共查询到20条相似文献，搜索用时 15 毫秒
1.
CO 2 capture and storage projects must consider the potential possibility ofinjection induced seismicity. Moderate earthquakes and strong earthquakes may endanger human life and property, and even felt earthquakes and microquakes also pose a threat to seal integrity of CO 2 reservoir and increase the risk of leakage. Underground fluid injection induced seismicity usually happens in some geoengineering projects such as waste fluid disposal, EOR and EGS, and it occurs when fluid is injected along the fault. Therefore, it can be studied through stress analysis. The density of supercritical CO 2 is smaller than water, which may develop density flow in the deep strata or water-rock interactions in pre-existing structures, and cause the variation in permeability and pressure to induce a seismic activity. In this paper, we reviewed the mechanism of underground fluid injection induced seismicity with the focus of CCS, combined with fluid injection projects and seismic monitoring analysis in both commercial scale and experimental scale, to investigate its impact on the integrity of the cap rock of the reservoir. Finally, we summarized the appropriate site selection, injection methods and monitoring programs to prevent the occurrence of induced seismicity. 相似文献
2.
The annual and cumulative catalogues of Canadian earthquakes prepared by the Department of Energy, Mines and Resources, are critically examined to determine if they contain examples of induced seismic activity caused by fluid injection in oil fields, by the impounding of water in large reservoirs or by mining. It is concluded that there is just one example each of induced seismic activity caused by fluid injection and by reservoir impoundment, but that there are many examples of induced seismic activity associated with mining. These include both mine bumps and rockbursts. 相似文献
3.
Although the upper Mississippi embayment is an area of low relief, the region has been subjected to tectonic influence throughout its history and continues to be so today. Tectonic activity can be recognized through seismicity patterns and geological indicators of activity, either those as a direct result of earthquakes, or longer term geomorphic, structural, and sedimentological signatures. The rate of seismic activity in the upper Mississippi embayment is generally lower than at the margins of tectonic plates; the embayment, however, is the most seismically active region east of the Rocky Mountains, with activity concentrated in the New Madrid seismic zone. This zone produced the very large New Madrid earthquakes of 1811 and 1812. Geological and geophysical evidence of neotectonic activity in the upper Mississippi embayment includes faulting in the Benton Hills and Thebes Gap in Missouri, paleoliquefaction in the Western Lowlands of Missouri, subsurface faulting beneath and tilting of Crowley's Ridge in northeastern Arkansas and southeastern Missouri, subsurface faulting along the Crittenden County fault zone near Memphis, Tennessee, faulting along the east flank of the Tiptonville dome, and numerous indicators of historic and prehistoric large earthquakes in the New Madrid seismic zone. Paleoearthquake studies in the New Madrid seismic zone have used trenching, seismic reflection, shallow coring, pedology, geomorphology, archaeology, and dendrochronology to identify and date faulting, deposits of liquefied sand, and areas of uplift and subsidence. The cause of today's relatively high rate of tectonic activity in the Mississippi embayment remains elusive. It is also not clear whether this activity rate is a short term phenomenon or has been constant over millions of years. Ongoing geodetic and geological studies should provide more insight as to the precise manner in which crustal strain is accumulating, and perhaps allow improved regional neotectonic models. 相似文献
4.
The seismicity of a region is implicit of the causal faulting mechanisms and geodynamic diversity of the subsurface regime
nucleating earthquakes of different magnitudes, several of which may be as devastating as ones historically reported in global
perspective of tectonic complexity as in the case of India. Fractal analysis using box-counting method for the major fault
networks across the country estimates fractal dimension, D f, values to be varying between 0.88 and 1.36. The fault segments in parts of northwest Himalayas, northeast India and Indo-Gangetic
plains, are observed to be associated with higher D f values implicating high seismicity rates. On the other hand, low D f values in the peninsular India indicate isolated pattern of the underlying faults. The fractal dimension is observed to be
indicative of predominant faulting types — higher values conforming to thrust faulting mechanism while lower to strike slip
tectonism. 相似文献
5.
Induced seismicity (earthquakes caused by injection or extraction of fluids in Earth’s subsurface) is a major, new hazard in the USA, the Netherlands, and other countries, with vast economic consequences if not properly managed. Addressing this problem requires development of predictive simulations of how fluid-saturated solids containing frictional faults respond to fluid injection/extraction. Here, we present a finite difference method for 2D linear poroelasticity with rate-and-state friction faults, accounting for spatially variable properties. Semi-discrete stability and accuracy are proven using the summation-by-parts, simultaneous-approximation-term (SBP-SAT) framework for discretization and boundary condition enforcement. Convergence rates are verified using the method of manufactured solutions and comparison to the analytical solution to Mandel’s problem. The method is then applied to study fault slip triggered by fluid injection and diffusion through high-permeability fault damage zones. We demonstrate that in response to the same, gradual forcing, fault slip can occur in either an unstable manner, as short-duration earthquakes that radiate seismic waves, or as stable, aseismic, slow slip that accumulates over much longer time scales. Finally, we use these simulation results to discuss the role of frictional and elastic properties in determining the stability and nature of slip. 相似文献
6.
吉塞尔斯地震活动可能是因蒸汽开发引起的.水在一个承受很高构造剪应力和应变的大范围破裂体中汽化为蒸汽。 汽田地震震源机制解与区域构造应变场几乎一致,并且在该区域范围内汽田地震与别的构造地震不易区分。观测中注意到地震活动与注液历史无关,这表明孔隙水压力增高与注液不可能是吉塞尔斯诱发地震的成因。 相反,所有证据都表明诱发地震与孔隙水压力及温度降低有关。形成机制有两种最大可能:其一,是裂隙排水(汽)导致局部剪应力增加所致,其二,是由稳定滑动转化为不稳定滑动(粘滑)。没有其它记载的诱发地震机制与吉塞尔斯汽田条件相符。 相似文献
7.
In order to adopt the best safety procedures, man-made earthquakes should be differentiated as a function of their origin. At least four different types of settings can be recognized in which anthropogenic activities may generate seismicity: (I) fluid removal from a stratigraphic reservoir in the underground can trigger the compaction of the voids and the collapse of the overlying volume, i.e., graviquakes; the deeper the reservoir, the bigger the volume and the earthquake magnitude; (II) wastewater or gas reinjection provides the reduction of friction in volumes and along fault planes, allowing creep or sudden activation of tectonic discontinuities, i.e., reinjection quakes; (III) fluid injection at supra-lithostatic pressure generates hydrofracturing and micro-seismicity, i.e., hydrofracturing quakes; (IV) fluid extraction or fluid injection, filling or unfilling of artificial lakes modifies the lithostatic load, which is the maximum principal stress in extensional tectonic settings, the minimum principal stress in contractional tectonic settings, and the intermediate principal stress in strike-slip settings, i.e., load quakes; over given pressure values, the increase of the lithostatic load may favour the activation of normal faults, whereas its decrease may favour thrust faults. For example, the filling of an artificial lake may generate normal fault-related seismicity. Therefore, each setting has its peculiarities and the knowledge of the different mechanisms may contribute to the adoption of the appropriate precautions in the various industrial activities. 相似文献
8.
Theories of the physical processes leading to the stimulation of seismic activity by underground explosions, fluid injection, and reservoir impoundment are summarized. In all cases, the materials must be pre-stressed to a substantial fraction of their breaking strength in order for seismicity to be induced. Stress concentrations due to the presence of old faults or to inhomogeneities in the material properties play an important role in localizing induced seismicity. For the few cases for which data are available, the stimulation of earthquakes by fluid injection in bore holes is adequately explained by a Coulomb-Mohr failure criterion and the concept of effective pressure in a water-filled porous mechanism. Reservoir-related earthquakes are most likely due to the same mechanism, but, in view of the low injection pressures, additional physical or chemical effects of the water on the materials may play an important role. There may be a weakening of the materials in old fault zones by the introduction of water or static fatigue in silicate rocks due to stress corrosion. 相似文献
9.
This study analyzed the rupture directivity of the 2011 Tohoku earthquake by using 100-s Rayleigh-wave travel-times, influenced by the finite source, to derive the fault parameters of the earthquake. The results demonstrated that the earthquake exhibited a slow rupture propagation with a rupture velocity of approximately 1.5–2.0 km/s and asymmetric bilateral faulting. The two rupture directions were N60°E and N127°E, with rupture lengths of approximately 276 km and 231 km, respectively. The rupture toward N60°E had a source duration of approximately 183 s, longer than that toward N127°E (approximately 156 s). Overall, the entire source duration of the earthquake faulting lasted approximately 183 s. Regarding historical seismicity in eastern Japan, the 2011 Tohoku earthquake not only ruptured a locked area in which large earthquakes have rarely occurred, but also ruptured the source regions of several historical earthquakes. With the exception of its slow rupture velocity and generation of a tsunami, the rupture features of the 2011 Tohoku earthquake were inconsistent with those of typical tsunami earthquakes. 相似文献
10.
Changes in seismic activity have been related to the filling of large reservoirs in over thirty cases. These changes range from variations in the level of micro-earthquake activity detectable only with instruments of high sensitivity to destructive earthquakes with magnitudes greater than 6. On the other hand, the filling of many other large reservoirs has not been accompanied by increased seismicity. A number of factors may contribute to the generation or absence of post-impounding seismicity. Increased vertical stress due to the load of the reservoir and decreased effective stress due to increased pore pressure can modify the stress regime in the reservoir region. Whether or not these stress changes are sufficient to generate earthquake activity will depend on a complex interaction of the induced stress with the state of pre-existing stress near the reservoir, and on the geologic and hydrologic conditions at the site. The combined effect of increased vertical load and increased pore pressure will have the greatest tendency to increase activity in regions where the maximum compressive stress is vertical (normal faulting). In regions where the minimum compressive stress is vertical (thrust faulting) increased stress due to a vertical load should have a minimum effect. For all of the larger reservoir-induced earthquakes the stress system determined from fault plane solutions is in agreement with the pre-existing stress field in the region of the reservoir. These earthquakes are all of strike-slip or normal type, there being no reported cases of large induced earthquakes with thrusting mechanisms. The potential for major changes in seismicity may be highest in regions of moderate strain accumulation (low to moderate natural seismicity). In areas of high strain accumulation and high levels of natural seismicity, the stress changes induced by the reservoir will be small compared to natural variations. In aseismic areas, with low strain accumulation, the reservoir-induced stresses may be insufficient to raise the stress level to a state of failure. 相似文献
11.
Deep fluid extraction in the Cerro Prieto geothermal field (CPGF) has caused subsidence and induced slip on tectonic faults
in the Mexicali Valley (Baja California, Mexico). The Mexicali Valley is located in the southern part of the Salton Trough,
at the boundary between the Pacific and North American plates. The Valley is characterized by being a zone of continuous tectonic
deformation, geothermal activity, and seismicity. Within the Cerro Prieto pull-apart basin, seismicity is concentrated mainly
in swarms, while strong earthquakes have occurred in the Imperial and Cerro Prieto transform faults, that are the eastern
and western bound of the basin. Since 1973, fluid extraction at the CPGF has influenced deformation in the area, accelerating
the subsidence and causing rupture (frequently as vertical slip or creep) on the surface traces of tectonic faults. Both subsidence
and fault slip are causing damage to infrastructure like roads, railroad tracks, irrigation channels, and agricultural fields.
Currently, accelerated extraction in the eastern part of CPGF has shifted eastwards the area of most pronounced subsidence
rate; this accelerated subsidence can be observed at the Saltillo fault, a southern branch of the Imperial fault in the Mexicali
Valley. Published leveling data, together with field data from geological surveys, geotechnical instruments, and new InSAR
images were used to model the observed deformation in the area in terms of fluid extraction. Since the electricity production
in the CPGF is an indispensable part of Baja California economy, extraction is sure to continue and may probably increase,
so that the problem of damages caused by subsidence will likely increase in the future. 相似文献
12.
Analysis of remote images, elevation surveys, stratigraphic cross-sections, and hydrocarbon production data demonstrates that extensive areas of wetland loss in the northern Gulf Coast region of the United States were associated with large-volume fluid production from mature petroleum fields. Interior wetland losses at many sites in coastal Louisiana and Texas are attributed largely to accelerated land subsidence and fault reactivation induced by decreased reservoir pressures as a result of rapid or prolonged extraction of gas, oil, and associated brines. Evidence that moderately-deep hydrocarbon production has induced land-surface subsidence and reactivated faults that intersect the surface include: (1) close temporal and spatial correlation of fluid production with surficial changes including rapid subsidence of wetland sediments near producing fields, (2) measurable offsets of shallow strata across the zones of wetland loss, (3) large reductions in subsurface pressures where subsidence rates are high, (4) coincidence of orientation and direction of displacement between surface fault traces and faults that bound the reservoirs, and (5) accelerated subsidence rates near producing fields compared to subsidence rates in surrounding areas or compared to geological rates of subsidence. Based on historical trends, subsidence rates in the Gulf Coast region near producing fields most likely will decrease in the future because most petroleum fields are nearly depleted. Alternatively, continued extraction of conventional energy resources as well as potential production of alternative energy resources (geopressured-geothermal fluids) in the Gulf Coast region could increase subsidence and land losses and also contribute to inundation of areas of higher elevation. 相似文献
13.
The NW–SE-trending Dinar fault is an active normal fault upon which the 1 October 1995 earthquake ( M = 6.1) occurred. The 1995 earthquake resulted in a c. 10-km-long surface rupture with the south side down-thrown by 50 cm. Investigations of two trench sites perpendicular to the 1995 rupture suggest at least two prior large earthquakes in historical times. Radiocarbon dates and historical records constrain the age of events between 1500 bc and ad 53, event 2 possibly coinciding with the earthquake that damaged Dinar (the ancient city of Apamea Kibotos) in c. 80 bc and event 1 around 1500 bc. Surface displacements determined for events 1 and 2, compared to the 1995 surface faulting, indicate that M > 6.8 earthquakes were associated with each rupture. Using the total displacement in trenches, a slip rate of about 1 mm yr −1 can be estimated for the Dinar fault. Observations suggest that the return period for large earthquakes in the Dinar area is about 1500–2000 years. 相似文献
14.
Transition from subduction of normal to thickened oceanic crust occurs in the central portion of the Costa Rican margin, where large interplate earthquakes ( M ~ 7) and abundant interseismic seismicity have been associated with subduction of bathymetric highs. We relocated ~1,300 earthquakes recorded for 6 months by a combined on- and offshore seismological network using probabilistic earthquake relocation in a 3D P-wave velocity model. Most of the seismicity originated at the seismogenic zone of the plate boundary, appearing as an 18° dipping, planar cluster from 15 to 25–30 km depth, beneath the continental shelf. Several reverse focal mechanisms were resolved within the cluster. The upper limit of this interseismic interplate seismicity seems to be controlled primarily by the overlying-plate thickness and coherency, which in turn is governed by the erosional processes and fluid release and escape at temperatures lower than ~100 to 120 °C along the plate boundary. The downdip limit of the stick–slip behaviour collocates with relative low temperatures of ~150 to 200 °C, suggesting that it is controlled by serpentinization of the mantle wedge. The distribution of the interseismic interplate seismicity is locally modified by the presence of subducted seamounts at different depths. Unlike in northern Costa Rica, rupture of large earthquakes in the last two decades seems to coincide with the area defined by the interseismic interplate seismicity. 相似文献
15.
本文认为注水地震是相当复杂的。将注水只看成诱发因素,或将与注水相关的地震都看成构造地震是片面的。对注水过程的微震研究表明,注水可以直接造成地震。对油田地震的研究表明,大量采油造成地下介质的亏空同样可能造成地震。对其它一些地下矿藏的采掘也有类似的情况。错误地把与注水有关的地震都看成是注水诱发的构造地震,将导致对地壳构造活动特点的错误估计。 相似文献
16.
Late Pliocene–Pleistocene tectonic evolution of the Apennines is driven by progressive eastward migration of extensional downfaulting superposed onto the Late Miocene–Early Pliocene compressional thrust belt. This process has led to distinct structural domains that show decreasing transcrustal permeability from conditions of pervasive mixing between deep and surface fluids in the hinterland (west) to conditions of restricted fluid circulation and overpressuring in the foreland (east). At present, the highest rates of normal faulting and the strongest seismicity occur in the area bounded by stretched, highly permeable crust to the west and thick, poorly permeable crust to the east. In this area, the seismogenic sources of the largest earthquakes (5< Ms<7) are potentially related to mature normal faults that deeply penetrate thick brittle upper crust, and act as transient high-permeability channels during seismic activity. In this framework, it is plausible that domains of overpressuring govern progressive inception of normal faulting and fluid redistribution in the crust, leading to eastward migration of the belt of maximum seismicity with time. 相似文献
17.
Earthquakes result from tectonic processes, and their distribution is strongly influenced by large-scale geology and the tectonic stress field. However, earthquake hazard estimates, particularly ground motion recurrence, have traditionally been computed using source models based primarily on instrumental and historical seismicity. In areas of low to moderate seismicity such as Australia, large earthquakes commonly occur in areas which have experienced little or no recent activity, making it difficult to develop source models based solely on seismicity. The seismotectonic model developed for Australia that is presented here (AUS5) is based on geology, geophysics, tectonics and seismicity. The model was developed using a number of tiers of information, so that new information can easily be incorporated. The information used includes, but is not limited to, tectonic provinces, basins and ranges, gravity, magnetic, topography, and seismicity, all on a regional scale. On a local scale, for a site-specific earthquake hazard study, active faulting can be incorporated to provide fault source zones. An earthquake hazard map showing peak ground acceleration with a 10% chance of exceedance in 50 years for southeastern Australia using the geologically defined seismotectonic model AUS5 is presented as an indication of how the model performs. 相似文献
18.
Consolidation theory and concepts of rock failure can be used to evaluate the probable risk of induced seismicity as a result of filling of reservoirs. This evaluation indicates the safest way to fill a reservoir, and depends only on the geometry of the load, the rate of filling and the geological structures in the area. The stability function is actually a measure of the risk of having failure, with time, for a particular loading history in respect to a plane of weakness. The stability function is applied to the area of the Itzantun reservoir, which will be in southern Mexico. Drawdowns can increase the risk of triggering earthquakes in this area, which is prone to thrust faulting. It is possible to estimate the stresses after a period during which the water level is maintained and a decrease in stresses with the depth of the observation point. The estimates of the probable induced seismicity are limited as the residual stress in the area prior to the impounding is unknown. With a measure of the residual tectonic stress it will be possible to determine an optimal filling rate to reduce the probability of induced seismicity. 相似文献
19.
Seismicity induced by fluid perturbations became an important societal concern since felt earthquakes ( Mw up to 6) occurred after anthropogenic activities. In order to mitigate the risks associated with undesired seismicity, as well as to be able to use the micro-seismicity as a probe for in-depth investigation of fluid-driven processes, it is of crucial importance to understand the links between seismicity, fluid pressure and flow. We have developed a series of in-situ, decameter-scale experiments of fault zone reactivation by controlled fluid injection, in order to improve the near-source geophysical and hydromechanical observations. The deployed geophysical monitoring close to the injection allows one to cover the full frequency range of the fault responses from the static deformation to the very high-frequency seismic emissions (up to 4 kHz). Here, we focus on the microseismicity ( Mw ∼ –4 to –3) recorded during two fluid injection experiments in low-permeable shale and highly-fractured limestone formations. In both experiments, the spatio-temporal distribution of the seismic events, the energy balance, and the seismic velocity changes of the fractured medium show that most of the deformation does not actually emit seismic signals. The induced deformation is mainly aseismic. Based on these high-resolution multiparametric observations in the near-field, we therefore proposed a new model for injection-induced seismicity: the seismicity is not directly induced by the increasing fluid pressure, but it is rather triggered by the stress perturbations transferred from the aseismic motion caused by the injection. 相似文献
20.
We designed a new seismic source model for Italy to be used as an input for country-wide probabilistic seismic hazard assessment (PSHA) in the frame of the compilation of a new national reference map. We started off by reviewing existing models available for Italy and for other European countries, then discussed the main open issues in the current practice of seismogenic zoning. The new model, termed ZS9, is largely based on data collected in the past 10 years, including historical earthquakes and instrumental seismicity, active faults and their seismogenic potential, and seismotectonic evidence from recent earthquakes. This information allowed us to propose new interpretations for poorly understood areas where the new data are in conflict with assumptions made in designing the previous and widely used model ZS4. ZS9 is made out of 36 zones where earthquakes with Mw > = 5 are expected. It also assumes that earthquakes with Mw up to 5 may occur anywhere outside the seismogenic zones, although the associated probability is rather low. Special care was taken to ensure that each zone sampled a large enough number of earthquakes so that we could compute reliable earthquake production rates. Although it was drawn following criteria that are standard practice in PSHA, ZS9 is also innovative in that every zone is characterised also by its mean seismogenic depth (the depth of the crustal volume that will presumably release future earthquakes) and predominant focal mechanism (their most likely rupture mechanism). These properties were determined using instrumental data, and only in a limited number of cases we resorted to geologic constraints and expert judgment to cope with lack of data or conflicting indications. These attributes allow ZS9 to be used with more accurate regionalized depth-dependent attenuation relations, and are ultimately expected to increase significantly the reliability of seismic hazard estimates. 相似文献
|
