共查询到20条相似文献，搜索用时 31 毫秒
1.
A three-dimensional model of a two-part underwater towed system is studied. In the model, the governing equations of cables are established based on the Ablow and Schechter method. The boundary conditions for the two-part underwater towed system are derived. The six-degrees-of-freedom equations of motion for submarine simulations are adopted to predict the hydrodynamic performance of a towed vehicle. The established governing equations for the system are then solved using a central finite difference method. In this paper several algorithms are used to solve this special form of finite difference equations. The results in this paper indicate that the two-part underwater towed system improves the dynamic behavior of the towed vehicle and is an easy way to decouple the towing ship motion from the towed vehicle. Because the model uses an implicit time integration, it is stable for large time steps and is an effective algorithm for simulation of a large-scale underwater towed system. 相似文献
2.
Hyeon Kyu Yoon Nam Sun Son Gyeong Joong Lee 《Oceanic Engineering, IEEE Journal of》2007,32(4):798-806
When a fast container ship or a naval vessel turns, accompanying roll motions occur. This roll effect must be considered in the horizontal equations of the motion of the ship to predict the maneuverability of the ship properly. In this paper, a new method for determining a model structure of the hydrodynamic roll moment acting on a ship and for estimating the hydrodynamic coefficients is proposed. The method utilizes a system identification technique with the data from sea trial tests or from free running model (FRM) tests. To obtain motion data that is applied to the proposed algorithm, an FRM of a large container ship was developed. Using this model ship, standard maneuvering tests were carried out on a small body of water out of doors. A hydrodynamic roll moment model was constructed utilizing the data from turning circle tests and a 20-20 zig-zag test. This was then confirmed through a 10-10 zig-zag test. It was concluded that a model structure of the hydrodynamic roll moment model could be established without difficulty through a system identification method and FRM tests. 相似文献
3.
This study investigates the coupling effects of six degrees of freedom in ship motion with fluid oscillation inside a three-dimensional rectangular container using a novel time domain simulation scheme. During the time marching, the tank-sloshing algorithm is coupled with the vessel-motion algorithm so that the influence of tank sloshing on vessel motions and vice versa can be assessed. Several factors influencing the dynamic behavior of tank–liquid system due to moving ship are also investigated. These factors include container parameters, environmental settings such as the significant wave height, current velocity as well as the direction of wind, wave and flow current acting on the ship. The nonlinear sloshing is studied using a finite element model whereas nonlinear ship motion is simulated using a hybrid marine control system. Computed roll response is compared with the existing results, showing fair agreement. Although the two hull forms and the sea states are not identical, the numerical result shows the same trend of the roll motion when the anti-rolling tanks are considered. Thus, the numerical approach presented in this paper is expected to be very useful and realistic in evaluating the coupling effects of nonlinear sloshing and 6-DOF ship motion. 相似文献
4.
This paper outlines a procedure for the derivation of the differential equations describing the free response of a heaving and pitching ship from its stationary response to random waves. The coupled heave–pitch motion of a ship in random seas is modelled as a multi-dimensional Markov process. The partial differential equation describing the transition probability density function, known as the Fokker-Planck equation, for this process is derived. The Fokker-Planck equation is used to derive the random decrement equations for the coupled heave–pitch motion. The parameters in these equations are then identified using a neural network approach. The method is validated using numerical simulations and experimental results. The experimental data was obtained using an icebreaker ship model heaving and pitching in random waves. It is shown that the method produces good results when the system is lightly damped. An extension for using this method to identify couple heave–pitch motion in realistic seas is suggested. 相似文献
5.
The use of wavelet transforms is explored to investigate the nonlinear dynamical characteristics of ship roll and coupled heave-roll motion. The harmonic character, double period character and chaotic character are observed via a time–frequency window of the wavelet transform. Typical wave parameters in different stability regions are considered. Features such as restoring rolling, divergence rolling, steady state and chaotic responses of ship roll are obtained as well. The investigation in this paper not only highlights the feasibility of using wavelet transforms in the analysis of nonlinear dynamic characteristics of ship rolling in waves, but also shows how it could enhance the analysis abilities. 相似文献
6.
波浪作用下缆船拖带系统非线性运动数值模拟 总被引：1，自引：0，他引：1
基于船舶操纵性运动方程和拖缆的三维动力学运动方程,提出了被拖点位置匹配的方法,建立了拖船—拖缆—被拖船系统整体非线性拖带动力学模型。为了考察被拖船航向稳定性与横向稳性的关系以及波浪载荷作用的影响,被拖船采用水平面四自由度运动方程,并引入了波浪的作用力和力矩。拖船采用PD控制方法较真实地模拟了拖船航向改变的运动过程。对一个拖船—拖缆—被拖船系统(5 000 t的拖船和3 000 t的被拖船)在时域内进行了规则波浪作用下拖带运动的模拟,计算结果表明被拖带船舶在波浪中运动呈现运动稳定、不稳定和临界状态3种可能的特性。根据模拟计算结果,认为波浪中拖带航向稳定是被拖带船舶保持稳性的必要条件。 相似文献
7.
Based on Green–Naghdi equation this work studies unsteady ship waves in shallow water of varying depth. A moving ship is regarded as a moving pressure disturbance on free surface. The moving pressure is incorporated into the Green–Naghdi equation to formulate forcing of ship waves in shallow water. The frequency dispersion term of the Green–Naghdi equation accounts for the effects of finite water depth on ship waves. A wave equation model and the finite element method (WE/FEM) are adopted to solve the Green–Naghdi equation. The numerical examples of a Series 60 (CB=0.6) ship moving in shallow water are presented. Three-dimensional ship wave profiles and wave resistance are given when the ship moves in shallow water with a bed bump (or a trench). The numerical results indicate that the wave resistance increases first, then decreases, and finally returns to normal value as the ship passes a bed bump. A comparison between the numerical results predicted by the Green–Naghdi equation and the shallow water equations is made. It is found that the wave resistance predicted by the Green–Naghdi equation is larger than that predicted by the shallow water equations in subcritical flow
, and the Green–Naghdi equation and the shallow water equations predict almost the same wave resistance when
, the frequency dispersion can be neglected in supercritical flows. 相似文献
8.
M. Taylan 《Ocean Engineering》2000,27(9):1159
Many researchers have studied a wide range of nonlinear equations of motion describing a ship rolling in waves. In this study, a form of nonlinear equation governing the motion of a rolling ship subjected to synchronous beam waves is suggested and solved by the generalized Duffing's method in the frequency domain. Various representations of damping and restoring terms found in the literature are investigated and their solutions are analyzed by the above-mentioned method. Comparative results of nonlinear roll responses are obtained for four distinct vessel types at resonance conditions which constitute the worst situation. The results indicate the importance of roll damping and restoring, when constructing a nonlinear roll model. An inappropriate selection of damping and restoring terms may lead to serious discrepancies with reality, especially in peak roll amplitudes. 相似文献
9.
The best way of reducing roll motion is by increasing roll damping. Bilge keels are the most common devices for increasing roll damping. If more control is required, anti-roll tanks and fins are used. Tanks have the advantage of being able to function when the ship is not underway. Our objective is to develop design procedures for passive tanks for roll reduction in rough seas. This paper focuses on the design of passive U-tube tanks. The tank-liquid equation of motion is integrated simultaneously with the six-degree-of-freedom (6DOF) equations of the ship motion. The coupled set of equations is solved by using the Large Amplitude Motion Program ‘LAMP’, which is a three-dimensional time-domain simulation of the motion of ships in waves. The unstabilized and stabilized roll motions of a S60-70 ship with forward speed and beam waves have been analyzed. For high-amplitude waves, the unstabilized roll angle exhibits typical nonlinear phenomena: a shift in the resonance frequency, multi-valued responses, and jumps. The performance of a S60-70 ship with a passive tank is investigated in various sea states with different encounter wave directions. It is found that passive anti-roll tanks tuned in the linear or nonlinear ranges are very effective in reducing the roll motion in the nonlinear range. The effect of the tank damping, frequency, and mass on the tank performance is studied. Also, it is found that passive anti-roll tanks are very effective in reducing the roll motion for ships having a pitch frequency that is nearly twice the roll frequency in sea states 5 and 6. 相似文献
10.
This paper deals with obtaining the governing equations of rolling motion of a ship with a flooded compartment. The equations of motion are obtained through the variational formulation in the form of Hamilton-Ostrogradskii equation by taking the ship, the fluid in the flooded compartment and the sea as a single mechanical system. Since no specification concerning ships or flooded compartments has been made, the obtained equations are applicable to any sea-going vessel. As an application, the equation of rolling motion of a ship with a prismatic flooded compartment is obtained by choosing a suitable velocity potential for the fluid motion in the compartment. 相似文献
11.
We numerically studied the full (six degrees of freedom) motion of a cargo ship without roll stabilizers in rough (sea state 5) conditions for multiple heading angles ranging from 0° (follower seas) to 180° (head seas). We found that the ship exhibits excessive roll motion in quartering (45° off the stern), beam, and head seas. Therefore, roll damping is critical in these conditions. We then investigated the performance of passive and active anti-roll tank (ART) systems and compared their performance in each of the three sea conditions. Each ART consists of three identical tanks, distributed along the centerline of the ship, each of which consists of two vertical ducts connected at the bottom with a horizontal duct. A pump is located at the middle of the horizontal duct of each tank. The pumps are switched on for active ARTs but switched off for passive ones. The loads (forces and moments) exerted on the ship by the ARTs are added to the hydrodynamic loads (e.g., due to pressure and viscous effects) and the thrust in the governing equations of motion of the ship. Whereas both passive and active ARTs are able to reduce the excessive roll motion, active ARTs outperform the passive ones from three perspectives. First, they are more effective in reducing the roll motion. Second, they require much less working liquid. Third, their performance is insensitive to their natural frequencies and, hence, to their geometric design. In addition, we found that head seas are most responsive to ARTs, which suggests that they are effective in mitigating parametric roll. 相似文献
12.
This study considers the coupling effects of ship motion and sloshing. The linear ship motion is solved using an impulse-response-function (IRF) method, while the nonlinear sloshing flow is simulated using a finite-difference method. The IRF method requires the frequency-domain solution prior to conversion to time domain, but the computational effort is much less than that of direct time-domain approaches. The developed scheme is verified by comparing the motion RAOs between the frequency-domain solution and the solution obtained by the IRF method. Furthermore, a soft-spring concept and linear roll damping are implemented to predict more realistic motions of surge, sway, yaw, and roll. For the simulation of sloshing flow in liquid tanks, a physics-based numerical approach adopted by Kim [2001. Numerical simulation of sloshing flows with impact load. Applied Ocean Research 23, 53–62] and Kim et al. [2004. Numerical study on slosh-induced impact pressures on three-dimensional prismatic tanks. Applied Ocean Research 26, 213–226] is applied. In particular, the present method focuses on the simulation of the global motion of sloshing flow, ignoring some local phenomena. The sloshing-induced forces and moments are added to wave-excitation forces and moments, and then the corresponding body motion is obtained. The developed schemes are applied for two problems: the sway motion of a box-type barge with rectangular tanks and the roll motion of a modified S175 hull with rectangular anti-rolling tank. Motion RAOs are compared with existing results, showing fair agreement. It is found that the nonlinearity of sloshing flow is very important in coupling analysis. Due to the nonlinearity of sloshing flow, ship motion shows a strong sensitivity to wave slope. 相似文献
13.
This paper proposes a geometrically exact formulation for three-dimensional static and dynamic analyses of the umbilical cable in a deep-sea remotely operated vehicle (ROV) system. The presented formulation takes account of the geometric nonlinearities of large displacement, effects of axial load and bending stiffness for modeling of slack cables. The resulting nonlinear second-order governing equations are discretized spatially by the finite element method and solved temporally by the generalized- implicit time integration algorithm, which is adapted to the case of varying coefficient matrices. The ability to consider three-dimensional union action of ocean current and ship heave motion upon the umbilical cable is the key feature of this analysis. The presented formulation is firstly validated, and then three numerical examples for the umbilical cable in a deep-sea ROV system are demonstrated and discussed, including the steady configurations only under the action of depth-dependent ocean current, the dynamic responses in the case of the only ship heave motion, and in the case of the combined action of the ship heave motion and ocean current. 相似文献
14.
This paper proposes a geometrically exact formulation for three-dimensional static and dynamic analyses of the umbilical cable in a deep-sea remotely operated vehicle(ROV) system. The presented formulation takes account of the geometric nonlinearities of large displacement, effects of axial load and bending stiffness for modeling of slack cables. The resulting nonlinear second-order governing equations are discretized spatially by the finite element method and solved temporally by the generalized-a implicit time integration algorithm, which is adapted to the case of varying coefficient matrices. The ability to consider three-dimensional union action of ocean current and ship heave motion upon the umbilical cable is the key feature of this analysis. The presented formulation is firstly validated, and then three numerical examples for the umbilical cable in a deep-sea ROV system are demonstrated and discussed, including the steady configurations only under the action of depth-dependent ocean current, the dynamic responses in the case of the only ship heave motion, and in the case of the combined action of the ship heave motion and ocean current. 相似文献
15.
In current Naval Architecture practice, employing static considerations is an important and necessary step in assessing ship stability and seakeeping properties (e.g. inclining experiments, load line regulations, range of stability calculations). However, damaged vessels and vessels operating in heavy weather or in conditions where topside icing is a concern may require an additional assessment of stability that considers dynamic effects. Within such contexts, the actual (i.e. current) second moment properties of the vessel mass become very important in the associated equations of motion for a given ship. One such critical second mass moment property is the roll gyradius, as it is closely related to the occurrence of capsizing. The present paper furnishes a means for reckoning the actual roll gyradius of a given ship operating within a seaway. The approach hinges on the formulation and solution of a stochastic inverse problem that leverages existing seakeeping software against the shipboard inertial measurement unit (IMU) telemetry. The method is demonstrated at full-scale and validated at model scale. 相似文献
16.
In this paper our previously developed advanced system identification technique [1] has been applied to extract the frequency dependent roll damping from a series of model tests run in irregular (random) waves. It is shown that this methodology accurately models the roll damping which can then be used to produce accurate predictions of the ships roll motion. These roll motion predictions are not only more accurate than the potential flow predictions but more accurate than potential flow models corrected using either empirical prediction methods [2] and even those corrected using roll damping obtained from free decay sallying experiments. This methodology has the potential to significantly improve roll motion prediction during full scale at sea trails of vessels in order to dramatically improve safety of critical operations such as helicopter landing or ship to ship cargo transfer. 相似文献
17.
Non-Linear Response of Tethers Subjected to Parametric Excitation in Submerged Floating Tunnels 总被引：1，自引：0，他引：1
For the study of the non-linear response of inclined tethers subjected to parametric excitation in submerged floating tunnels,a theoretical model for coupled tube-tether vibration is developed.Upon the assumption that the static equilibrium position of the tether is a quadratic parabola,the governing differential equations of the tether motion are derived by use of the Hamilton principle.An approximate numerical solution is obtained by use of Galerkin method and Runge-kutta method.The results show that,when the static equilibrimn position of the tether is assumed to be a quadratic parabola,the tether sag effect on its vibration may be reflected;the tether sag results in the asymmetry of tether vibration amplitude;for the reduction of the tether amplitude,the buoyant unit weight of the tether should approach to zero as far as possible during the design. 相似文献
18.
It has been observed that the unrestrained free surface of a container can create relatively large liquid movements for even very small motions of the container. This excessive movement may endanger the stability as well as the maneuvering quality of the transporting vehicle. Therefore, the effects of the dynamic coupling of a liquid-tank system are of great concern. This dynamic coupling problem is studied analytically for a two-dimensional, rectangular rigid tank with no baffles. The governing equations of the liquid motion are derived with reference to a moving coordinate system which is fixed to the moving container. With the liquid forces generated by the fluid motion as the external exciting force for the tank, the motions of the liquid-tank system can be described according to Newton's Second Law of Motion. By using the Laplace transformation technique, the dynamic responses of the coupled system can be examined in detail. Numerical results for various types of external excitations and the resultant motions of the fluid-tank system are presented and compared with the equivalent non-shifting cargo system. The results of the comparison indicate that the discrepancy of responses in the two systems can obviously be observed when the ratio of the natural frequency of the fluid and the natural frequency of the tank is close to unity. Also, the amount of fluid inside the tank is a very important factor in determining the responses. 相似文献
19.
This study introduces a method of calculating a capsizing rate of a ship. The phenomenon ‘capsizing’ is described as a jump of local equilibrium point from that near the upright position of a ship to what describes the upside-down attitude of the capsized ship; the rate of occurrence of such jumps was calculated. The potential function corresponding to the roll restoring moment have two potential wells located at the roll displacement angle 0 and 180°, respectively. A nonlinear Fokker–Planck equation for the joint probability density function of roll angle and velocity was solved. The excitation to the ship was assumed to be a combination of a regular harmonic wave and a white noise process. 相似文献
20.
The purpose of this paper is to analyze the nonlinear ship roll motion equation and the main parameters that induce ship capsizing in beam seas, estimate the survival probability of a ferry in random seas and to find out a risk assessment method for the ship’s intact stability. A single degree of freedom (1-DOF) dynamic system of ship rolling in beam seas is investigated and the nonlinear differential equation is solved in the time domain by the fourth order Runge-Kutta algorithm. The survival probability of a ferry in beam seas is investigated using the theory of “safe basin”. The survival probability is calculated by estimating erosion of “safe basin” during ship rolling motion by Monte Carlo simulations. From the results it can be concluded that the survival probability of a ship in beam sea condition can be predicted by combining Monte Carlo simulations and the theory of “safe basin”. 相似文献