首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Recently, as oil exploitation has become focused on deepwater slope areas, more multi-channel high resolution 2D and 3D seismic data were acquired in the deepwater part of the Qiongdongnan Basin, northern South China Sea. Based on 3D seismic data and coherence time slice, RMS and 3D visualization, a series of deepwater channels were recognized on the slope that probably developed in the late Quaternary period. These channels trend SW–NE to W–E and show bifurcations, levees, meander loops and avulsions. High Amplitude Reflections (HARs), typical for channel–levee complexes, are of only minor importance and were observed in one of the channel systems. Most of the detected channels are characterized by low-amplitude reflections, and so are different from the typical coarse-grained turbidite channels that had been discovered worldwide. The absence of well data in the study area made it difficult to determine the age and lithology of these channels. Using a neighboring drill hole and published data about such depositional systems worldwide, the lithology of these channels is likely to be dominated by mudstones with interbedded thin sandstones. These channels are formed by turbidity currents originated from the little scale mountain river of mid-Vietnam in SW direction and were probably accompanied by a relative sea level drop in the last glacial age. These channels discovered on the northern South China Sea slope are likely to be fine-grained, mud-dominant and low N:G deposits in a deepwater paleogeographic setting.  相似文献   

2.
 Much of the modern upper (proximal) Monterey fan is a channel–levee complex, the Upper Turbidite Sequence (UTS), that was deeply eroded after the channel breached a volcanic ridge to reach a deeper base level. Ages of sediment samples collected with the ALVIN submersible from the deepest outcrop within the channel–levee system, 390 m below the adjacent western levee crest, indicate that the UTS deposits accumulated at ≥1 m ka-1 during the last 500 ka. Neogene and Early Pleistocene sediment accumulation on the fan prior to the UTS was much slower (<0.03 m ka-1), and underlying turbidite systems(?) had substantially different morphologic expression(s). Received: 10 February 1998 / Revision received: 6 July 1998  相似文献   

3.
Submarine channel-levee systems commonly develop in structurally active deepwater settings. Despite their widespread development in such settings, only recently have researchers begun to address the response of channel-levee system evolution to deformation. Key factors which govern channel evolution and morphological development are relative rates of deformation and channel deposition and erosion, and also the number and scale of deformational structures, relative to the scale of the submarine channel. Submarine channel-structure interactions can be split into four end-members: deflection, blocking, diversion and confinement. Where deformation is coeval with channel development, an increase in the relative rate of uplift versus deposition and erosion causes a transition from channel deflection to blocking. Diversion and confinement are linked by the number, scale and orientation of structures relative to the channel flow path. Increasing the number of structures and their scale typically results in channel confinement. Underlying all of these individual controls is the distribution of local accommodation, which is determined by specific structural style. This distribution of accommodation over relatively small (<10 km) length scales strongly affects local channel development in order to attain the equilibrium profile. Knowledge of these controls on submarine channel development can increase our understanding of how these deepwater sedimentary systems evolve and distribute sediment across deforming submarine slopes. Understanding the factors governing spatial variations in channel morphology may also be applied when exploring for hydrocarbon reservoirs in structurally active deepwater settings.  相似文献   

4.
To date, facies architecture models of submarine channel–levees have largely been derived from seismic data, isolated core data and limited field studies. We report field observations of an Upper Cretaceous submarine channel–levee complex within the Rosario Formation, Baja California, Mexico, which provide high-resolution data of lithofacies and ichnofacies distribution, and levee depositional thickness decay along transects perpendicular to the channel axis. Within the levee, both sandstone thickness and the overall proportion of sandstone decrease according to a power law away from the channel axis. Spatial variation in sedimentary structures away from the channel axis is predictable and provides an important link to the depositional flow regime. In channel-proximal locations, structureless sands, parallel lamination, overturned ripples, and ripple cross-lamination (including climbing ripple cross-lamination) are common; in channel-distal localities starved ripples are abundant. Sandstone bed thickness generally increases up stratigraphy within the levee succession, which is interpreted to indicate increasing turbidity current magnitude and/or contemporaneous channel floor aggradation reducing relative levee relief. However, in the most channel-proximal location sandstone bed thickness decreases with height; combined with evidence from both facies and palaeocurrent analysis this allows the position of the levee crest to be inferred. The thickest beds occur at higher levels with increasing distance from the channel axis, using this evidence we present a model for levee growth and migration of the crest.Quantitative analysis of ichnofacies distribution reveals that traces typical of the Cruziana and Skolithos ichnofacies are superimposed over the ‘normal’ background Nereites ichnofacies, forming a ‘bioturbation front’ which is indicative of proximity to the channel. By analogy with modern canyons and channels, the association of Cruziana and Skolithos ichnofacies with the channel may be attributed to oxygen and nutrient enrichment and possible turbidity current transport of organisms responsible for these ichnofacies.  相似文献   

5.
Channel-levee systems are frequently interpreted as having a long history of cut-and-fill by channel-shaped features of different scales. Results from a simple geometric model based on a centerline migration algorithm combined with a vertical channel trajectory show that an incising-to-aggrading trajectory of a single channel can produce realistic morphologies similar to systems observed on the seafloor and subsurface, including features such as a basal erosional surface, coeval inner and outer levees, internal erosional boundaries, and terraces draped by inner levee deposits. Channel migration results in composite erosional surfaces that are distinct from topographic surfaces, and their formation does not require larger than usual erosional flows. Many submarine channels interpreted as underfit were probably carved by flows similar to the ones that eroded and deposited the entire channel system. We suggest that the features of most submarine channel-levee systems do not require large temporal variations in flow magnitude but can be explained by a simpler model whereby incision, migration and aggradation of a single channel form over time results in an apparently complex system.  相似文献   

6.
Several knickpoints have been identified along the present-day thalweg of a sinuous submarine channel–levee system (CLS) on the slope of the western Niger Delta using 3D seismic data. The knickpoints form as a result of gradient changes caused by the uplift of a thrust and fold belt orthogonal to the CLS. The channel gradient is lower locally upstream of folds causing turbidity currents within the channel to decelerate and deposit the coarsest sediment load. The basinward dipping fold limb causes local steepening of the gradient, which leads to increased flow velocity and turbulence within the turbidity currents. This enhances erosion at the base of the channel and leads to the formation of a knickpoint. If preserved, e.g., as a result of channel avulsion or abandonment, the deposits upstream of the knickpoints could constitute an important hydrocarbon reservoir element. They can, however, also be partially eroded by headward-migrating knickpoints, as the channel strives to regain its equilibrium profile, leaving remnant sand pockets preserved on channel margins. Although knickpoints are difficult to recognise from subsurface seismic or outcrop data, it is anticipated that they can form at any stage of the evolution of a channel–levee system and may be particularly important in controlling 3D channel architecture where channels intersect dynamically changing seabed bathymetry.  相似文献   

7.
An efficient solution for the multivariable submarine control design at low-depth conditions under the influence of wave disturbances is presented. The analysis and control design process is carried out under the framework of individual channel analysis and design (ICAD), which is based on the multivariable structure function (MSF). Classical frequency-domain control techniques based on Bode and Nyquist plots are used. Robustness is stated in terms of gain and phase margins. The closed-loop system includes low-order diagonal controllers facilitating its implementation, assessment, and tuning. ICAD discloses new physical insights of the submarine dynamical behaviour. Previous designs based on diagonal controllers consider the input–output channels defined by pairing the bow hydroplane angle with the depth and the stern hydroplane angle with the pitch angle. The alternative input–output pairing leads to unstable closed-loop systems. This phenomenon is associated with hydroplane reverse control. Here it is shown that MSF-based diagonal controllers can be applied effectively for both sets of channel configurations. Emphasis is placed on satisfying design specifications aiming at maintaining the depth low. The solution presented is more feasible and clearer to apply in practice than those so far reported in the literature.  相似文献   

8.
Two scales of levee confinement are commonly recognised from submarine channel-levee systems on the seafloor and in the subsurface. Large-scale external levees bound the entire system whilst smaller-scale internal levees bound individual thalweg channels within the channel-belt. Although thin beds are commonly identified in core and well logs, their origin, and consequently their stratigraphic significance is currently poorly understood. This knowledge gap stems, in part, from the lack of unambiguously identified outcrop analogues of channel-levees, and in particular the lack of identifiable internal and external levees. Here we report from two exhumed channel-levee systems where both scales of confinement can be recognised: the Rosario Fm. of Baja California, and the Fort Brown Fm. of South Africa. A suite of characteristic sedimentary features are recognised from internal and external levees respectively: internal levees are characterised by structures indicative of complexity in the waxing-waning style of overspill, interactions with topography and flow magnitude variability; in contrast, external levees are characterised by structures indicative of simple surge-like waning flows, relatively uniform flow directions, laterally extensive beds, and a lack of erosive events. Using these observations, together with published literature, we propose a simple nomenclatural scheme for levee sub-environments, and criteria to differentiate between levee sub-environments in core or outcrop.  相似文献   

9.
We present a series of experiments that investigate the morphology of sediment deposits within sinuous submarine channels of different sinuosity (S = 1.14–1.94) and planform (symmetric and asymmetric bends), generated by bedload-dominated turbidity current flows. Flows were generated by releasing dense saline gravity currents over a mobile sediment bed through pre-formed sinuous channels. Flows had a basal-outwards helicity and produced a characteristic bed morphology with point bars downstream of the bend apex at the inside of bends and scour at the outside of bends. An increasing loss of fluid through overspill with increasing channel sinuosity results in a decreasing magnitude of cross-stream velocity downstream, a decreasing amount of erosion and deposition, and decreasing transverse slopes of in-channel deposits. Basal fluid from within the channel is transported over the outer-levee at bends, implying that proximal outer-bend levee deposits will have similar sediment composition to that within the channel. More deposition of coarse material might be expected on levees and in overbank regions close to higher amplitude bends. No simple relationship was observed between superelevation and sinuosity, probably due to changes in the relative influences of downstream velocity and bend curvature on centrifugal force and inertial run-up. In the channel with the tightest initial bend curvature, overspill fluid from Bend 1 re-entered the channel at Bend 2, dominating flow characteristics and disrupting the basal-outwards helicity observed in the other channels. Higher sinuosity channels and those with shallow regional and levee slopes are thus more likely to have a higher proportion of anomalous flow and sedimentation patterns due to the influence of overspill fluid re-entry into the channel. The results of this investigation are combined with published observations to enable the synthesis of a new model for sedimentation in sinuous submarine channels.  相似文献   

10.
A high-resolution bathymetric and seismic study of sinuous midfan channels on the Amazon Fan shows that some common elements of seismic profiles across the channel/levee system may be side echoes (sideswipe) from reflective, coarse channel-floor sediments Which lie to the side of the ship track. This includes portions of a dipping zone of high-amplitude reflectors beneath the channel. If these strong echoes are side echoes rather than buried coarse sediments, there may be less coarse material present within the midfan channel/levee systems than predicted, and channel evolution is still poorly resolved. Side echoes may be common in other areas of complex deep-sea morphology.  相似文献   

11.
Quantifying the characteristics of the turbidity currents that are responsible for the erosion, lateral migration and filling of submarine channels maybe useful for predicting the distribution of lithofacies in channel fill and levee reservoirs. This paper uses data from a well-studied submarine channel in Amazon Fan in an attempt to reconstruct the velocity, thickness, concentration, duration, recurrence rates and vertical structure of turbidity currents in this long sinuous channel. Estimates of flow conditions are derived from the morphology of the channels and the characteristics of the deposits within them. In particular, the availability of information on the sediment distribution with respect to the channel topography at the time of deposition allows for insights into the vertical structure of the flow, a key property that has been so far poorly understood. Integration of flow constraints from well and seismic data or from detailed analysis of outcrop with numerical flow models is a critical step toward a complete understanding of the flow and associated deposits. Turbidity currents in sinuous submarine channels, exemplified by Amazon Channel, are found to last for tens of hours and occur on a regular, quasi-annual basis. Model results suggest that these flows had, on average, velocities ranging from 2 to 4 m/s in the canyon/upper fan which decreased to 0.5–1 m/s in the lower fan, travelling in excess of 800 km. The model turbidity currents were subcritical over most of the channel length, indicating a low degree of water entrainment and low rate of deceleration down the channel. The formation of such long, sinuous channels is intrinsically associated with frequent, long-duration, subcritical turbidity currents carrying a silt-dominated sediment load.  相似文献   

12.
The Amazon Deep-Sea Fan began to form in the Early Miocene and is characterized by a highly meandering distributary channel system. On the middle fan, these leveed channels coalesce to form two broad levee complexes. Older, now buried levee complexes are also observed within the fan. These levee complexes grow through channel migration, branching, and avulsion. Probably only one or two channels are active at any given time. Sediments reach the fan only during glacio-eustatic low stands of sea level. Coarse sediments largely by-pass the upper and middle fan via the channels and are deposited on the lower fan. Margin setting represents fan and/or source area  相似文献   

13.
High-resolution multichannel 2-D and 3-D seismic data, primarily from upper fan reaches of near-seafloor channel-levee systems on the Niger Delta slope and in the Arabian Sea, reveal a high level of detail and architectural complexity. Several architectural elements are common to each system examined in this study. They include inner levees, outer levees, erosional fairways, channel-axis deposits, rotational slumps blocks, and mass transport deposits. Although the scale of individual systems varies significantly, similarities in first-order architectural elements and their configurations suggest that common depositional processes are involved regardless of scale differences.Most of the channel-levee systems examined in this study are characterized by a basal erosional fairway that is bordered by outer levees of varying thickness. Together these elements define the base and margins of the channel-belt, where channel-axis deposits and inner levees are the dominant architectural elements. Vertical, sub-vertical, and lateral stacking patterns of sinuous and/or meandering channels create seismic facies that range from narrow to wide zones of high amplitude reflections (HARs) with chaotic to continuous and shingled to horizontal reflections. Some HARs appear as isolated or stacked asymmetric to symmetric u- and v-shaped reflections, referred to here as channel-forms. Channel-belts evolve within the confines of the scalloped erosional fairway walls (flanked by outer levee), and are similar in morphology to meander-belts in fluvial systems, but commonly have a greater component of vertical aggradation. Detailed study of one particular channel-levee system on the Niger Delta slope shows a period of incision followed by three distinct phases of channel development during its aggradational history. Each fill phase corresponds to a different channel stacking architecture, planform geometry, and nature of terrace development, with important implications for reservoir architecture. In some cases, multiple phases of inner levee growth are observed, each intimately linked to the channel migration and aggradation history. Channel sinuosity evolves dynamically, with some meander loops undergoing periods of accelerated meander growth at the same time that others show little lateral migration.  相似文献   

14.
Sagami Bay is a deep-water foreland basin with an average sedimentary rate of approximately 0.1 g/cm2/year. It is an appropriate area to study for better understanding of sedimentary processes in a setting with a high sedimentation rate. Seven multiple core samples, 30-50 cm thick, were obtained from Sagami Bay. Four of the core samples were taken from the Tokyo submarine fan system (Tokyo canyon floor, Tokyo fan valley and its levee, the distal fan margin). Two samples were obtained from the Sakawa fan delta and the adjacent topographic high. The remaining one was from an escarpment of the Sagami submarine fault. Variations in chemical composition can be recognized at every coring site. They show two different sediment sources: the sediments of the Tokyo submarine fan system and those from Sakawa fan delta. Further, there are differences in chemical composition between canyon floor and levees even within the Tokyo submarine fan system. The results suggest that the sedimentary process is strongly controlled not by vertical particle settling but by a hyperpycnal flow process. The proxies obtained from the core samples do not reflect conditions in the water column immediately overlying the sea floor. Rather, they are controlled by conditions on the adjacent continental shelf or/and shallow basins, which are the areas of primary accumulation.  相似文献   

15.
The design of submarines has continually evolved to improve survivability. Explosions may induce local damage as well as global collapse to a submarine. Therefore, it is important to realistically estimate the possible damage conditions due to underwater explosions in the design stage. The present study applied the Arbitrary Lagrangian–Eulerian (ALE) technique, a fluid–structure interaction approach, to simulate an underwater explosion and investigate the survival capability of a damaged submarine liquefied oxygen tank. The Lagrangian–Eulerian coupling algorithm, the equations of state for explosives and seawater, and the simple calculation method for explosive loading were also reviewed. It is shown that underwater explosion analysis using the ALE technique can accurately evaluate structural damage after attack. This procedure could be applied quantitatively to real structural design.  相似文献   

16.
Much of the modern upper (proximal) Monterey fan is a channel–levee complex, the Upper Turbidite Sequence (UTS), that was deeply eroded after the channel breached a volcanic ridge to reach a deeper base level. Ages of sediment samples collected with the ALVIN submersible from the deepest outcrop within the channel–levee system, 390?m below the adjacent western levee crest, indicate that the UTS deposits accumulated at ≥1?m?ka?1 during the last 500?ka. Neogene and Early Pleistocene sediment accumulation on the fan prior to the UTS was much slower (<0.03?m?ka?1), and underlying turbidite systems(?) had substantially different morphologic expression(s).  相似文献   

17.
An erosional channel and upslope-climbing sediment waves have been observed in Ytre Orkdalsfjorden and the marine fjord branch Gaulosen off the mouth of Gaula River in Trondheimsfjorden, central Norway. The submarine channel (up to 100–150 m wide and 12 m deep) is interpreted as the pathway of hyperpycnal flows and turbidity currents. It can be traced for 20 km on the seafloor from the mouth of Gaula River down to 500 m of water depth. Based on swath bathymetry and seismic data, the sediment waves are shown to have an accumulated thickness of 50–60 m. They are up to 8 m high, have up to 1-km-long crests, and wavelengths of 100–900 m. The sediment waves are attributed to hyperpycnal flows and turbidity currents overflowing the banks of the channel. Many of the sediment waves were instigated by pre-existing topography created by mass movements since early Holocene times.  相似文献   

18.
This paper presents the review and studies at various levels of problems concerning the authors’ previous research on the dynamics of vehicle–deck interactions. The various levels of study include the dynamic structural behavior of vehicle–deck systems, vehicle vibrations, damping effects of vehicles on structural systems, dynamic interactions between tire and deck surface, and vehicle securing on decks during ship motions, etc. The study includes analytical, numerical and experimental analysis. Practical problems encountered by Ro–Ro ship designers are addressed by discussing those analysis. It is shown that influences from the dynamics of vehicle–deck interactions are relevant to a number of aspects of issues, such as the excitation frequency range, how detailed information of the structural system response is required, the structure characteristics, and positions and orientations of vehicles on decks, etc. The study contributes to the knowledge for the naval architect and vehicle engineer on how significant the dynamics of vehicle–deck interactions are when dealing with relevant problems.  相似文献   

19.
The Bengal Fan: morphology, geometry, stratigraphy, history and processes   总被引：2，自引：0，他引：2  
The Bengal Fan is the largest submarine fan in the world, with a length of about 3000 km, a width of about 1000 km and a maximum thickness of 16.5 km. It has been formed as a direct result of the India–Asia collision and uplift of the Himalayas and the Tibetan Plateau. It is currently supplied mainly by the confluent Ganges and Brahmaputra Rivers, with smaller contributions of sediment from several other large rivers in Bangladesh and India.The sedimentary section of the fan is subdivided by seismic stratigraphy by two unconformities which have been tentatively dated as upper Miocene and lower Eocene by long correlations from DSDP Leg 22 and ODP Legs 116 and 121. The upper Miocene unconformity is the time of onset of the diffuse plate edge or intraplate deformation in the southern or lower fan. The lower Eocene unconformity, a hiatus which increases in duration down the fan, is postulated to be the time of first deposition of the fan, starting at the base of the Bangladesh slope shortly after the initial India–Asia collision.The Quaternary of the upper fan comprises a section of enormous channel-levee complexes which were built on top of the preexisting fan surface during lowered sea level by very large turbidity currents. The Quaternary section of the upper fan can be subdivided by seismic stratigraphy into four subfans, which show lateral shifting as a function of the location of the submarine canyon supplying the turbidity currents and sediments. There was probably more than one active canyon at times during the Quaternary, but each one had only one active fan valley system and subfan at any given time. The fan currently has one submarine canyon source and one active fan valley system which extends the length of the active subfan. Since the Holocene rise in sea level, however, the head of the submarine canyon lies in a mid-shelf location, and the supply of sediment to the canyon and fan valley is greatly reduced from the huge supply which had existed during Pleistocene lowered sea level. Holocene turbidity currents are small and infrequent, and the active channel is partially filled in about the middle of the fan by deposition from these small turbidity currents.Channel migration within the fan valley system occurs by avulsion only in the upper fan and in the upper middle fan in the area of highest rates of deposition. Abandoned fan valleys are filled rapidly in the upper fan, but many open abandoned fan valleys are found on the lower fan. A sequence of time of activity of the important open channels is proposed, culminating with formation of the one currently active channel at about 12,000 years BP.  相似文献   

20.
Swath bathymetry data and seismic reflection profiles have been used to investigate details of the deformation pattern in the area offshore southwestern Taiwan where the Luzon subduction complex encroaches on the passive Chinese continental margin. Distinctive fold-and-thrust structures of the convergent zone and horst-and-graben structures of the passive margin are separated by a deformation front that extends NNW-ward from the eastern edge of the Manila Trench to the foot of the continental slope. This deformation front gradually turns into a NNE–SSW trending direction across the continental slope and the Kaoping Shelf, and connects to the frontal thrusts of the mountain belt on land Taiwan. However, the complex Penghu submarine canyon system blurs the exact location of the deformation front and nature of many morphotectonic features offshore SW Taiwan. We suggest that the deformation front offshore SW Taiwan does not appear as a simple structural line, but is characterized by a series of N–S trending folds and thrusts that terminate sequentially in an en-echelon pattern across the passive Chinese continental slope. A number of NE–SW trending lineaments cut across the fold-and-thrust structures of the frontal accretionary wedge and exhibit prominent dextral displacement indicative of the lateral expulsion of SW Taiwan. One of the prominent lineaments, named the Yung-An lineament, forms the southeastern boundary of the upper part of the Penghu submarine canyon, and has conspicuous influence over the drainage pattern of the canyon  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号