共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
3.
针对现有拖曳式水下潜器控制机构复杂、航向与姿态不容易稳定的缺陷,提出和设计了一种具有航向与姿态稳定的多自由度可控制拖曳式水下潜器样机。该样机主要由鱼雷状浮体、固定水平主翼、转角可控制襟翼、立式翼型主体等部分组成,潜器的深度控制通过控制襟翼的偏转来诱导固定水平主翼攻角的改变来实现;潜器的横荡运动操纵以通过控制两个作为转艏控制器的导管螺旋桨的转向与转速、诱导立式翼型主体产生诱导力矩使其产生横向偏转来进行。文中所提出和设计的样机具有运动过程中自我稳定能力强、航向稳定性好、控制机构简单并具有较高实用价值的特点。 相似文献
4.
Energy-optimal trajectories for underwater vehicles be computed using a numerical solution of the optimal control problem. A performance index consisting of a weighted combination of energy and time consumption is proposed. Collision avoidance is solved by including path constraints. Control vector parameterization with direct single shooting is used in this study. The vehicle is modeled with six-dimensional nonlinear and coupled equations of motion. Optimal trajectories are computed for a vehicle controlled in all six degrees of freedom by dc-motor-driven thrusters. Good numerical results are achieved 相似文献
5.
Wave effects on ascending and descending motions of the autonomous underwater vehicle 总被引：1，自引：0，他引：1
In the paper, a hydrodynamic model including the characteristics of maneuvering and seakeeping is developed to simulate the six-degree of freedom motions of the underwater vehicle steering near the sea surface. The corresponding wave exciting forces on the underwater vehicle moving in waves are calculated by the strip theory, which is based on the source distribution method. With the hydrodynamic coefficients relevant to the maneuvering and seakeeping, the fourth-order Runge–Kutta numerical method is adopted to solve the equations of motions and six-degrees of freedom of the motions for the underwater vehicle steering near the free surface can be obtained. The wave effect on the corresponding motions of the underwater vehicle is investigated and some interesting phenomena with respect to different wave frequencies and headings are observed. The hydrodynamic numerical model developed here can be served as a valuable tool for analyzing the ascending and descending behaviors of the underwater vehicle near the sea surface. 相似文献
6.
The paper addresses the problem of autonomous underwater vehicle (AUV) modelling and parameter estimation as a means to predict the dynamic performance of underwater vehicles and thus provide solid guidelines during their design phase. The use of analytical and semi-empirical (ASE) methods to estimate the hydrodynamic derivatives of a popular class of AUVs is discussed. A comparison is done with the results obtained by using computational fluid dynamics to evaluate the bare hull lift force distribution around a fully submerged body. An application is made to the estimation of the hydrodynamic derivatives of the MAYA AUV, an autonomous underwater vehicle developed under a joint Indian-Portuguese project. The estimates obtained were used to predict the turning diameter of the vehicle during sea trials. 相似文献
7.
《中国海洋工程》2015,(6)
To achieve accurate positioning of autonomous underwater vehicles, an appropriate underwater terrain database storage format for underwater terrain-matching positioning is established using multi-beam data as underwater terrainmatching data. An underwater terrain interpolation error compensation method based on fractional Brownian motion is proposed for defects of normal terrain interpolation, and an underwater terrain-matching positioning method based on least squares estimation(LSE) is proposed for correlation analysis of topographic features. The Fisher method is introduced as a secondary criterion for pseudo localization appearing in a topographic features flat area, effectively reducing the impact of pseudo positioning points on matching accuracy and improving the positioning accuracy of terrain flat areas. Simulation experiments based on electronic chart and multi-beam sea trial data show that drift errors of an inertial navigation system can be corrected effectively using the proposed method. The positioning accuracy and practicality are high, satisfying the requirement of underwater accurate positioning. 相似文献
8.
To achieve accurate positioning of autonomous underwater vehicles, an appropriate underwater terrain database storage format for underwater terrain-matching positioning is established using multi-beam data as underwater terrain-matching data. An underwater terrain interpolation error compensation method based on fractional Brownian motion is proposed for defects of normal terrain interpolation, and an underwater terrain-matching positioning method based on least squares estimation (LSE) is proposed for correlation analysis of topographic features. The Fisher method is introduced as a secondary criterion for pseudo localization appearing in a topographic features flat area, effectively reducing the impact of pseudo positioning points on matching accuracy and improving the positioning accuracy of terrain flat areas. Simulation experiments based on electronic chart and multi-beam sea trial data show that drift errors of an inertial navigation system can be corrected effectively using the proposed method. The positioning accuracy and practicality are high, satisfying the requirement of underwater accurate positioning. 相似文献
9.
Traditionally autonomous underwater vehicles (AUVs) have been built with a torpedo-like shape. This common shaping is hydrodynamically suboptimal for those AUVs required to operate at snorkeling condition near the free surface. In this case, the wave resistance associated to the wavy deformation of the sea surface induced by the motion of the platform is an important component of the drag. This work has investigated the optimum hull shape of an underwater vehicle moving near the free surface. Specifically a first-order Rankine panel method has been implemented to compute the wave resistance on a body of revolution moving close to the free surface. A simulated annealing algorithm was then employed to search those set of parameters defining the hull shape that minimize the wave resistance. The optimization was constrained to keep constant the total volume of the vehicle. The total drag of scaled models of the torpedo-like and resulting optimum shapes was measured in the naval tank of the University of Trieste. Measurements showed a smaller resistance of the optimized shape in the range of the considered Froude numbers. 相似文献
10.
Przemysław Herman 《Ocean Engineering》2009,36(3-4):306-312
A method for dynamics investigation and coupling detection between velocities of autonomous underwater vehicles (AUVs) is presented in this paper. The method is based on transformation of equations of motion, which are usually used for an underwater vehicle, into equations with a diagonal mass matrix. The obtained equations contain quasi-velocities and allow one to give a further insight into the AUV dynamics especially for an underactuated system. Some advantages of the proposed approach are discussed, too. An analytical example for a 3-DOF AUV shows possible application of the transformed equations. Moreover, the given approach is validated via simulation on a 6-DOF vehicle. 相似文献
11.
为明确高海况下海况等级对无人水下航行器横摇运动的影响,得出满足某型无人水下航行器安全回收的海况条件,对高海况下无人水下航行器的横摇运动进行分析。运用频率响应法,分别在4级、5级和6级海况下，根据海浪谱密度函数和该型航行器的横摇频率响应函数,求得其横摇运动谱密度函数。再运用公式推导,得到其横摇运动的时域函数。使用MATLAB仿真软件对该型航行器进行横摇运动仿真,得到3种海况条件下，其横摇运动的时域函数图像,并验证仿真结果的准确性。仿真结论:高海况下的海况等级对无人水下航行器的横摇幅度有较大影响,满足其安全回收的海况条件为5级海况。 相似文献
12.
Depth-trim mapping control of underwater vehicle with fins 总被引：1，自引：1，他引：0
Underwater vehicle plays an important role in ocean engineering.Depth control by fin is one of the difficulties for underwater vehicle in motion control.Depth control is indirect due to the freedom coupling between trim and axial motion.It includes the method of dynamic analysis and lift-resistance-coefficient experiment and theory algorithm.By considering the current speed and depth deviation,comprehensive interpretation is used in object-planning instruction.Expected depth is transformed into expected trim.Dynamic output fluctuation can be avoided,which is caused by linear mapping of deviation.It is steady and accurate for the motion of controlled underwater vehicles.The feasibility and efficiency of the control method are testified in the pool and natural area for experiments. 相似文献
13.
The hydrodynamic interaction between an Autonomous Underwater Vehicle (AUV) manoeuvring in close proximity to a larger underwater vehicle can cause rapid changes in the motion of the AUV. This interaction can lead to mission failure and possible vehicle collision. Being self-piloted and comparatively small, an AUV is more susceptible to these interaction effects than the larger body. In an aim to predict the manoeuvring performance of an AUV under the effects of the interaction, the Australian Maritime College (AMC) has conducted a series of computer simulations and captive model experiments. A numerical model was developed to simulate pure sway motion of an AUV at different lateral and longitudinal positions relative to a larger underwater vehicle using Computational Fluid Dynamics (CFDs). The variables investigated include the surge force, sway force and the yaw moment coefficients acting on the AUV due to interaction effects, which were in turn validated against experimental results. A simplified method is presented to obtain the hydrodynamic coefficients of an AUV when operating close to a larger underwater body by transforming the single body hydrodynamic coefficients of the AUV using the steady-state interaction forces. This method is considerably less time consuming than traditional methods. Furthermore, the inverse of this method (i.e. to obtain the steady state interaction force) is also presented to obtain the steady-state interaction force at multiple lateral separations efficiently. Both the CFD model and the simplified methods have been validated against the experimental data and are capable of providing adequate interaction predictions. Such methods are critical for accurate prediction of vehicle performance under varying conditions present in real life. 相似文献
14.
15.
针对自治水下机器人(Autonomous underwater vehicle,AUV)推力器布置和控制仿真的困难性及以往电机仿真难以进行的缺点,提出1种进行多推力器运动仿真的方法,该方法建立的模型克服了推力器推力控制系统不能与电机结合的问题,能较好地反映推力器布置和电机的响应情况,可为AUV的运动控制、布置设计及控制系统开发等提供验证模型.针对流线型AUV CRanger-2的推力器布置情况,在对其建立推力器模型的基础上,利用模型对设定推力下的推力器控制进行仿真.仿真结果表明:该方法能够有效地模拟推力器布置既定情况下的电机运动与推力控制,可为水下机器人控制策略优化提供仿真平台. 相似文献
16.
On the motions of the underwater remotely operated vehicle with the umbilical cable effect 总被引：1，自引：0，他引：1
In this paper, a hydrodynamic model is developed to simulate the six degrees of freedom motions of the underwater remotely operated vehicle (ROV) including the umbilical cable effect. The corresponding hydrodynamic forces on the underwater vehicle are obtained by the planar motion mechanism test technique. With the relevant hydrodynamic coefficients, the 4th-order Runge–Kutta numerical method is then adopted to solve the equations of motions of the ROV and the configuration of the umbilical cable. The multi-step shooting method is also suggested to solve the two-end boundary-value problem on the umbilical cable with respect to a set of first-order ordinary differential equation system. All operation simulations for the ROV including forward moving, ascending, descending, sideward moving and turning motions can be analyzed, either with or without umbilical cable effect. The current effect is also taken into consideration. The present results reveal that the umbilical cable indeed significantly affects the motion of the ROV and should not be neglected in the simulation. 相似文献
17.
水声通信和测距能力是实现水下航行器准确定位的重要技术手段。当前基于水声定位的方法主要有利用测距和测向功能的水声定位技术以及水声测距辅助导航技术，二者的系统物理复杂度都比较高。本文提出了一种基于单水声信标距离量测的匹配定位方法，航行器在水声信标测距覆盖范围内，利用航行过程中多次测距信息构建测距圆序列形成位置约束，基于航位推算导航信息，将航行器在连续测距时间段内的相对航迹在圆序列上进行最优匹配，从而获得位置估计，通过对测距误差进行补偿可进一步提升定位精度。本方法所需物理系统结构复杂度低、可操作性强，仿真实验表明，该方法可以独立实现较高精度的定位。 相似文献
18.
Adaptive optimal control of an autonomous underwater vehicle in the dive plane using dorsal fins 总被引：1，自引：0，他引：1
In this paper, adaptive control of low speed bio-robotic autonomous underwater vehicles (BAUVs) in the dive plane using dorsal fins is considered. It is assumed that the model parameters are completely unknown and only the depth of the vehicle is measured for feedback. Two dorsal fins are mounted in the horizontal plane on either side of the BAUV. The normal force produced by the fins, when cambered, is used for the maneuvering. The BAUV model considered here is non-minimum phase. An indirect adaptive control system is designed for the depth control using the dorsal fins. The control system consists of a gradient based identifier for online parameter estimation, an observer for state estimation, and an optimal controller. Simulation results are presented which show that the adaptive control system accomplishes precise depth control of the BAUV using dorsal fins in spite of large uncertainties in the system parameters. 相似文献
19.
This paper presents a method for identification of the hydrodynamic coefficients of the dive plane of an autonomous underwater vehicle. The proposed identification method uses the governing equations of motion to estimate the coefficients of the linear damping, added mass and inertia, cross flow drag and control. Parts of data required by the proposed identification method are not measured by the onboard instruments. Hence, an optimal fusion algorithm is devised which estimates the required data accurately with a high sampling rate. To excite the dive plane dynamics and obtain the required measurements, diving maneuvers should be performed. Hence, a reliable controller with satisfactory performance and stability is needed. A cascaded controller is designed based on the coefficients obtained using a semi-empirical method and its robustness to the uncertainties is verified by the μ-analysis method. The performance and accuracy of the identification and fusion algorithms are investigated through 6-DOF numerical simulations of a realistic autonomous underwater vehicle. 相似文献
20.