated from the elastic and inelastic earthquake response analyses and response analyses under sine wave input using single‐degree‐of‐freedom systems. Strong ground motions could be simplified to 1 cycle sine waves if large plastic deformations, with ductility factor more than 2, were assumed. This is because the approximate maximum responses from input sine waves are determined by the initial response cycle, due to period elongation and plastic energy dissipation of the systems. A sine wave whose acceleration amplitude is the peak ground acceleration (PGA) and whose period is that of an equivalent 1 cycle sine wave is proposed. The period of an equivalent sine wave is easily obtained from the elastic response acceleration spectrum of a seismic record. This means that the inelastic responses are approximately determined by the PGA and an equivalent 1 cycle sine wave period. Therefore, an equivalent 1 cycle sine wave period provides a single index to express the frequency characteristics of a strong ground motion. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
19.
20.
根据天津波地表加速度记录和相应实测场地钻孔资料,采用等效线性化方法模拟土体非线性,进行了深厚软土场地基岩地震动反演,研究了频率截断对深厚软土场地基岩地震动反演的影响,为天津波地表加速度记录提供了相应的基岩地震动输入。研究表明:不同截断频率情况下,反演得到的基岩地震动峰值和反应谱曲线形状均相差悬殊,但反演后再正演所得到的地面运动与原地表记录相比,加速度时程曲线形状和峰值大小、反应谱曲线形状和峰值大小均非常接近;可根据工程需要对地表加速度记录进行不同频率的截断,反演得到所需强度的基岩地震动。 相似文献