首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Ivrea-Verbano Zone in northern Italy represents a section through the lower continental crust which has been tilted and emplaced into its present position during the Alpine orogeny. Recent and on-going structurally-oriented geological mapping in this region is providing new information about the geometry of the complex. The central part of the zone is dominated by a large basic complex (the 'mafic formation') which is intrusive into the surrounding gneisses. The foliation within the envelope of gneisses is deflected around the intrusive complex as if by ballooning, but in the region south-west of Monte Capio both units are folded together into a tight to isoclinal steeply plunging fold with an amplitude of c. 10 km. This fold locally inverts the stratigraphy of the layered basic group of the complex, and is thought to be the result of gravitational collapse following intrusion and inflation of a large magma body into the lower crust.
Several high-temperature shear zones have now been traced within the country rock for distances up to 20 km. The geometry of these, and their relationship to the basic complex suggests that at least some of the extensional collapse of the mafic body is related to uplift caused by intrusion of this body.
Close parallels can be drawn between the observed structure in the Ivrea-Verbano Zone (after removing the effects of late, low-temperature faulting and folding related to emplacement of the rocks into their present position), and those inferred from deep seismic reflection profiling in areas of current extension such as parts of the US Basin and Range province.  相似文献   

2.
Studies in intra-continental and intra-oceanic shear zones reveal structures that may be developed during the formation of a sheared passive continental margin.During the intra-continental shear stage of margin development, rapid vertical movement of the crust may occur resulting in small, tectonically-active basins containing thick sedimentary sequences. At deeper levels in the continental crust, more plastic deformation may lead to a zone of strongly sheared rocks that widens downwards. The tectonic fabric in this zone may exert some control over the subsequent development of the continent-ocean transition under the influence of regional stresses.The thermal event related to asthenosphere upwelling at sheared margins is a transient one and thus of less effect than the event on rifted margins. Nevertheless, following the event the cooling and contraction of oceanic crust against the continent may throw the oceanic crust into tension and lead to normal, block faulting in the oceanic regions analogous to the faulting seen in oceanic fracture zones. The subsidence of oceanic crust as it ages at the margin will either drag down the adjacent continental crust or, more likely, cause the oceanic crust to slip down by normal faulting along the continent-ocean boundary. The kinds of compressional features observed in oceanic fracture zones may also occur at sheared margins.  相似文献   

3.
杨文采 《地质论评》2014,60(5):945-961
本篇讨论大陆岩石圈拆沉、伸展与裂解作用过程。由于大陆岩石圈厚度大而且很不均匀,产生裂谷的机制比较复杂。大陆碰撞远程效应的触发,岩石圈拆沉,以及板块运动的不规则性和地球应力场方向转折,都可能产生岩石圈断裂和大陆裂谷。岩石圈拆沉为在重力作用下"去陆根"的作用过程,演化过程可分为大陆根拆离、地壳伸展和岩石圈地幔整体破裂三个阶段。大陆碰撞带、俯冲的大陆和大洋板块、克拉通区域岩石圈,都可能产生岩石圈拆沉。大陆岩石圈调查表明,拉张区可见地壳伸展、岩石圈拆离、软流圈上拱和热沉降;它们是大陆岩石圈伸展与裂解早期的主要表现。从初始拉张的盆岭省到成熟的张裂省,拆离后地壳伸展成复式地堑,下地壳幔源玄武岩浆侵位,断裂带贯通并切穿整个岩石圈,表明地壳伸展进入成熟阶段。中国东北松辽盆地和西欧北海盆地曾处于成熟的张裂省。岩石圈破裂为岩浆侵位提供了阻力很小的通道网。岩浆侵位作用伴随岩石圈破裂和热流体上涌,成熟的张裂省可发展成大陆裂谷。多数的大陆裂谷带并没有发展成威尔逊裂谷带和洋中脊,普通的大陆裂谷要演化为威尔逊裂谷带,必须有来自软流圈的长期和持续的热流和玄武质岩浆的供应。威尔逊裂谷带岩石圈地幔和软流圈为地震低速带,其根源可能与来自地幔底部的地幔热羽流有关。  相似文献   

4.
Caledonian eclogite facies shear zones developed from Grenvillian garnet granulite facies anorthosites and gabbros in the Bergen Arcs of western Norway allow direct investigation of the relations between macroscopic structures and crystallographic preferred orientation (CPO) in lower continental crust. Field relations on the island of Holsnøy show that the eclogites formed locally from granulite facies rocks by progressive development of: (1) eclogite adjacent to fractures; (2) eclogite in discrete shear zones (> 2 m thick); (3) eclogite breccia consisting of >80% well-foliated eclogite that wraps around rotated granulite blocks; and (4) anastomosing, subparallel, eclogite facies shear zones 30–100 m thick continuous over distances > 1 km within the granulite terrane. These shear zones deformed under eclogite facies conditions at an estimated temperature of 670 ± 50°C and a minimum pressure of 1460 MPa, which corresponds to depths of >55 km in the continental crust. Detailed investigation of the major shear zones shows the development of a strong foliation defined by the shape preferred orientation of omphacite and by alternating segregations of omphacite/garnet-rich and kyanite/zoisite-rich layers. A consistent lineation throughout the shear zones is defined by elongate aggregates of garnet and omphacite. The CPO of omphacite, determined from five-axis universal stage measurements, shows a strong b-axis maximum normal to foliation, and a c-axis girdle within the foliation plane with weak maxima parallel to the lineation direction. These patterns are consistent with deformation of omphacite by slip parallel to [001] and suggest glide along (010). The lineation and CPO data reveal a consistent sense of shear zone movement, although the displacement was small. Localized faulting of high-grade rocks accompanied by fluid infiltration can be an important mode of failure in the lower continental crust. Field relations show that granulite facies rocks can exist in a metastable state under eclogite facies conditions and imply that the lower crust can host differing metamorphic facies at the same depth. Deformation of granulite and partial conversion to eclogite, such as is exposed on Holsnøy Island, may be an orogenic-scale process in the lowermost crust of collisional orogens.  相似文献   

5.
The composite airborne total intensity map of the Southern Granulite Terrain (SGT) at an average elevation of 7000' (≈ 2100 m) shows bands of bipolar regional magnetic anomalies parallel to the structural trends suggesting the distribution of mafic/ultramafic rocks that are controlled by regional structures/shear zones and thrusts in this region. The spectrum and the apparent susceptibility map computed from the observed airborne magnetic anomalies provide bands of high susceptibility zones in the upper crust associated with known shear zones/thrusts such as Transition Zone, Moyar-Bhavani and Palghat-Cauvery Shear Zones (MBSZ and PCSZ). The quantitative modelling of magnetic anomalies across Transition Zone, MBSZ and PCSZ suggest the presence of mafic rocks of susceptibility (1.5-4.0 × 10−3 CGS units) in upper crust from 8-10 km extending up to about 21-22 km, which may represent the level of Curie point geotherm as indicated by high upper mantle heat flow in this section.Two sets of paired gravity anomalies in SGT and their modelling with seismic constraints suggest gravity highs and lows to be caused by high density mafic rocks along Transition Zone and Cauvery Shear Zone (CSZ) in the upper crust at depth of 6-8 km and crustal thickening of 45-46 km south of them, respectively. High susceptibility and high density rocks (2.8 g/cm3) along these shear zones supported by high velocity, high conductivity and tectonic settings suggest lower crustal mafic/ultramafic granulite rocks thrusted along them. These signatures with lower crustal rocks of metamorphic ages of 2.6-2.5 Ga north of PCSZ and Neoproterozoic period (0.6-0.5 Ga) south of it suggest that the SGT represents mosaic of accreted crust due to compression and thrusting. These observations along with N-verging thrusts and dipping reflectors from Dharwar Craton to SGT suggest two stages of N-S directed compression: (i) between Dharwar Craton and northern block of SGT during 2.6-2.5 Ga with Transition Zone and Moyar Shear towards the west as thrust, and (ii) between northern and southern blocks of SGT with CSZ as collision zone and PCSZ as thrust during Neoproterozoic period (0.6-0.5 Ga). The latter event may even represent just a compressive phase without any collision related to Pan-African event. The proposed sutures in both these cases separate gravity highs and lows of paired gravity anomalies towards north and south, respectively. The magnetic anomalies and causative sources related to Moyar Shear, MBSZ and PCSZ join with those due to Transition Zone, Mettur and Gangavalli Shears in their eastern parts, respectively to form an arcuate-shaped diffused collision zone during 2.6-2.5 Ga.Most of the Proterozoic collision zones are highlands/plateaus but the CSZ also known as the Palghat Gap represents a low lying strip of 80-100 km width, which however, appears to be related to recent tectonic activities as indicated by high upper mantle heat flow and thin crust in this section. It is supported by low density, low velocity and high conductive layer under CSZ and seismic activity in this region as observed in case of passive rift valleys. They may be caused by asthenospheric upwarping along pre-existing faults/thrusts (MBSZ and PCSZ) due to plate tectonic forces after the collision of Indian and Eurasian plates since Miocene time.  相似文献   

6.
In the Central Rhodopes of southern Bulgaria, an eclogite-bearing rock sheet belonging to the Middle Allochthon (Starcevo Unit) is over- and underlain by eclogite-free, amphibolite-facies rock units along low-angle shear zones, the Borovica Shear Zone at the top and the Starcevo-Ardino Shear Zone at the base. The age of these shear zones is determined by U–Pb zircon dating of pre-, syn- and posttectonic magmatic rocks, mostly pegmatite veins, using LA–SF–ICP–MS. Zircons from pre- to syntectonic pegmatites within the Borovica Shear Zone yielded ages of ca. 45–43?Ma, indicating that the shear zone was active at that time, and zircons from a pretectonic pegmatite and a posttectonic granitoid body within the Starcevo-Ardino Shear Zone yielded ages of ca. 45 and ca. 36?Ma, respectively, giving a time frame for the activity of that shear zone which probably rather postdated the activity of the Borovica Shear Zone. By combining the ages with the kinematics of the shear zones and the metamorphic history of the rock units, the following scenario is sketched: Soon after the Starcevo Unit reached peak pressure (eclogite facies), it was exhumed to a mid-crustal level by top-to-the-north-west, extensional unroofing along the Borovica Shear Zone, in a kinematic framework of orogen-parallel extension. Beginning at ca. 40?Ma, the partly exhumed Starcevo Unit was underthrust from the south-west by continental crust of the foreland (Apulia), forming the Lower Allochthon of the Rhodopes, along the Starcevo-Ardino Shear Zone. These results underline the significance of orogen-parallel extension for the exhumation of high-pressure rocks. With respect to regional geology of the Hellenides and the Aegean, it is found that the tectonic architecture of the Rhodopes is essentially of Tertiary age. Cretaceous syn-metamorphic shear zones do exist but are largely restricted to higher levels of the nappe stack (Upper Allochthon). The Rhodopes do not represent an older essentially Mesozoic core of the Hellenides but are formed by the internal, higher-metamorphic portions of the same major nappe systems as occur in the Hellenides.  相似文献   

7.
Emphasized in this paper are the deformation processes and rheologies of rocks at high temperatures and high effective pressures, conditions that are presumably appropriate to the lower crust and upper mantle in continental collision zones. Much recent progress has been made in understanding the flexure of the oceanic lithosphere using rock-mechanics-based yield criteria for the inelastic deformations at the top and base. At mid-plate depths, stresses are likely to be supported elastically because bending strains and elastic stresses are low. The collisional tectonic regime, however, is far more complex because very large permanent strains are sustained at mid-plate depths and this requires us to include the broad transition between brittle and ductile flow. Moreover, important changes in the ductile flow mechanisms occur at the intermediate temperatures found at mid-plate depths.Two specific contributions of laboratory rock rheology research are considered in this paper. First, the high-temperature steady-state flow mechanisms and rheology of mafic and ultramafic rocks are reviewed with special emphasis on olivine and crystalline rocks. Rock strength decreases very markedly with increases in temperature and it is the onset of flow by high temperature ductile mechanisms that defines the base of the lithosphere. The thickness of the continental lithosphere can therefore be defined by the depth to a particular isotherm Tc above which (at geologic strain rates) the high-temperature ductile strength falls below some arbitrary strength isobar (e.g., 100 MPa). For olivine Tc is about 700°–800°C but for other crustal silicates, Tc may be as low as 400°–600°C, suggesting that substantial decoupling may take place within thick continental crust and that strength may increase with depth at the Moho, as suggested by a number of workers on independent grounds. Put another way, the Moho is a rheological discontinuity. A second class of laboratory observations pertains to the general phenomenon of ductile faulting in which ductile strains are localized into shear zones. Ductile faults have been produced in experiments of five different rock types and is generally expressed as strain softening in constant-strain-rate tests or as an accelerating-creep-rate stage at constant differential stress. A number of physical mechanisms have been identified that may be responsible for ductile faulting, including the onset of dynamic recrystallization, phase changes, hydrothermal alteration and hydrolytic weakening. Microscopic evidence for these processes as well as larger-scale geological and geophysical observations suggest that ductile faulting in the middle to lower crust and upper mantle may greatly influence the distribution and magnitudes of differential stresses and the style of deformation in the overlying upper continental lithosphere.  相似文献   

8.
The Southern Granulite Terrain with exposed Archean lower crustal rocks is studied using various geophysical tools. The crustal structure derived from seismic reflection and refraction/wide-angle reflection studies is used to understand the tectonic evolution of the region. Deep seismic reflection section along the Kolattur–Palani segment shows an oppositely dipping reflection fabric near the Moyar–Bhavani shear zone, which is interpreted as a signature of collision between the Dharwar craton and another crustal block in the south. The thickened crust due to collision was delaminated during the orogenic collapse and modified the central part, covering the Cauvery Shear Zone system, located between the Moyar–Bhavani and Karur–Oddanchatram shear zones. The delaminated lower crust is altered by magmatic underplating as evidenced by the high velocity layer just above the Moho. The velocity model of the region indicates crustal thickening at the boundary of the Dharwar craton and Moyar–Bhavani shear zone and thinning further south. Back-scattered seismic wave field with negative moveout and the Moho-offset indicate the spatial location and strike-slip nature of the shear zones. Present study suggests that the late Archean collision and suturing of the Dharwar craton with the southern crustal block at the Moyar–Bhavani shear zone may be responsible for the evolution of late Archean granulites. Late Neoproterozoic rifting is observed along the paleo-fault zones. The seismic studies constrained by gravity, magnetic and magnetotelluric data suggest that the Moyar–Bhavani and Karur–Oddanchatram shear zones of the Cauvery Shear Zone system mark terrane boundaries/suture zones.  相似文献   

9.
Until the middle of the 20th century, the continental crust was considered to be dominantly granitic. This hypothesis was revised after the Second World War when several new studies led to the realization that the continental crust is dominantly made of metamorphic rocks. Magmatic rocks were emplaced at peak metamorphic conditions in domains, which can be defined by geophysical discontinuities. Low to medium-grade metamorphic rocks constitute the upper crust, granitic migmatites and intrusive granites occur in the middle crust, and the lower crust, situated between the Conrad and Moho discontinuities, comprises charnockites and granulites. The continental crust acquired its final structure during metamorphic episodes associated with mantle upwelling, which mostly occurred in supercontinents prior to their disruption, during which the base of the crust experienced ultrahigh temperatures (>1000 °C, ultrahigh temperature granulite-facies metamorphism). Heat is provided by underplating of mantle-derived mafic magmas, as well as by a massive influx of low H2O activity mantle fluids, i.e. high-density CO2 and high-salinity brines. These fluids are initially stored in ultrahigh temperature domains, and subsequently infiltrate the lower crust, where they generate anhydrous granulite mineral assemblages. The brines can reach upper crustal levels, possibly even the surface, along major shear zones, where granitoids are generated through brine streaming in addition to those formed by dehydration melting in upper crustal levels.  相似文献   

10.
豫南熊店高压变质岩块体经历了６期变形和变质作用,即从深地壳层次挤压缩短体制下的不均匀韧性剪切、榴辉岩进变质作用,到中地壳层次挤压体制下的逆冲推覆、钠长绿帘角闪岩相退变质作用,到地壳浅层伸展体制下的脆性—韧性滑脱、绿片岩相变质作用,以及更浅层次的脆性变形,动力变质作用。高压变质岩的形成与向地壳中、浅层次的大幅度抬升均是在挤压机制下韧性变形作用的结果,而高压变质岩暴露到地表是伸展滑脱、断块升降和差异抬升所致。  相似文献   

11.
许继峰  王强 《地学前缘》2003,10(4):401-406
Adakitic火成岩可以通过几种不同的岩浆作用方式产生,其中下地壳镁铁质岩石的直接部分熔融和拆沉下地壳的部分熔融可能是两种重要的adakitic火成岩形成方式。在一个大陆厚地壳背景,adakitic火成岩的产生指示了它们的岩浆源区位于大于40 km的下地壳之中,因此,暗示该大陆地壳的最小厚度超过40 km。青藏高原腹地的羌塘地区分布有40 Ma左右的“低镁”和“高镁”adakitic安山岩-英安岩-流纹岩,它们应分别是青藏高原厚大陆地壳下部镁铁质岩石直接部分熔融和拆沉的下地壳脱水熔融的产物。这套adakitic火山岩的厘定指示出在40 Ma左右时,青藏羌塘地区或更大范围的大陆地壳已经加厚到超过40 km,其地表在当时或稍后可能已经开始了隆升。  相似文献   

12.
赵靖  刘顺 《高校地质学报》1998,4(2):155-156
酸性和基性麻粒岩的高温度压实验表明,基稳态流动律分别为：ε＝２０．７ｅｘｐ（－２８８／ＲＴ）·Δσ＾３．０和ε＝１０＾６．５９ｅｘｐ（－４２５／ＲＴ）·Δσ＾３．０２,并可与加拿大地盾的麻粒岩流动津相比。在下地壳的温度７００℃-１０００℃、压力１．０Ｇｐａ-１．２ＧＰａ和应变率１０＾－４／ｓ￣１０＾－７／ｓ条件下,岩石变形以韧性变形为主,并发育韧性剪切带,其中辉石和斜长石极易发生动态重结晶及定向排成线理,石英则巳静态恢复,此结果与野外观察的吻合。下地壳的宏观流变模型显示,增厚型下地壳存在一厚的低蠕变强度层,减薄型地壳则上地壳也出现低强度层,太陆下地壳这种低蠕变强度层的流变性质有助于岩石圈增厚和减薄的发生。  相似文献   

13.
There is a coupling of thermal, mechanical, chemical and fluidal processes in a continental shear zone. Both Xincheng-Xishui and Hetai shear zones are typical continental crust shear zones of greenschist facies environment. The representative mylonite zones of the shear zones are studied with whole rock major and trace element analyses. The chemical compositional variation tendencies in both shear zones are very similar and the gain-loss ratios of various components in the mylonitic rocks are reflected in the mass balance equations. The enrichment of those immobile high-field-strengh elements is considered to he related to the volume loss of the myionitic rocks in a shear zone. Based on the volume loss expression C_s/C_o=1/(1-V),the fractional volume losses (V)are 37.5％ and 36.5％-42.3％ respectively for mylonites and ultramylonites in the Xincheng-Xishui shear zone and 11％ and 28％ respectively for mylonites and phyllonites in the Hetai shear zone. The high volume loss and large removal of SiO_2 from  相似文献   

14.
In this paper, we present a sedimentary and structural analysis that together with maps, sections and new Ar/Ar data enable to describe the tectono-sedimentary evolution of the Mauléon hyper-extended rift basin exposed in the W-Pyrenees. Hyper-extension processes that ultimately resulted in exhuming mantle rocks are the result of the subsequent development of two diachronous detachment systems related to two evolutional stages of rifting. An initial Late Aptian Early Albian crustal thinning phase is first recorded by the development of a crustal necking zone controlled by the north-vergent Southern Mauléon Detachment system. During a subsequent exhumation phase, active faulting migrates to the north with the emplacement of the Northern Mauléon detachment system that exhumed north section thinned continental crust and mantle rocks. This diachronous crustal thinning and exhumation processes are also recorded by the diachronous deposition of syn-tectonic sedimentary tracts above the two supra-detachment sub-basins. Syn-tectonic sedimentary tracts record the progressive exhumation of footwall rocks along detachment systems. Tectonic migration from the southern to the northern Mauléon Detachment system is recorded by the coeval deposition of “sag” deposits above the necking zone basin and of syn-tectonic tracts above exhumed rocks north section. Located on a hanging-wall situation related to the Mauléon hyper-extension structures, the Arzacq Basin also records a major crustal thinning phase as shown by its subsidence evolution so as by deep seismic images. The absence of major top-basement structures and its overall sag morphology suggest that crustal thinning processes occurred by decoupled extension of lower crustal levels contrasting with the Southern Mauléon Detachment system. Reconciling observations from the Mauléon and Arzacq Basins, we finally propose in this paper that they were the result of one and the same asymmetric crustal thinning and exhumation processes, where extension is accommodated into the upper crust in the Mauléon Basin (lower plate basin) and relayed in ductile lower crust below the Arzacq Basin (upper plate basin).  相似文献   

15.
A 1000-km-long lithospheric transect running from the Variscan Iberian Massif (VIM) to the oceanic domain of the Northwest African margin is investigated. The main goal of the study is to image the lateral changes in crustal and lithospheric structure from a complete section of an old and stable orogenic belt—the Variscan Iberian Massif—to the adjacent Jurassic passive margin of SW Iberia, and across the transpressive and seismically active Africa–Eurasia plate boundary. The modelling approach incorporates available seismic data and integrates elevation, gravity, geoid and heat flow data under the assumptions of thermal steady state and local isostasy. The results show that the Variscan Iberian crust has a roughly constant thickness of 30 km, in opposition to previous works that propose a prominent thickening beneath the South Portuguese Zone (SPZ). The three layers forming the Variscan crust show noticeable thickness variations along the profile. The upper crust thins from central Iberia (about 20 km thick) to the Ossa Morena Zone (OMZ) and the NE region of the South Portuguese Zone where locally the thickness of the upper crust is <8 km. Conversely, there is a clear thickening of the middle crust (up to 17 km thick) under the Ossa Morena Zone, whereas the thickness of the lower crust remains quite constant (6 km). Under the margin, the thinning of the continental crust is quite gentle and occurs over distances of 200 km, resembling the crustal attitude observed further north along the West Iberian margins. In the oceanic domain, there is a 160-km-wide Ocean Transition Zone located between the thinned continental crust of the continental shelf and slope and the true oceanic crust of the Seine Abyssal Plain. The total lithospheric thickness varies from about 120 km at the ends of the model profile to less than 100 km below the Ossa Morena and the South Portuguese zones. An outstanding result is the mass deficit at deep lithospheric mantle levels required to fit the observed geoid, gravity and elevation over the Ossa Morena and South Portuguese zones. Such mass deficit can be interpreted either as a lithospheric thinning of 20–25 km or as an anomalous density reduction of 25 kg m−3 affecting the lower lithospheric levels. Whereas the first hypothesis is consistent with a possible thermal anomaly related to recent geodynamics affecting the nearby Betic–Rif arc, the second is consistent with mantle depletion related to ancient magmatic episodes that occurred during the Hercynian orogeny.  相似文献   

16.
地壳与弱化岩石圈地幔的相互作用:以燕山造山带为例   总被引：11，自引：2，他引：9  
燕山造山带中生代发育4期钙碱性火山活动,它们的源区组成都是受壳幔相互作用的制约,其中髫髻山组和义县组分布广泛,具有代表性．髫髻山组岩性比较单一,地球化学参数变化范围小,岩浆的AFC作用不强烈,源区成分不复杂．依据Kay et al．(1991)的方法,估算了早-中侏罗世燕山地区的地壳厚度为40-45 km.髫髻山组粗安岩是在加厚的地壳 (40-45 km)条件下,源区是含角闪石的石榴石麻粒岩 底侵的基性岩的壳幔过渡带熔融形成．义县组火山岩的源区为下地壳 岩石圈地幔,地幔组分较髫髻山组增加．研究区中生代早期地壳开始加厚,发生下地壳拆沉,进入流变学性质改变了的“弱化的岩石圈地幔”,二者发生作用．岩石圈地幔在中生代晚期受到流体、熔体、地幔矿物中活化的分子水、剪切构造作用,以及温、压条件改变的影响,导致岩石圈地幔发生不均一的局部弱化,为容纳拆沉的下地壳提供了优化场所．推测弱化岩石圈地幔出现于135 Ma以后燕山地区发育的小型拉伸盆地之下,以及对应的小型软流圈底辟体之上．上述模型可以与俯冲带的楔形地幔与俯冲洋壳的相互作用相对比．  相似文献   

17.
Conflicting opinions exist concerning the structure and the post-Hercynian evolution of the Serre. The present paper deals with these topics on the basis of new geological, petrological and radiometric evidence. The composition of the so-called Stilo and Polia-Copanello units has been redefined. The above domains—former sections of upper and lower Palaeozoic continental crust respectively—came into contact, due to transcurrent movements 130–140 Ma ago. A significant vertical component during the transcurrent movements, probably, exhumed the former section of lower crust. The above domains, juxtaposed, were successively involved as a single kinematic body in the Alpine orogenesis. The results enable us to make inferences for the Calabrian Arc evolution and call attention to similarities between an Austro-Alpine element (Stilo + Polia-Copanello) of the Calabrian chain and a South-Alpine sector of the Alps (Ivrea + Ceneri zones).  相似文献   

18.
The chemical and petrological composition of mafic rocks from the lower continental crust are discussed by comparing mafic granulites and meta-gabbroic rocks from the Ivrea Zone and the Northern Hessian Depression (NHD) xenolith suite. Both regions contain contrasting types of meta-mafic lithologies (i) former basaltic rocks with trace element patterns ranging from MORB-Iike to subduction-related or intra-plate tholeütes and (ü) Ca-and Al-enriched, plagiodase-dominated gabbroic rocks showing positive Eu-anomalies generated by complex deep crustal magmatic processes such as fractionation, accumulation of plagiodase and pyroxene, and crustal contamination. The absence of typical garnet-omphadte parageneses in these rocks indicates that the eclogite stability field was not reached during Palaeozoic orogenic processes. A compilation of experimentally determined P-wave velocities and densities for mafic granulites, gabbroic rocks, eclogites and peridotites is used to evaluate key physical properties of lower crustal mafic rocks during crystal thickening caused by continent-continent collision. In a step-by-step scenario it is demonstrated that the position of the seismic Moho (defined as a first-order velocity discontinuity) and the petrological Moho (defined as the boundary between non-peridotitic crustal rocks and olivine-dominated rocks) is not identical for the case that mafic rocks are transformed into edogites at the base of orogenically thickened crust. P-wave velocities of eclogites largely overlap with those of peridotites, although their densities are significantly higher than common upper mantle rocks. As a consequence, refraction seismic field studies may not detect edogites as crustal rocks. This means that the seismic Moho detected by refraction seismic field studies appears at the upper boundary between edogites and overlying crustal units. Since edogites generally have higher densities than peridotites, they might be recycled into the deeper lithosphere thereby transferring excess Eu into the upper mantle. This process could be a due for understanding the negative Euanomaly in the upper continental crust which is apparently not balanced quantitatively by the abundance of common mafic crustal rocks.  相似文献   

19.
Cretaceous-Paleogene granitoid rocks and contemporaneous volcanic rocks are widely distributed in the Inner Zone of Southwest Japan. This intense intermediate to felsic magmatism is considered to have taken place on the eastern margin of the Eurasian Continent, before the Southwest Japan Arc drifted away from the continent in the middle Miocene, resulting in the opening of the Japan Sea. The granitoid rocks show regional variations in terms of their radiometric age, petrography, Sr, Nd and O isotope ratios. Based on Sr and Nd isotope ratios, granitoid rocks can be divided into three zones (South, Transitional and North) between the Median Tectonic Line and the Japan Sea. Granitoid rocks and associated gabbros of the North Zone have low initial Sr isotope ratios (0.7048 to 0.7068) and high initial Nd values (+3 to-2.2), whereas granitoid rocks and gabbros from the South Zone have high initial Sr isotope ratios (0.7070 to 0.7088) and low initial Nd values (-3.0to-8.0). Most granitoid rocks from the Transitional Zone have Sr and Nd isotope ratios that lie between those of the North and South Zones, although there is some overlap. Contamination of magmas by upper crust cannot explain this geographical variation in Sr and Nd isotopes. Instead, the regional variation is attributed to compositionally different, magma sources (probably upper mantle and lower crust), beneath the North and South Zones. This is supported by the Sr and Nd isotopic ratios of upper mantle and lower crustal xenoliths included in Cenozoic volcanic rocks in the North and South Zones. These ratios are similar to those of the granitoid rocks in the respective zones. It is suggested that a micro-continent or island arc consisting of continental crust was underthrust beneath the South Zone before or during the Cretaceous, resulting in compositionally distinct sources for granitoid rocks of the North and South Zones. The large variation observed in Sr and Nd isotope ratios for Transitional Zone granitoid rocks is explained by variable proportions of the two different crustal and upper mantle components.  相似文献   

20.
《Gondwana Research》2016,29(4):1329-1343
Continental rifting to seafloor spreading is a continuous process, and rifting history influences the following spreading process. However, the complete process is scarcely simulated. Using 3D thermo-mechanical coupled visco-plastic numerical models, we investigate the complete extension process and the inheritance of continental rifting in oceanic spreading. Our modeling results show that the initial continental lithosphere rheological coupling/decoupling at the Moho affects oceanic spreading in two manners: (1) coupled model (a strong lower crust mechanically couples upper crust and upper mantle lithosphere) generates large lithospheric shear zones and fast rifting, which promotes symmetric oceanic accretion (i.e. oceanic crust growth) and leads to a relatively straight oceanic ridge, while (2) decoupled model (a weak ductile lower crust mechanically decouples upper crust and upper mantle lithosphere) generates separate crustal and mantle shear zones and favors asymmetric oceanic accretion involving development of active detachment faults with 3D features. Complex ridge geometries (e.g. overlapping ridge segments and curved ridges) are generated in the decoupled models. Two types of detachment faults termed continental and oceanic detachment faults are established in the coupled and decoupled models, respectively. Continental detachment faults are generated through rotation of high angle normal faults during rifting, and terminated by magmatism during continental breakup. Oceanic detachment faults form in oceanic crust in the late rifting–early spreading stage, and dominates asymmetric oceanic accretion. The life cycle of oceanic detachment faults has been revealed in this study.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号