共查询到20条相似文献，搜索用时 78 毫秒
1.
2.
用米勒罗(Millero),罔萨雷斯(Gonzalez),沃德(Ward)(1976,Journal of Marine Research,34,61—93)还有波伊森(Poisson),布律内(Brunet),布伦—科坦(Brun—Cottan)(1980,Deep Sea Research,27,1013—1028)在温度0—40℃,盐度0.5—43时进行的密度测量值来确定新的一个大气压海水状态方程。方程的形式如下(t℃;S;ρkgm~(-3)) ρ=ρ_o AS BS~(3/2) CS~2 式中:A=8.24493×10~(-1)-4.0899×10~(-3)t 7.6438×10~(-5)t~2-8.2467×10~(-7)t~3 5.3875×10~(-9)t~4 B=-5.72466×10~(-3) 1.0227×10~(-4)t-1.6546×10~(-6)t~2 C=4.8314×10~(-4) ρ_o是水的密度(Bigg,1967,British Jonrnal fo Applied physics 8,521—537) ρ_o=999.842594 6.793952×10~(-2)t-9.095290×10~(-3)t~2 1.001685×10~(-4)t~3-1.120083×10~(-6)t~4 6.536332×10~(-9)t~5 方程的标准误差为3.6×10~(-3)kgm~(-3)。联合国教科文组织海洋学常用表及标准联合专家小组已推荐该方程为新的一个大气压海水状态方程。 相似文献
3.
本文介绍了一种改进的、原理简单的溶液密度测量装置——磁浮密度计,讨论了影响精密度和准确度的因素。该装置简单,操作简便,速度快,精密度、灵敏度分别为±2×10~(-6)、0.3×10~(-6),其准确度通过测定19.89℃时国际标准海水P105的密度得到了验证,我们的测定结果和别人的极好地一致。 相似文献
4.
用磁力浮沉子法溶液密度测量装置,在15—25℃之间的三个温度下测定了黄河口渤海湾36个站位海水样品(于1989年7月和1990年7月采集)的密度,发现所有实验测定值与根据其盐度和温度由1980年国际海水状态方程的计算值比较,均有明显的正偏差,此正偏差随海水盐度降低而增大。在黄河口渤海湾海水样品全部盐度范围内,已发现其海水密度正偏差与海水[Ca~(2+)]/s,[Mg~(2+)]/s,[SO_4~(2-)]/s之间呈指数曲线相关,而与碱度之间呈S形曲线相关,但在盐度25.72—31.57范围内都可近似看作直线相关。黄河口渤海湾海水的高碱度、高[Ca~(2+)]/s为其特征,这也是其密度正偏差的主要影响因素。本文还给出了计算黄河口及渤海湾海水密度的公式。 相似文献
5.
为了考察１９８０ 年国际标准海水状态方程在盐度小于０ ．５ 条件下的适用性,测定了０ ．０３９～２ ．０００ 盐度范围内的稀释大洋水的密度,并与状态方程的计算值作了比较。测定值与计算值之间的平均偏差为±０．６×１０－ ３ｋｇ／ｍ３ ,小于状态方程的标准偏差３．６ ×１０－ ３ｋｇ／ｍ３ 。结果认为１９８０ 年国际标准海水状态方程的低盐范围可以从现在的０．５ 继续扩展到０．０３９ 。 相似文献
6.
胶州湾海水中的钙和镁 总被引：2，自引：0，他引：2
于1989年10月28日在胶州湾的23个站位采集表层水样,对Ca、Mg及盐度、氯度、碱度等化学要素进行了测定,并用崂山水库水进行了稀释实验。结果表明,Ca/s,Mg/s均高于大洋水,其值分别为0.01250±7×10~(-4)和0.03728±1×10~(-4)。湾东北部的Ca,Mg均高于中部及湾口海域,这是湾东北部的工业废水及高盐卤水排放所致;CaCO_3(20℃)呈现过饱和状态。认为,ca,Mg有良好的保守性,低盐混合水样在放置过程中pH的下降可能与空气中CO_2的溶解有关,从而将引起ca,Mg含量的相对增高。 相似文献
7.
Ⅰ.硼的存在形式及去硼意义 据文献报道自来水中硼的含量为7×10~(-9)～0.2×10~(-6)g/L,海水中的含量为5×10~(-6)g/L,河水中的含量为13×10~(-6)g/L,地下水和卤水中的含量随各地而有所不同。在一般的水溶液中,硼以H_3BO_3,B(OH)_4~(-)形式存在,以H_3BO_3为主。硼酸是一元弱酸,是一种路 相似文献
8.
9.
东山湾海水盐度,温度和溶解氧的分布特征 总被引：1，自引：0，他引：1
1988年5月、8月、11月和1989年2月东山湾海水的盐度范围分别为20.81～33.89、30.43～34.24、26.76～30.59和30.27～31.57;水温范围分别为23.4～25.0、22.5～30.8、18.1～20.7和14.5～17.3℃;溶解氧体积分数分别为(4.12～4.91)×10~(-3)、(3.50～5.10)×10~(-3)、(5.21～6.68)×10~(-3)和(5.64～6.00)×10~(-3);氧饱和度分别为85.1%～104%、73.3%～116%、99.6%～124%和102%～104%。春、夏季东山湾受高盐外海水的影响明显,其中夏季可能还受到上升流的影响.秋季浮游植物大量生长和繁殖,成为溶解氧含量和氧饱和度的主要影响因素。 相似文献
10.
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
16.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics. 相似文献
20.