首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Amazon Deep-Sea Fan began to form in the Early Miocene and is characterized by a highly meandering distributary channel system. On the middle fan, these leveed channels coalesce to form two broad levee complexes. Older, now buried levee complexes are also observed within the fan. These levee complexes grow through channel migration, branching, and avulsion. Probably only one or two channels are active at any given time. Sediments reach the fan only during glacio-eustatic low stands of sea level. Coarse sediments largely by-pass the upper and middle fan via the channels and are deposited on the lower fan. Margin setting represents fan and/or source area  相似文献   

2.
Shallow 3D seismic data show contrasting depositional patterns in Pleistocene deepwater slopes of offshore East Kalimantan, Indonesia. The northern East Kalimantan slope is dominated by valleys and canyons, while the central slope is dominated by unconfined channel–levee complexes. The Mahakam delta is immediately landward of the central slope and provided large amounts of sediments to the central slope during Pleistocene lowstands of sea level. In the central area, the upper slope contains relatively straight and deep channels. Sinuous channel–levee complexes occur on the middle and lower slope, where channels migrated laterally, then aggraded and avulsed. Younger channel–levee complexes avoided bathymetric highs created by previous channel–levee complexes. Levees decrease in thickness down slope. Relief between channels and levees also decreases down slope.North of the Mahakam delta, siliciclastic sediment supply was limited during the Pleistocene, and the slope is dominated by valleys and canyons. Late Pleistocene rivers and deltas were generally not present on the northern outer shelf. Only one lowstand delta was present on the northern shelf margin during the upper Pleistocene, and sediments from that lowstand delta filled a pre-existing slope valley complex and formed a basin-floor fan. Except for that basin-floor fan, the northern basin floor shows no evidence of sand-rich channels or fans, but contains broad areas with chaotic reflectors interpreted as mass transport complexes. This suggests that slope valleys and canyons formed by slope failures, not by erosion associated with turbidite sands from rivers or deltas. In summary, amount of sediment coming onto the slope determines slope morphology. Large, relatively steady input of sediment from the Pleistocene paleo-Mahakam delta apparently prevented large valleys and canyons from developing on the central slope. In contrast, deep valleys and canyons developed on the northern slope that was relatively “starved” for siliciclastic sediment.  相似文献   

3.
The upper Indus Fan is characterized by an average 1∶500 gradient, chanels with 100 m high levees, several continuous subbottom reflectors on 3.5-kHz records, and generally fine-grained sediments. Multichannel seismics show the levee complexes typified by overlapping wedge-shaped reflection sets and channel axis by high-amplitude discontinuous reflections. The middle fan has 1∶500–1∶1000 gradients and channels with ≈20 m high levees. The lower fan has gradients less than 1∶1000, channels with 8–20 m high levees, few or no subbottom reflectors on 3.5-kHz records, and high sand content. Besides the dominant unchannelized turbidity currents, channelized and overbank flows also played a significant role in the sedimentation of the lower fan.  相似文献   

4.
The upper Indus Fan is characterized by an average 1∶500 gradient, chanels with 100 m high levees, several continuous subbottom reflectors on 3.5-kHz records, and generally fine-grained sediments. Multichannel seismics show the levee complexes typified by overlapping wedge-shaped reflection sets and channel axis by high-amplitude discontinuous reflections. The middle fan has 1∶500–1∶1000 gradients and channels with ≈20 m high levees. The lower fan has gradients less than 1∶1000, channels with 8–20 m high levees, few or no subbottom reflectors on 3.5-kHz records, and high sand content. Besides the dominant unchannelized turbidity currents, channelized and overbank flows also played a significant role in the sedimentation of the lower fan. Margin setting represents fan and/or source area  相似文献   

5.
The Ebro Fan System consists of en echelon channel-levee complexes, 50×20 km in area and 200-m thick. A few strong reflectors in a generally transparent seismic facies identify the sand-rich channel floors and levee crests. Numerous continuous acoustic reflectors characterize overbank turbidites and hemipelagites that blanket abandoned channel-levee complexes. The interlobe areas between channel complexes fill with homogeneous mud and sand from mass flow and overbank deposition; these exhibit a transparent seismic character. The steep continental rise and sediment “drainage” of Valencia Trough at the end of the channel-levee complexes prevent the development of distributary channels and midfan lobe deposits. Margin setting represents fan and/or source area  相似文献   

6.
The Mississippi Fan is a large, mud-dominated submarine fan over 4 km thick, deposited in the deep Gulf of Mexico during the late Pliocene and Pleistocene. Analysis of 19,000 km of multifold seismic data defined 17 seismic sequences, each characterized by channel, levee, and associated overbank deposits, as well as mass transport deposits. At the base of nine sequences are a series of seismic facies consisting of mounded, hummocky, chaotic, and subparallel reflections, which constitute 10–20% of the sediments in each the sequences. These facies are externally mounded and occur in two general regions of the fan: (1) in the upper and middle fan they are elongate in shape and mimic the channel's distribution; (2) in the middle fan to lower fan they are characterized by a fan-shaped distribution, increasing in width downfan. These facies are interpreted to have formed as disorganized slides, debris flows, and turbidites (informally called “mass transport complexes”). Overlying this basal interval, characteristic of all sequences, are well-developed channel-levee systems that constitute 80–90% of the fan's sediments. Channels consist of high amplitude, subparallel reflections, whereas the flanking levee sediments appear as subparallel reflections that have high amplitudes at the base changing upward to low amplitude. The vertical change in amplitude may reflect a decrease in grain size and bed thicknesses. Overbank sediments are characterized by interbedded subparallel to hummocky and mounded reflections, suggesting both turbidites from the channel, as well as slides and debris flows derived both locally and from the slope updip.  相似文献   

7.
运用近年来采集的高分辨率地震资料和多波束测深数据,在珠江海谷及西北次海盆深海平原区发现大规模发育的第四纪重力流沉积体系,该沉积体系沿珠江海谷以北西-南南东方向贯穿整个北部陆坡,进入西北次海盆后呈扇形展开,形成珠江海谷-西北次海盆大型深水浊积扇系统。据沉积体系空间展布特征差异,将珠江海谷划分为北、中、南三段,北段为过路侵蚀和水道下切,中段以水道充填和天然堤沉积为主,南段以水道-天然堤和朵叶体沉积共存为特征,揭示出北部陆坡珠江海谷是珠江口外陆缘物质输送海盆深海平原的主要通道;海盆区总体以朵叶体发育为特色,呈扇形展布。深水扇系统可分为三期次沉积体,其区域结构记录了重力流沉积物从侵蚀、卸载到南海海盆作为限制性盆地接收陆源沉积物的全过程,为“源-渠-汇”的研究构建了一个完美的范例。本文以珠江海谷-西北次海盆第四纪深水浊积扇沉积体系为例,完整地揭示了水道-扇体的组构和特征,清晰呈现了陆坡-海盆砂体展布的规律,可为建立南海北部新近纪早期深水扇形成模式提供参考,有助于指导南海深水油气勘探工作。  相似文献   

8.
The Pab Formation consists of deltaic and turbiditic sediments which were deposited during the Late Maastrichtian on the Indo-Pakistani passive margin. The margin geometry has been restored in the Pab Range from a regional transect 120 km long. Two superposed turbiditic systems onlap the slope carbonates and completely pinch-out southward. The lowest turbiditic system (Lower Pab) is a sand-rich basin floor fan, which consists of sand-rich channel complexes distally passing to lobes northward. This basin floor fan is overlain by a mud-rich slope fan formed during the subsequent sea-level rise, which drowned the shelf. The upper turbiditic system (Upper Pab) is a sand-rich slope fan, formed during the progradation of a deltaic system in the shelf setting. It consists of prograding tabular lobes passing upward to conglomeratic channels, and thins out northwards. The Lower Pab turbiditic system consists of three channel complexes (LP1, 2, 3) organised in a backstepping succession. Each channel complex has a multi-storey internal architecture, resulting from the amalgamation of several individual turbiditic channels. Five major facies associations have been determined in the LP3 channel complex. FA-1 corresponds to polygenic and monogenic debris-flows, FA-2 to high-density gravelly or sandy turbidites, FA-3 to by-pass deposits, FA-4 to thin-bedded turbidites (spill-over lobes and levees) and FA-5 to hemipelagites. The downstream evolution of the LP3 channel complex can be studied from canyon to mid-fan settings. Where it is confined in the canyon, the channel complex is 50 m thick and 1 km large, and shows a high sand/shale ratio. The development of overflow deposits is limited and occurs only at the top of the channel complex. At the canyon mouth, the channel complex is still deeply incised but overflow deposits start to expand laterally as a result of the decreased confinement. By-pass facies here are well-developed, and are related to hydraulic jump processes. In the mid-fan setting, the channel complex widens and the sand/shale ratio decreases. Erosion at the channel base is less developed, whereas internal and external levees are well-developed. Spill-over lobes form the last stage of the channel complex infill. The internal geometry of the channel complexes is a result of a complex interaction between lateral confinement, by-pass and lateral migration processes.  相似文献   

9.
The Bengal Fan: morphology, geometry, stratigraphy, history and processes   总被引：2，自引：0，他引：2  
The Bengal Fan is the largest submarine fan in the world, with a length of about 3000 km, a width of about 1000 km and a maximum thickness of 16.5 km. It has been formed as a direct result of the India–Asia collision and uplift of the Himalayas and the Tibetan Plateau. It is currently supplied mainly by the confluent Ganges and Brahmaputra Rivers, with smaller contributions of sediment from several other large rivers in Bangladesh and India.The sedimentary section of the fan is subdivided by seismic stratigraphy by two unconformities which have been tentatively dated as upper Miocene and lower Eocene by long correlations from DSDP Leg 22 and ODP Legs 116 and 121. The upper Miocene unconformity is the time of onset of the diffuse plate edge or intraplate deformation in the southern or lower fan. The lower Eocene unconformity, a hiatus which increases in duration down the fan, is postulated to be the time of first deposition of the fan, starting at the base of the Bangladesh slope shortly after the initial India–Asia collision.The Quaternary of the upper fan comprises a section of enormous channel-levee complexes which were built on top of the preexisting fan surface during lowered sea level by very large turbidity currents. The Quaternary section of the upper fan can be subdivided by seismic stratigraphy into four subfans, which show lateral shifting as a function of the location of the submarine canyon supplying the turbidity currents and sediments. There was probably more than one active canyon at times during the Quaternary, but each one had only one active fan valley system and subfan at any given time. The fan currently has one submarine canyon source and one active fan valley system which extends the length of the active subfan. Since the Holocene rise in sea level, however, the head of the submarine canyon lies in a mid-shelf location, and the supply of sediment to the canyon and fan valley is greatly reduced from the huge supply which had existed during Pleistocene lowered sea level. Holocene turbidity currents are small and infrequent, and the active channel is partially filled in about the middle of the fan by deposition from these small turbidity currents.Channel migration within the fan valley system occurs by avulsion only in the upper fan and in the upper middle fan in the area of highest rates of deposition. Abandoned fan valleys are filled rapidly in the upper fan, but many open abandoned fan valleys are found on the lower fan. A sequence of time of activity of the important open channels is proposed, culminating with formation of the one currently active channel at about 12,000 years BP.  相似文献   

10.
The Bulgheria canyon-fan system in the eastern Tyrrhenian Sea displays well-developed, small-scale, fluvial-like features and has formed alongside the northern slope of the Sapri peri-Tyrrhenian basin. This study reveals, for the first time, the morphology and course of the present-day system as well as the buried elements based on a Digital Terrain Model and high-resolution seismic profiles interpretation. Two adjacent canyons (Infreschi and Luna) originate in the Cilento outer shelf at a short distance from each other and feed an intraslope basin fan through two main sub-parallel channels that run about 12 and 8 km, respectively. Channel and levee development seems to be controlled primarily by the local slope gradient and by Coriolis forces that induce a faster vertical growth of the right-side features, as is often observed in the Northern Hemisphere. Centrifugal forces, on the other hand, have induced episodic flow-stripping at the meander loops and bends, causing local destruction of the main channel levees rather than new levee growth at the outer bends. Overbank deposits are associated with overspill turbidite deposition in the mid fan where a topographic constraint occurs, whereas large-sediment, low-angle wave fields are mainly developed on the outer fan. Buried features and relict morphologies suggest that the Infreschi channel experienced at least two phases of re-incision since the final stages of the middle Pleistocene. Local re-adjustment of outer lobe growth due to channel avulsion and meander abandonment is possibly a consequence of relative base-level fluctuations. The sedimentary record of the mid and outer fan includes outrun mass wasting deposits from extensive failures of the Sapri slope. Indeed, a marked scar is present on the eastern side of the modern outer lobe that indicates the persistency of mass flow passages up to recent times. In addition to the environmental factors that are currently considered to cause canyon formation on the shelf margin, this study proposes the possibility that the head canyon branch close to the mainland was incised by massive and persistent underground freshwater flow from the adjacent aquifer when the sea-level was lower than at present.  相似文献   

11.
Sinuous deep-water channels display a wide range of geometries and internal architectures. Most modern examples have been documented from large passive-margin fans, supplied by major rivers carrying huge volumes of dominantly fine-grained sediments, e.g. Amazon, Mississippi, Zaire, Bengal, Indus, Rhône and Nile Fans. However, similar examples have also been documented from tectonically active margins, e.g. Magdalena Fan. In most cases, modern sinuous channels comprise the core element of laterally extensive channel–levee systems that often aggrade significantly above a low-gradient (0.1–0.5°) fan surface; individual channels may extend downslope for 100s of kilometres. Typically, channels are subject to frequent avulsions, with only one channel active at any given time. Present highstand conditions have ensured that activity in many modern sinuous channels is much reduced due to the disconnect between fluvial feeder system and canyon head, and some have even been heavily modified or destroyed by major mass-transport deposits. Exceptions include Zaire Fan, where recent activity has provided useful insights into flow processes.The majority of detailed studies relating to sinuous channels in the subsurface originate from offshore west Africa, where channels typically occur within incisional (confined) slope–channel complexes and often represent the latter stages of channel complex fill. Both dominantly aggradational and laterally migrating styles are recognised, while modern seafloor channels in this region display a similar incisional character, e.g. Cap Timiris Canyon. Morphologic expression of sinuosity is harder to recognise at outcrop, but there are an increasing number of documented examples of lateral accretion deposits, representing point-bar growth, that are currently thought to be diagnostic of sinuous channel forms. Sinuous channel lateral migration, and point-bar growth, appears to be driven by sustained flow of fluvial-sourced (probably hyperpycnal) low-density turbidity currents, although there does appear to be variation in energy conditions, with some outcrop examples showing switches in erosive and depositional phases of activity.Previous studies have frequently focussed on the obvious gross planform morphologic similarities between fluvial and deep-water sinuous channels, e.g. nature of sinuosity, presence of point bars and cut-off loops. However, we suggest here that the differences between submarine and river channels are of greater significance, in terms of geometry, flow processes, migration style and deposit character. Sinuous deep-water channels typically form initially by a moderate amount of incision followed by rapid initial bend growth (associated with bypass of sediment). Channels that show significant aggradation then reach a point where there is a near cessation of planform movement (ossification), and growth is dominated by vertical aggradation. A new process model is proposed for this developmental sequence that synthesises observations and experiments that were previously paradoxical.  相似文献   

12.
Much of the modern upper (proximal) Monterey fan is a channel–levee complex, the Upper Turbidite Sequence (UTS), that was deeply eroded after the channel breached a volcanic ridge to reach a deeper base level. Ages of sediment samples collected with the ALVIN submersible from the deepest outcrop within the channel–levee system, 390?m below the adjacent western levee crest, indicate that the UTS deposits accumulated at ≥1?m?ka?1 during the last 500?ka. Neogene and Early Pleistocene sediment accumulation on the fan prior to the UTS was much slower (<0.03?m?ka?1), and underlying turbidite systems(?) had substantially different morphologic expression(s).  相似文献   

13.
The Gulf of Cadiz: an unstable giant contouritic levee   总被引：1，自引：0，他引：1  
Recent multibeam bathymetry and acoustic imagery data provide a new understanding of the sedimentary system located in the Gulf of Cadiz which is under the influence of a strong current, the Mediterranean Outflow Water (MOW). When it comes out from the Strait of Gibraltar, the MOW is either channelled along major or secondary channels, or spills over a sedimentary levee. Frequent earthquakes and the constant current shearing generate widespread sediment deformation and instability of contourite deposits. Secondary channels can form by retrogression following an initial failure. At their mouth, sediment accumulates in the form of small sandy contourite lobes. These observations suggest that the Gulf of Cadiz system shares many similarities with channel–levee complexes formed by turbidity current activity. The main difference is that, in the Gulf of Cadiz, the main process is a strongly flowing saline current which locally interacts with gravity processes.  相似文献   

14.
Submarine channel levee systems form important hydrocarbon reservoirs in many deep marine settings and are often deposited within a structurally active setting. This study focuses on recent submarine channels that developed within a deepwater fold and thrust belt setting from the Levant Basin, eastern Mediterranean Sea. Compressional deformation within the study area is driven by the up-dip collapse of the Nile cone above the ductile Messinian Evaporites. Structures such as folds and strike slip faults exert a strong control on channel location and development over time. From this study four end-member submarine channel–structure interactions can be defined: Confinement, diversion, deflection and blocking. Each of these channel–structure interactions results in a distinct submarine channel morphology and pattern of development compared to unconfined channel levee systems. Each interaction can also be used to assess timing relationships between submarine channel development and deformation.  相似文献   

15.
The seismic geomorphology and seismic stratigraphy of a deep-marine channel-levee system is described. A moderate to high-sinuosity channel trending southeastward across the northeastern Gulf of Mexico basin floor, and associated depositional elements are well imaged using conventional 3D multi-channel seismic reflection data. Depositional elements described include channels, associated levees, a channel belt, avulsion channels, levee crevasses, frontal splays, sediment waves, and mass transport complexes. Distinguishing morphologic and stratigraphic characteristics of each depositional element are discussed. These deposits are presumed to be associated with repeated deep-marine turbidity flows and other mass transport processes.  相似文献   

16.
This paper reviews side-scan sonar, multi- and single-beam echo-sounder, and high-resolution seismic reflection data, and discusses the anatomy and patterns of the most recent sinuous channel avulsions in the Amazon, Zaire, Indus and Bengal Fans, all located along passive continental margins and all fed by major river systems. Channel patterns formed by fore- (seaward) or back- (landward) stepping avulsions are common in the western Amazon Fan and in the Northern and Axial Zaire Fan. However, channels in the Indus and Bengal Fans, and in the Southern Zaire Fan, appear to form radial patterns, with most of the main avulsions having occurred in relatively restricted areas (avulsion nodes).High degrees of development of channel instabilities or avulsion-threshold conditions (e.g. channel sinuosity increase and lengthening, channel thalweg aggradation, differential channel fill and decrease in channel relief, slumping and channel plugging, bank cohesion), and increased peak volumes and speeds of turbidity currents, determined where avulsions occurred in the fan channels. During the Late Quaternary intervals considered here, several global sea-level falls and rises occurred and these, along with climatic changes, are likely to have influenced sediment-gravity flows and may have thus timed many, if not all, significant avulsions. However, available data do not allow documentation of this timing in many cases.The main differences between fan areas with (1) fore-and back-stepping and (2) radial channel avulsion patterns are that, in the former case, fan gradients are steeper with frequent slope breaks, and channel thalweg aggradation occurs along much of the depositional profile. In the latter case, downdip of avulsion nodes, fan gradients are either flat or possibly have no breaks, and channels are incised below the fan surface with no thalweg aggradation in the middle and lower fan regions. These characteristics may have caused differences in avulsion-triggering turbidity flow volumes and avulsion threshold conditions that, in turn, may have resulted in different channel avulsion patterns.  相似文献   

17.
To date, facies architecture models of submarine channel–levees have largely been derived from seismic data, isolated core data and limited field studies. We report field observations of an Upper Cretaceous submarine channel–levee complex within the Rosario Formation, Baja California, Mexico, which provide high-resolution data of lithofacies and ichnofacies distribution, and levee depositional thickness decay along transects perpendicular to the channel axis. Within the levee, both sandstone thickness and the overall proportion of sandstone decrease according to a power law away from the channel axis. Spatial variation in sedimentary structures away from the channel axis is predictable and provides an important link to the depositional flow regime. In channel-proximal locations, structureless sands, parallel lamination, overturned ripples, and ripple cross-lamination (including climbing ripple cross-lamination) are common; in channel-distal localities starved ripples are abundant. Sandstone bed thickness generally increases up stratigraphy within the levee succession, which is interpreted to indicate increasing turbidity current magnitude and/or contemporaneous channel floor aggradation reducing relative levee relief. However, in the most channel-proximal location sandstone bed thickness decreases with height; combined with evidence from both facies and palaeocurrent analysis this allows the position of the levee crest to be inferred. The thickest beds occur at higher levels with increasing distance from the channel axis, using this evidence we present a model for levee growth and migration of the crest.Quantitative analysis of ichnofacies distribution reveals that traces typical of the Cruziana and Skolithos ichnofacies are superimposed over the ‘normal’ background Nereites ichnofacies, forming a ‘bioturbation front’ which is indicative of proximity to the channel. By analogy with modern canyons and channels, the association of Cruziana and Skolithos ichnofacies with the channel may be attributed to oxygen and nutrient enrichment and possible turbidity current transport of organisms responsible for these ichnofacies.  相似文献   

18.
Quantifying the characteristics of the turbidity currents that are responsible for the erosion, lateral migration and filling of submarine channels maybe useful for predicting the distribution of lithofacies in channel fill and levee reservoirs. This paper uses data from a well-studied submarine channel in Amazon Fan in an attempt to reconstruct the velocity, thickness, concentration, duration, recurrence rates and vertical structure of turbidity currents in this long sinuous channel. Estimates of flow conditions are derived from the morphology of the channels and the characteristics of the deposits within them. In particular, the availability of information on the sediment distribution with respect to the channel topography at the time of deposition allows for insights into the vertical structure of the flow, a key property that has been so far poorly understood. Integration of flow constraints from well and seismic data or from detailed analysis of outcrop with numerical flow models is a critical step toward a complete understanding of the flow and associated deposits. Turbidity currents in sinuous submarine channels, exemplified by Amazon Channel, are found to last for tens of hours and occur on a regular, quasi-annual basis. Model results suggest that these flows had, on average, velocities ranging from 2 to 4 m/s in the canyon/upper fan which decreased to 0.5–1 m/s in the lower fan, travelling in excess of 800 km. The model turbidity currents were subcritical over most of the channel length, indicating a low degree of water entrainment and low rate of deceleration down the channel. The formation of such long, sinuous channels is intrinsically associated with frequent, long-duration, subcritical turbidity currents carrying a silt-dominated sediment load.  相似文献   

19.
Several knickpoints have been identified along the present-day thalweg of a sinuous submarine channel–levee system (CLS) on the slope of the western Niger Delta using 3D seismic data. The knickpoints form as a result of gradient changes caused by the uplift of a thrust and fold belt orthogonal to the CLS. The channel gradient is lower locally upstream of folds causing turbidity currents within the channel to decelerate and deposit the coarsest sediment load. The basinward dipping fold limb causes local steepening of the gradient, which leads to increased flow velocity and turbulence within the turbidity currents. This enhances erosion at the base of the channel and leads to the formation of a knickpoint. If preserved, e.g., as a result of channel avulsion or abandonment, the deposits upstream of the knickpoints could constitute an important hydrocarbon reservoir element. They can, however, also be partially eroded by headward-migrating knickpoints, as the channel strives to regain its equilibrium profile, leaving remnant sand pockets preserved on channel margins. Although knickpoints are difficult to recognise from subsurface seismic or outcrop data, it is anticipated that they can form at any stage of the evolution of a channel–levee system and may be particularly important in controlling 3D channel architecture where channels intersect dynamically changing seabed bathymetry.  相似文献   

20.
The Ebro Fan System consists of en echelon channel-levee complexes, 50×20 km in area and 200-m thick. A few strong reflectors in a generally transparent seismic facies identify the sand-rich channel floors and levee crests. Numerous continuous acoustic reflectors characterize overbank turbidites and hemipelagites that blanket abandoned channel-levee complexes. The interlobe areas between channel complexes fill with homogeneous mud and sand from mass flow and overbank deposition; these exhibit a transparent seismic character. The steep continental rise and sediment “drainage” of Valencia Trough at the end of the channel-levee complexes prevent the development of distributary channels and midfan lobe deposits.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号