共查询到20条相似文献，搜索用时 890 毫秒
1.
The dynamics of a damaged ship in waves is a complex phenomenon regarding fluid and structure interactions. Flooded water motions in the damaged compartment could be influenced by decks, obstructions and obstacles in the compartment. This becomes particularly relevant in case of flooding in the engine room that is usually characterized by the presence of large objects such as engines and machineries. In such cases the possibility to better understand the behavior of a damaged ship, influenced by the fluid and structure interactions, could provide novel outcomes and thus enhance the damaged ship safety.In this paper an experimental campaign is conducted on a passenger ferry hull. The effects of obstacles in the engine room compartment, such as decks and engines, on ship roll responses, are studied. Roll decay in still water and steady roll responses in beam regular waves at zero speed are measured for the empty compartment and for the compartment with obstructions, as defined above.The main outcomes from the conducted experiments disclose a mitigation of the resonant behavior of the coupled system, ship with damaged compartment, by having engine shapes occupying the flooded engine room. Moreover it is possible to observe how the resonant frequency of the ship modifies having a more realistic arrangement of damaged compartment and how motion RAOs and roll decay characteristics modify accordingly. 相似文献
2.
The dynamic behavior of a towed cable system that results from the tow ship changing course from a straight-tow trajectory to one involving steady circular turning at a constant radius is examined. For large-radius ship turns, the vehicle trajectory and vehicle depth assumed, monotonically and exponentially, the large-radius steady-state turning solution of Chapman [Chapman, D.A., 1984. The towed cable behavior during ship turning manoeuvers. Ocean Engineering 11, 327–361]. For small-radius ship turns, the vehicle trajectory initially followed a corkscrew pattern with the vehicle depth oscillating about and eventually decaying to the steady-state turning solution of Chapman (1984). The change between monotonic and oscillatory behavior in the time history of the vehicle depth was well defined and offered an alternate measure to Chapman's (1984) critical radius for the transition point between large-radius and small-radius behavior. For steady circular turning in the presence of current, there was no longer a steady-state turning solution. Instead, the vehicle depth oscillated with amplitude that was a function of the ship-turning radius and the ship speed. The dynamics of a single 360° turn and a 180° U-turn are discussed in terms of the transients of the steady turning maneuver. For a single 360° large-radius ship turn, the behavior was marked by the vehicle dropping to the steady-state turning depth predicted by Chapman (1984) and then rising back to the initial, straight-tow equilibrium depth once the turn was completed. For small ship-turning radius, the vehicle dropped to a depth corresponding to the first trough of the oscillatory time series of the steady turning maneuver before returning to the straight-tow equilibrium depth once the turn was completed. For some ship-turning radii, this resulted in a maximum vehicle depth that was greater than the steady-state turning depth. For a 180° turn and ship-turning radius less than the length of the tow cable, the vehicle never reached the steady-state turning depth. 相似文献
3.
A robust control scheme is presented for controlling systems with time delays. The scheme is based on the Smith controller and the LQG/LTR (linear quadratic Gaussian/loop transfer recovery) methodology. The methodology is applicable to underwater vehicle systems that exhibit time delays, including tethered vehicles that are positioned through the movements of a surface ship and autonomous vehicles that are controlled through an acoustic link. An example, using full-scale data from the tethered vehicle ARGO, demonstrates the developments 相似文献
4.
Autonomous vehicles are being developed to replace the conventional, manned surface vehicles that tow mine hunting towed platforms. While a wide body of work exists that describes numerical models of towed systems, they usually include relatively simple models of the towed bodies and neglect the dynamics of the towing vehicle. For systems in which the mass of the towing vehicle is comparable to that of the towed vehicle, it becomes important to consider the dynamics of both vehicles. In this work, we describe the development of a numerical model that accurately captures the dynamics of these new mine hunting systems. We use a lumped mass approximation for the towcable and couple this model to non-linear numerical models of an autonomous surface vehicle and an actively controlled towfish. Within the dynamics models of the two vehicles, we include non-linear controllers to allow accurate maneuvering of the towed system. 相似文献
5.
Time-domain numerical simulation of ocean cable structures 总被引：2，自引：0，他引：2
This paper describes the numerical features of WHOI Cable, a computer program for analyzing the statics and dynamics of oceanographic cable structures. The governing equations include the effects of geometric and material nonlinearities, bending stiffness for seamless modeling of slack cables, and a model for the interaction of cable segments with the sea floor. The program uses the generalized-α time integration algorithm, adaptive time stepping, and adaptive spatial gridding to produce accurate, stable solutions for dynamic problems. The nonlinear solver uses adaptive relaxation to improve robustness for both static and dynamic problems. The program solves surface and subsurface single-point mooring problems, multi-leg and branched array systems, and towing and drifting problems. User specified forcing can include waves, currents, wind, and ship speed. 相似文献
6.
In this study, a dynamic modeling method for foil-like underwater vehicles is introduced and experimentally verified in different sea tests of the Hadal ARV. The dumping force of a foil-like underwater vehicle is sensitive to swing motion. Some foil-like underwater vehicles swing periodically when performing a free-fall dive task in experiments. Models using conventional modeling methods yield solutions with asymptotic stability, which cannot simulate the self-sustained swing motion. By improving the ridge regression optimization algorithm, a grey-box modeling method based on 378 viscous drag coefficients using the Taylor series expansion is proposed in this study. The method is optimized for over-fitting and convergence problems caused by large parameter matrices. Instead of the PMM test data, the unsteady computational fluid dynamics calculation results are used in modeling. The obtained model can better simulate the swing motion of the underwater vehicle. Simulation and experimental results show a good consistency in free-fall tests during sea trials, as well as a prediction of the dive speed in the swing state. 相似文献
7.
海底底质的物理力学参数不同于陆地土壤,其极低的抗剪强度和承压强度对深海采矿车的行走性能提出高要求。分析基于车辆地面力学理论,开展了底质土力学特性试验研究,建立了深海底质力学模型。根据深海重载作业采矿车样机结构参数,在大型动力学仿真软件Recurdyn中建立了仿真模型。通过直线行走多体动力学仿真与直线行走海试试验的对比,验证了仿真模型的准确性。在此基础上开展了采矿车样机在深海软底质上的多种行走工况动力学仿真,分析与评价其行走性能。结果表明,采矿车样机可以顺利完成转弯、爬坡、越障等基本功能。该研究成果可为深海采矿车海底行走性能评估提供理论参考,为深海采矿车和软底质的相互作用力学研究提供借鉴。 相似文献
8.
This study contributes to solving the problem of how to derive a simplistic model feasible for describing dynamics of different types of ships for maneuvering simulation employed to study maritime traffic and furthermore to provide ship models for simulation-based engineering test-beds. The problem is first addressed with the modification and simplification of a complicated and nonlinearly coupling vectorial representation in 6 degrees of freedom (DOF) to a 3 DOF model in a simple form for simultaneously capturing surge motions and steering motions based on several pieces of reasonable assumptions. The created simple dynamic model is aiming to be useful for different types of ships only with minor modifications on the experiment setup. Another issue concerning the proposed problem is the estimation of parameters in the model through a suitable technique, which is investigated by using the system identification in combination with full-scale ship trail tests, e.g., standard zigzag maneuvers. To improve the global optimization ability of support vector regression algorithm (SVR) based identification method, the artificial bee colony algorithm (ABC) presenting superior optimization performance with the advantage of few control parameters is used to optimize and assign the particular settings for structural parameters of SVR. Afterward, the simulation study on identifying a simplified dynamic model for a large container ship verifies the effectiveness of the optimized identification method at the same time inspires special considerations on further simplification of the initially simplified dynamic model. Finally, the further simplified dynamic model is validated through not only the simulation study on a container ship but also the experimental study on an unmanned surface vessel so-called I-Nav-II vessel. Either simulation study results or experimental study results demonstrate a valid model in a simple form for describing the dynamics of different types’ ships and also validate the performance of the proposed parameter estimation method. 相似文献
9.
The use of wavelet transforms is explored to investigate the nonlinear dynamical characteristics of ship roll and coupled heave-roll motion. The harmonic character, double period character and chaotic character are observed via a time–frequency window of the wavelet transform. Typical wave parameters in different stability regions are considered. Features such as restoring rolling, divergence rolling, steady state and chaotic responses of ship roll are obtained as well. The investigation in this paper not only highlights the feasibility of using wavelet transforms in the analysis of nonlinear dynamic characteristics of ship rolling in waves, but also shows how it could enhance the analysis abilities. 相似文献
10.
An exact solution for the title problem is obtained in closed form fashion in the case of a Bernoulli–Euler beam. It is assumed that the exciting force is applied to the mass which is elastically mounted on the beam. The mathematical model constitutes a first order approximation to a motor or engine elastically mounted on a structural element. The operation of the machine generates a transverse, sinusoidally varying force. The problem is of basic interest in mechanical, naval and ocean engineering systems from the point of view of the determination of dynamic displacements and stresses; sound radiation calculations, etc. The present problem arose in connection with the mounting of an engine on a structural beam in a small naval vessel and when excessive vibrational level was noted. This study was undertaken in order to understand the physical problem and to correct the mechanical situation 相似文献
11.
Sandwich panel is commonly used in ship and marine engineering equipment, such as side structure and superstructure deck of a ship, which is of good anti-explosion performance. This paper addresses a study on the dynamic response of the U-typed sandwich panel under explosion load through the numerical simulation and theoretical methods. Based on the orthotropic plate theory, the U-typed sandwich panel is simplified and transformed into a single degree of freedom (SDOF) spring system, the equivalent motion equation of the SDOF system and the expression of triangular explosion load function are established based on the SDOF theory, and the maximum response spectrum of the SDOF system is obtained. Then, the response of the equivalent SDOF system of the U-typed sandwich panel under explosion load is analyzed, and the theoretical results match well with the numerical simulation results, which verifies the accuracy of the theoretical method proposed in this paper. The theoretical method proposed in this paper could have good engineering applications for the structural anti-explosion design, and provide a reference for the evaluation of the anti-explosion performance of ship and offshore platform structures.
相似文献12.
We have developed a simple boom for use in measuring meteorological variables from a ship. The main structural member of the boom, a triangular communications tower with rollers attached along its bottom side, is deployed horizontally from a long, flat deck, such as a helicopter deck, and will support a 100-kg payload at its outboard end. The boom is easy to deploy, requires minimal ship modifications, and provides ready access to the instruments mounted on it. And because it is designed for use with the ship crosswind, oceanographic work can go on at the same time as the air-sea interaction measurements.We describe our use of the boom on the Mikhail Somov during a cruise into the Antarctic sea ice and present some representative measurements made with instruments mounted on it. Theory, experiment, and our data all imply that instruments deployed windward from a rear helicopter deck can reach air undisturbed by the ship. Such an instrument site has clear advantages over the more customary mast, bow, or buoy locations. 相似文献
13.
An experimental set-up is developed and proved to be effective for laboratory study of an underwater towed system. The experimental technique gives a practical method for monitoring the kinematic and dynamic performance of an underwater towed system in a ship towing tank. Both the theoretical and experimental results in the investigation indicate that the hydrodynamic response of a towed vehicle to the wave induced motion of a towing ship can be significantly reduced by applying a two-part tow method. A comparison of the numerical and experimental results in the investigation demonstrates that the numerical simulation results are close to the experimental data, overall agreement between experimental and theoretical results is satisfactory. The results qualitatively verify the mathematical model of a two-part underwater towed system proposed by Wu and Chwang [Wu, J., Chwang, A.T., 2000. A hydrodynamic model of a two-part underwater towed system. Ocean Engineering 27 (5), 455–472]. 相似文献
14.
A neural net controller for underwater robotic vehicles 总被引：2，自引：0，他引：2
Results of a study on the application of neural networks to the control system of underwater robotic vehicles (URVs) are presented. The robustness of the control system with respect to nonlinear dynamic behavior and parameter uncertainties is investigated by computer simulation. The results show the feasibility of using unpredictable changes in the dynamics of the vehicle and its environment 相似文献
15.
J.-G. Dessureault 《Ocean Engineering》1976,3(2):99-111
“Batfish” is a streamlined vehicle developed to house fast-responding oceanographic sensors. It is towed behind a ship or small vessel and its depth is controlled from the vessel by a manually or automatically produced command signal. Variable-angle wings permit the vehicle to be lowered and a novel control surface, which eliminates the need for heavy ballast, assures lateral stability. There are two models: the standard and the wide-wing Batfish. The standard Batfish has collected temperature and conductivity data at depths of up to 200 m when towed at 10–25 km/hr, and the wide-wing Batfish at depths to 400 m when towed at 10–16km/hr. 相似文献
16.
Most of the large scaled casualties are caused by loss of structural strength and stability due to the progressive flooding and the effect of waves and wind. To prevent foundering and structural failure, it is necessary to predict the motion of the damaged ship in waves.This paper describes the motion of damaged ship in waves resulting from a theoretical and experimental study. A time domain theoretical model, which can be applied to any type of ship or arrangement, for the prediction of damaged ship motion and accidental flooding has been developed considering the effects of flooding of compartments. To evaluate the accuracy of the model, model tests are carried out in ship motion basin for three different damaged conditions: engine room bottom damage, side shell damage and bow visor damage of Ro–Ro ship in regular and irregular waves with different wave heights and directions. 相似文献
17.
Thomas W. TreakleIII Dean T. Mook Stergios I. Liapis Ali H. Nayfeh 《Ocean Engineering》2000,27(12):1171
A method to evaluate the use of actively controlled moving weights on board ships to reduce roll motion is developed. The weights can simulate in principle anti-roll-tank systems, or they can be considered a possible anti-roll device in their own right. The ship, the moving weight, and the control device are considered components of a single dynamic system. The full eight-degree-of-freedom set of coupled governing equations for the complete dynamic system is derived. And a three-degree-of-freedom non-linear approximation for the roll motion only (MOTSIM) is derived from these eight equations. The reduced set of equations is used to determine the influence of various parameters and to evaluate control strategies. A PID controller is developed to command the position of the weight and a servomechanism model is used to predict its actual position. Then, the moving-weight system is incorporated into LAMP (Large–Amplitude–Motion Program), a computer code that integrates the governing equations of the sea and the motion of the ship interactively and simultaneously and predicts the motion of the ship in the time domain. A comparison of the results from the two simulations shows that there is fairly good correlation between the simple and complex models, but the simple model is a little optimistic in predicting the effectiveness of the moving-weight system. The results predict that the moving-weight system can be an excellent roll-suppressing device when the moving weight is as small as 1% of the displacement of the ship and the maximum distance the weight moves is as small as 15% of the half-beam. 相似文献
18.
大型集装箱船（LCS）具有较大的甲板开口，抗扭刚度非常低。在恶劣海况下航行时，大型集装箱船可能会遭遇斜浪的作用，此时船体将受到三向载荷的联合作用，水平波浪弯矩和扭转波浪弯矩可能会接近甚至超过垂向波浪弯矩，船体可能因发生组合变形而破坏。因此有必要研究大型集装箱船在三向载荷联合作用下的结构可靠性。在研究三向载荷联合作用下各维度极限强度的相互关系的基础上，提出了大型集装箱船的极限承载能力的可靠性评估方法，并对目标船在各浪向角下的结构可靠性进行评估。结果表明：目标船在0°浪向角下的失效概率最高；考虑水平波浪弯矩影响后目标船的结构可靠性有所降低；扭转波浪弯矩对目标船船中剖面的结构可靠性影响较小。 相似文献
19.
Ship motions after damage are difficult to evaluate since they are affected by complex phenomena regarding fluid and structures interactions. The possibility to better understand how ship behavior in damage is influenced by these phenomena is important for improving ship safety, especially for passenger vessel.In this paper an experimental campaign is carried out on a passenger ferry hull, to show the effects of the water dynamics across damage openings on ship motions. Novel aspects of this research include the study of the effects of the damage position on the ship roll response. The study is carried out for still water and for beam regular waves at zero speed.Results from the experiments carried out underline that the roll behavior of a damaged ship is affected by the position of damage opening and not only by its size. Assuming the same final equilibrium conditions after flooding but characterized by different damage openings it is possible to observe how motions RAOs and roll decay characteristics modify according to the opening locations. 相似文献
20.
Based on Green–Naghdi equation this work studies unsteady ship waves in shallow water of varying depth. A moving ship is regarded as a moving pressure disturbance on free surface. The moving pressure is incorporated into the Green–Naghdi equation to formulate forcing of ship waves in shallow water. The frequency dispersion term of the Green–Naghdi equation accounts for the effects of finite water depth on ship waves. A wave equation model and the finite element method (WE/FEM) are adopted to solve the Green–Naghdi equation. The numerical examples of a Series 60 (CB=0.6) ship moving in shallow water are presented. Three-dimensional ship wave profiles and wave resistance are given when the ship moves in shallow water with a bed bump (or a trench). The numerical results indicate that the wave resistance increases first, then decreases, and finally returns to normal value as the ship passes a bed bump. A comparison between the numerical results predicted by the Green–Naghdi equation and the shallow water equations is made. It is found that the wave resistance predicted by the Green–Naghdi equation is larger than that predicted by the shallow water equations in subcritical flow
, and the Green–Naghdi equation and the shallow water equations predict almost the same wave resistance when
, the frequency dispersion can be neglected in supercritical flows. 相似文献