共查询到20条相似文献，搜索用时 343 毫秒
1.
Seismic activity associated with the subducting motion of the Philippine Sea plate beneath the Kanto district, Japan 总被引：1，自引：1，他引：1
Sadaki Hori 《Tectonophysics》2006,417(1-2):85
The Pacific plate and the Philippine Sea plate overlap and subduct underneath the Kanto region, central Japan, causing complex seismic activities in the upper mantle. In this research, we used a map selection tool with a graphic display to create a data set for earthquakes caused by the subducting motion of the Philippine Sea plate that are easily determined. As a result, we determined that there are at least four earthquake groups present in the upper mantle above the Pacific plate. Major seismic activity (Group 1) has been observed throughout the Kanto region and is considered to originate in the uppermost part of mantle in the subducted Philippine Sea plate, judging from the formation of the focal region and comparison with the 3D structure of seismic velocity. The focal mechanism of these earthquakes is characterized by the down-dip compression. A second earthquake layer characterized by down-dip extension (Group 2), below the earthquakes in this group, is also noted. The focal region for those earthquakes is considered to be located at the lower part of the slab mantle, and the Pacific plate located directly below is considered to influence the activity. Earthquakes located at the shallowest part (Group 3) form a few clusters distributed directly above the Group 1 focal region. Judging from the characteristics of later phases in these earthquakes and comparing against the 3D structure of seismic velocity, the focal regions for the earthquakes are considered to be located near the upper surface of the slab. Another earthquake group (Group 4) originates further below Group 2; it is difficult to consider these earthquakes within a single slab. The seismic activities representing the upper area of the Philippine Sea plate are Group 3. This paper proposes a slab geometry model that is substantially different from conventional models by strictly differentiating the groups. 相似文献
2.
Shinji Yoneshima Kimihiro Mochizuki Eiichiro Araki Ryota Hino Masanao Shinohara Kiyoshi Suyehiro 《Tectonophysics》2005,397(3-4):225-239
The Woodlark Basin, located south of the Solomon Islands arc region, is a young (5 Ma) oceanic basin that subducts beneath the New Britain Trench. This region is one of only a few subduction zones in the world where it is possible to study a young plate subduction of several Ma. To obtain the image of the subducting slab at the western side of the Woodlark Basin, a 40-day Ocean Bottom Seismometer (OBS) survey was conducted in 1998 to detect the micro-seismic activity. It was the first time such a survey had been performed in this location and over 600 hypocenters were located. The seismic activity is concentrated at the 10–60 km depth range along the plate boundary. The upper limit just about coincides with the leading edge of the accretionary wedge. The upper limit boundary was identified as the up-dip limit of the seismogenic zone, whereas the down-dip limit of the seismogenic zone was difficult to define. The dip angle of the plate at the high seismicity zone was found to average about 30°. Using the Cascadia subduction zone for comparison, which is a typical example of a young plate subduction, suggests that the subduction of the Woodlark Basin was differentiated by a high dip angle and rather landward location of the seismic front from the trench axis (30 km landward from the trench axis). Furthermore, as pointed out by previous researchers, the convergent margin of the Solomon Islands region is imposed with a high stress state, probably due to the collision of the Ontong Java Plateau and a rather rapid convergence rate (10 cm/year). The results of the high angle plate subduction and inner crust earthquakes beneath the Shortland Basin strongly support the high stress state. The collision of the Ontong Java Plateau, the relatively rapid convergence rate, and moderately cold slab as evidenced by low heat flow, rather than the plate age, may be dominantly responsible for the geometry of the seismogenic zone in the western part of the Woodlark Basin subduction zone. 相似文献
3.
The Great Lisbon earthquake of 1755 with an estimated magnitude of 8.5–9.0 is the most destructive earthquake in European history, yet the source region remains enigmatic. Recent geophysical data provide compelling evidence for an active east dipping subduction zone beneath the nearby Gibraltar Arc. Marine seismic data in the Gulf of Cadiz image active thrust faults in an accretionary wedge, above an east dipping decollement and an eastward dipping basement. Tomographic and other data support subduction and rollback of a narrow slab of oceanic lithosphere beneath the westward advancing Gibraltar block.Although, no instrumentally recorded seismicity has been documented for the subduction interface, we propose the hypothesis that this shallow east dipping fault plane is locked and capable of generating great earthquakes (like the Nankai or Cascadia seismogenic zones). We further propose this east dipping fault plane to be a candidate source for the Great Lisbon earthquake of 1755. In this paper we use all available geophysical data on the deep structure of the Gulf of Cadiz–Gibraltar region for the purpose of constraining the 3-D geometry of this potentially seismogenic fault plane. To this end, we use new depth processed seismic data, have interpreted all available published and unpublished time sections, examine the distribution of hypocenters and perform 2-D gravity modeling. Finally, a finite-element model of the forearc thermal structure is constructed to determine the temperature distribution along the fault interface and thus the thermally predicted updip and downdip limits of the seismogenic zone. 相似文献
4.
青藏高原板内地震震源深度分布规律及其成因 总被引：6，自引：0，他引：6
青藏高原板内地震以浅源地震为主, 下地壳基本上没有地震, 地震震源多集中在15~40 km的深度范围, 主要在中地壳内, 呈似层状弥散分布.其中30~33 km深度是一个优势层, 与壳内分层有关.总体上青藏高原南、北部的震源面略呈相向倾斜特征.70~100 km深度区间出现了比较集中的震级较小的地震, 可能与壳幔过渡带的拆离作用有关.高原内部的正断层系与板内地震密切相关, 是板内浅源地震的主控构造.总之, 青藏高原地震震源沿着活动的上地壳脆性层与软弱层之间的脆-韧性过渡带分布.这些板内地震活动属于大陆动力学过程, 与板块碰撞和板块俯冲无关.初步认为青藏高原浅层到深层多震层的成因分别是韧性基底与脆性盖层、韧性下地壳与脆性上地壳、韧性下地壳与脆性上地幔的韧-脆性转换、拆离和解耦的产物. 相似文献
5.
Temporary local seismic networks were installed in western Crete, in central Crete, and on the island Gavdos south of western Crete, respectively, in order to image shallow seismically active zones of the Hellenic subduction zone.More than 4000 events in the magnitude range between −0.5 and 4.8 were detected and localized. The resulting three-dimensional hypocenter distribution allows the localization of seismically active zones in the area of western and central Crete from the Mediterranean Ridge to the Cretan Sea. Furthermore, a three-dimensional structural model of the studied region was compiled based on results of wide-angle seismics, surface wave analysis and receiver function studies. The comparison of the hypocenter distribution and the structure has allowed intraplate and interplate seismicity to be distinguished.High interplate seismicity along the interface between the subducting African lithosphere and the Aegean lithosphere was found south of western Crete where the interface is located at about 20 to 40 km depth. An offset between the southern border of the Aegean lithosphere and the southern border of active interplate seismicity is observed. In the area of Crete, the offset varies laterally along the Hellenic arc between about 50 and 70 km.A southwards dipping zone of high seismicity within the Aegean lithosphere is found south of central Crete in the region of the Ptolemy trench. It reaches from the interface between the plates at about 30 km depth towards the surface. In comparison, the Aegean lithosphere south of western Crete is seismically much less active including the region of the Ionian trench. Intraplate seismicity within the Aegean plate beneath Crete and north of Crete is confined to the upper about 20 km. Between 20 and 40 km depth beneath Crete, the Aegean lithosphere appears to be seismically inactive. In western Crete, the southern and western borders of this aseismic zone correlate strongly with the coastline of Crete. 相似文献
6.
Slab break-off is a plate-tectonic process which does not only return lithospheric material into the deeper mantle, but also has severe effects on surface movements and seismic hazard: slab-pull induced seismicity is reduced when the subducted slab decouples from the overlying crust. In the Vrancea region (SE Carpathians), strong earthquakes frequently occur at intermediate depths (70–180 km) in a laterally small volume, while the crust shows low but distributed seismicity. The stress pattern shows similar partitioning with vertical extension in the slab and no preferred orientation in the overlying crust. Both features indicate a decoupling between slab and overlying crust, either by slab break-off or delamination. However, the strong vertical elongation of the slab requires that the upper end of the slab is fixed vertically. Thus, a 'soft' coupling is assumed that is strong enough to enable elongation of the slab, but weak enough to inhibit 'quasi-static' stress transfer to the overlying crust. 相似文献
7.
Advances in earthquake data acquisition and processing techniques have allowed for improved quantification of source parameters for local Australian earthquakes. Until recently, only hypocentral locations and local magnitudes (ML) had been determined routinely, with little attention given to the inversion of additional source parameters. The present study uses these new source data (e.g. seismic moment, stress drop, source dimensions) to further extend our understanding of seismicity and the continental stress regime of the Australian landmass and its peripheral regions.
Earthquake activity within Australia is typically low, and the proportion of small to large events (i.e. the b value) is also low. It is observed that average stress drops for southeastern Australian earthquakes appear to increase with seismic moment to relatively high levels, up to approximately 10 MPa for ML 5.0 earthquakes. This is thought to be indicative of high compressive crustal stress, coupled with strong rocks and fault asperities. Furthermore, the data indicates that shallow focus earthquakes (shallower than 6 km) appear to produce lower than average stress drops than deeper earthquakes (between 6 and 20 km) with similar moment.
Recurrence estimates were obtained for a discrete seismogenic zone in southeastern Australia. Decreasing b values with increasing focal depth for this zone indicate that larger earthquakes (with high stress drops) tend to occur deeper in the crust. This may offer an explanation for the apparent increase of stress drop with hypocentral depth. Consequently, earthquake hazard estimates that assume a uniform Gutenburg–Richter distribution with depth (i.e. constant b value) may be too conservative and therefore slightly overestimate seismic hazard for surface sites in southeastern Australia. 相似文献
8.
A detailed three-dimensional (3-D) P-wave velocity model of the crust and uppermost mantle under the Chinese capital (Beijing) region is determined with a spatial resolution of 25 km in the horizontal direction and 4–17 km in depth. We used 48,750 precise P-wave arrival times from 2973 events of local crustal earthquakes, controlled seismic explosions and quarry blasts. These events were recorded by a new digital seismic network consisting of 101 seismic stations equipped with high-sensitivity seismometers. The data are analyzed by using a 3-D seismic tomography method. Our tomographic model provides new insights into the geological structure and tectonics of the region, such as the lithological variations and large fault zones across the major geological terranes like the North China Basin, the Taihangshan and the Yanshan mountainous areas. The velocity images of the upper crust reflect well the surface geological and topographic features. In the North China Basin, the depression and uplift areas are imaged as slow and fast velocities, respectively. The Taihangshan and Yanshan mountainous regions are generally imaged as broad high-velocity zones, while the Quaternary intermountain basins show up as small low-velocity anomalies. Velocity changes are visible across some of the large fault zones. Large crustal earthquakes, such as the 1976 Tangshan earthquake (M=7.8) and the 1679 Sanhe earthquake (M=8.0), generally occurred in high-velocity areas in the upper to middle crust. In the lower crust to the uppermost mantle under the source zones of the large earthquakes, however, low-velocity and high-conductivity anomalies exist, which are considered to be associated with fluids. The fluids in the lower crust may cause the weakening of the seismogenic layer in the upper and middle crust and thus contribute to the initiation of the large crustal earthquakes. 相似文献
9.
《Gondwana Research》2010,17(3-4):370-400
A dense nationwide seismic network recently constructed in Japan has been yielding large volumes of high-quality data that have made it possible to investigate the seismic structure in the Japanese subduction zone with unprecedented resolution. In this article, recent studies on the subduction of the Philippine Sea and Pacific plates beneath the Japanese Islands and the mechanism of earthquake and magma generation associated with plate subduction are reviewed. Seismic tomographic studies have shown that the Philippine Sea plate subducting beneath southwest Japan is continuous throughout the entire region, from Kanto to Kyushu, without disruption or splitting even beneath the Izu Peninsula as suggested in the past. The contact of the Philippine Sea plate with the Pacific plate subducting below has been found to cause anomalously deep interplate and intraslab earthquake activity in Kanto. Detailed waveform inversion studies have revealed that the asperity model is applicable to interplate earthquakes. Analyses of dense seismic and GPS network data have confirmed the existence of episodic slow slip accompanied in many instances by low-frequency tremors/earthquakes on the plate interface, which are inferred to play an important role in stress loading at asperities. High-resolution studies of the spatial variation of intraslab seismicity and the seismic velocity structure of the slab crust strongly support the dehydration embrittlement hypothesis for the generation of intraslab earthquakes. Seismic tomography studies have shown that water released by dehydration of the slab and secondary convection in the mantle wedge, mechanically induced by slab subduction, are responsible for magma generation in the Japanese islands. Water of slab origin is also inferred to be responsible for large anelastic local deformation of the arc crust leading to inland crustal earthquakes that return the arc crust to a state of spatially uniform deformation. 相似文献
10.
Takashi Iidaka Tetsuya Takeda Eiji Kurashimo Tomonori Kawamura Yoshiyuki Kaneda Takaya Iwasaki 《Tectonophysics》2004,388(1-4):7
A seismic experiment with six explosive sources and 391 seismic stations was conducted in August 2001 in the central Japan region. The crustal velocity structure for the central part of Japan and configuration of the subducting Philippine Sea plate were revealed. A large lateral variation of the thickness of the sedimentary layer was observed, and the P-wave velocity values below the sedimentary layer obtained were 5.3–5.8 km/s. P-wave velocity values for the lower part of upper crust and lower crust were estimated to be 6.0–6.4 and 6.6–6.8 km/s, respectively. The reflected wave from the upper boundary of the subducting Philippine Sea plate was observed on the record sections of several shots. The configuration of the subducting Philippine Sea slab was revealed for depths of 20–35 km. The dip angle of the Philippine Sea plate was estimated to be 26° for a depth range of about 20–26 km. Below this depth, the upper boundary of the subducting Philippine Sea plate is distorted over a depth range of 26–33 km. A large variation of the reflected-wave amplitude with depth along the subducting plate was observed. At a depth of about 20–26 km, the amplitude of the reflected wave is not large, and is explained by the reflected wave at the upper boundary of the subducting oceanic crust. However, the reflected wave from reflection points deeper than 26 km showed a large amplitude that cannot be explained by several reliable velocity models. Some unique seismic structures have to be considered to explain the observed data. Such unique structures will provide important information to know the mechanism of inter-plate earthquakes. 相似文献
11.
It is important to know the shape of a subducting slab in order to understand the mechanisms of inter-plate earthquakes and the process of subduction. Seismicity data and converted phases have been used to detect plate boundaries. The configuration of the Philippine Sea slab has been obtained at the western part of southwestern Japan. At the eastern part of southwestern Japan, however, the configuration of the Philippine Sea slab has not yet been confirmed. A spatially high-density seismic network makes it possible to detect the boundaries of the Philippine Sea slab. We used a spatially high-density temporal seismic array in the area. The configuration of the Philippine Sea plate is obtained at the eastern part of southwestern Japan using the temporal seismic array and permanent seismic network data and comparing the seismic structure obtained from the results of refraction surveys. The configuration of the Philippine Sea plate obtained by this study does not bend sharply compared to previous models obtained from receiver function analyses. We delineated the upper boundary of the slab to a depth of about 45 km. The weak image of the boundary, which corresponds to the upper mantle reflector beneath the source area of the 2000 Western Tottori earthquake, was detected using the spatially dense array. 相似文献
12.
S. Buske S. Lüth H. Meyer R. Patzig C. Reichert S. Shapiro P. Wigger M. Yoon 《Tectonophysics》2002,350(4):93-282
In this paper, we present a compilation of modern seismic and seismological methods applied to image the subduction process in North Chile, South America. We use data from active and passive seismic experiments that were acquired within the framework of the German Collaborative Research Center SFB267 ‘Deformation Processes in the Andes’. The investigation area is located between 20° and 25°S and extends from the trench down to 100 km depth. In the depth range between the sea bottom and 15 km, we process an offshore seismic reflection profile using a recently developed velocity-model-independent stacking procedure. We find that the upper part of the subducting oceanic lithosphere in this depth range is characterized by a horst-and-graben structure. This structure supports an approximately 3 km thick coupling zone between the plates. In the depth range between 15 and 45 km, we analyse the spatial distribution of aftershocks of the Antofagasta earthquake (1995). The aftershock hypocenters are concentrated in an approximately 3 km thick layer. Finally, in the depth range between 45 and 100 km, we apply Kirchhoff prestack depth migration to the onshore ANCORP profile. A double reflection zone is observed between 45 and 60 km depth, which may represent the upper and lower boundary of the subducted oceanic crust. Over the whole range down to more than 80–90 km depth, we obtain an image of the subducting slab. At that depth, the hypocenters of local earthquakes deviate significantly in the direction perpendicular to the slab face from the reflective parts of the slab. Consequently, our results yield a complete seismic image of the downgoing plate and the associated seismic coupling zone. 相似文献
13.
Junichi Nakajima Yusuke Tsuji Akira Hasegawa Saeko Kita Tomomi Okada Toru Matsuzawa 《Gondwana Research》2009,16(3-4):470-481
We estimate detailed three-dimensional seismic velocity structures in the subducting Pacific slab beneath Hokkaido, Japan, using a large number of arrival-time data from 6902 local earthquakes. A remarkable low-velocity layer with a thickness of ~ 10 km is imaged at the uppermost part of the slab and is interpreted as hydrated oceanic crust. The layer gradually disappears at depths of 70–80 km, suggesting the breakdown of hydrous minerals there. We find prominent low-velocity anomalies along the lower plane of the double seismic zone and above the aftershock area of the 1993 Kushiro-oki earthquake (M7.8). Since seismic velocities of unmetamorphosed peridotite are much higher than the observations, hydrous minerals are expected to exist in the lower plane as well as the hypocentral area of the 1993 earthquake. On the other hand, regions between the upper and lower planes, where seismic activity is not so high compared to the both planes, show relatively high velocities comparable to those of unmetamorphosed peridotite. Our observations suggest that intermediate-depth earthquakes occur mainly in regions with hydrous minerals, which support dehydration embrittlement hypothesis as a cause of earthquake in the subducting slab. 相似文献
14.
Tomographic evidence for the subducting oceanic crust and forearc mantle serpentinization under Kyushu, Japan 总被引：1，自引：0，他引：1
We determined high-resolution three-dimensional P- and S-wave velocity (Vp, Vs) structures beneath Kyushu in Southwest Japan using 177,500 P and 174,025 S wave arrival times from 8515 local earthquakes. A Poisson's ratio structure was derived from the obtained Vp and Vs values. Our results show that significant low-Vp, low-Vs and high Poisson's ratio zones are extensively distributed along the volcanic front in the uppermost mantle, which extend and dip toward the back-arc side in the mantle wedge. In the crust, low-Vp, low-Vs and high Poisson's ratio anomalies exist beneath the active volcanoes. The subducting Philippine Sea slab is clearly imaged as a high-Vp, high-Vs and low Poisson's ratio zone from the Nankai Trough to the back-arc. A thin low-velocity zone is detected above the subducting Philippine Sea slab in the mantle wedge, and earthquakes in the upper mantle are distributed along the transition zone between this thin low-velocity zone and the high-velocity Philippine Sea slab, which may imply that oceanic crust exists on the top of the slab and the forearc mantle wedge is serpentinized due to the slab dehydration. The seismic velocity of the subducting oceanic crust with basaltic or gabbroic composition is lower than that of the mantle according to the previous studies. The serpentinization process could also dramatically reduce the seismic velocity in the forearc mantle wedge. 相似文献
15.
Seiichi Miura Narumi Takahashi Ayako Nakanishi Tetsuro Tsuru Shuichi Kodaira Yoshiyuki Kaneda 《Tectonophysics》2005,407(3-4):165-188
The Japan Trench subduction zone, located east of NE Japan, has regional variation in seismicity. Many large earthquakes occurred in the northern part of Japan Trench, but few in the southern part. Off Miyagi region is in the middle of the Japan Trench, where the large earthquakes (M > 7) with thrust mechanisms have occurred at an interval of about 40 years in two parts: inner trench slope and near land. A seismic experiment using 36 ocean bottom seismographs (OBS) and a 12,000 cu. in. airgun array was conducted to determine a detailed, 2D velocity structure in the forearc region off Miyagi. The depth to the Moho is 21 km, at 115 km from the trench axis, and becomes progressively deeper landward. The P-wave velocity of the mantle wedge is 7.9–8.1 km/s, which is typical velocity for uppermost mantle without large serpentinization. The dip angle of oceanic crust is increased from 5–6° near the trench axis to 23° 150 km landward from the trench axis. The P-wave velocity of the oceanic uppermost mantle is as small as 7.7 km/s. This low-velocity oceanic mantle seems to be caused by not a lateral anisotropy but some subduction process. By comparison with the seismicity off Miyagi, the subduction zone can be divided into four parts: 1) Seaward of the trench axis, the seismicity is low and normal fault-type earthquakes occur associated with the destruction of oceanic lithosphere. 2) Beneath the deformed zone landward of the trench axis, the plate boundary is characterized as a stable sliding fault plain. In case of earthquakes, this zone may be tsunamigenic. 3) Below forearc crust where P-wave velocity is almost 6 km/s and larger: this zone is the seismogenic zone below inner trench slope, which is a plate boundary between the forearc and oceanic crusts. 4) Below mantle wedge: the rupture zones of thrust large earthquakes near land (e.g. 1978 off Miyagi earthquake) are located beneath the mantle wedge. The depth of the rupture zones is 30–50 km below sea level. From the comparison, the rupture zones of large earthquakes off Miyagi are limited in two parts: plate boundary between the forearc and oceanic crusts and below mantle wedge. This limitation is a rare case for subduction zone. Although the seismogenic process beneath the mantle wedge is not fully clarified, our observation suggests the two possibilities: earthquake generation at the plate boundary overridden by the mantle wedge without serpentinization or that in the subducting slab. 相似文献
16.
In this paper, we show the seismicity of the past 20 years that occurred in Italy and surrounding regions. Hypocentral locations have been obtained by using P- and S-wave arrival times from the INGV national and several regional permanent seismic networks. More than 48,000 events, selected from an original data set of about 99,780, are used to reconstruct the most complete seismic picture of the Italian region so far. The seismicity distribution allows inference on seismotectonics of this complex region of subduction versus continental collision. Our results clearly reveal the geometry of the Adria and the Ionian subduction and a continuous normal fault belt in the upper crust, following the Apennines mountain range. The depth of the seismogenic layer is computed from the cut-off of seismicity at depth and shows large variations along and across the seismic active regions. Earthquakes are generated by the different velocity of slab retreat and the subsequent asthenospheric upwelling. 相似文献
17.
Akio Yoshida Kohji Hososno Toshimitsu Tsukakoshi Akio Kobayashi Hiromi Takayama Stefan Wiemer 《Tectonophysics》2006,417(1-2):17
We investigate the relationship between changes in seismicity and crustal deformations in the Tokai region. We describe how seismicity in the subducted slab increased remarkably in the fall of 2000 and decreased in the fall of 2001, while in contrast, the crust seismicity decreased in the fall of 2000 and increased in the fall of 2001. We note that the trend of horizontal displacement at GPS stations changed coincidentally and we propose interpreting the increase and decrease in seismic activities and the changes in crustal deformations in a unified way based on changes in the state of the interplate coupling, i.e., the back-slip rate was reduced in the fall of 2000 and was partially restored in the fall of 2001. We explain why reduction of the back-slip rate increases seismogenic stress in the slab and decreases stress in the crust. We also describe the substantial positive dilatation observed in the region around Mt. Fuji in the fall of 2000 and suggest that the remarkable increase of low-frequency earthquakes beneath Mt. Fuji in October 2000 may have been caused by deceleration of the converging motion of the Izu micro-plate with the Eurasian plate. The decrease of the subduction velocity of the Izu micro-plate on the Suruga Trough in late 2000 would also have contributed to weakening of the interplate coupling beneath the Tokai region, since reduction of the relative velocity between overriding and subducting plates produces the same effect on the plate interface as a diminishing back-slip rate. However, subduction of the Izu micro-plate on the Suruga Trough was accelerated in early 2003, which may have caused increases in both slab and crust seismicities in that period. 相似文献
18.
大陆浅源地震震源空间分布可以看作是一种地球物理特征,大量震源的空间位置数据可用来刻划大陆地壳结构。通过研究南北地震带南段震源的空间分布特征,发现研究区震源深度分布在横向上的疏密变化与地质构造特征相对应。剖面震源分布等密度图显示,中、下地壳不同深度广泛分布着多震层。多震层的分布与地壳低速、低阻层具有相关性,多震层一般位于低速、低阻层的上方。中地壳层次的低速、低阻层很可能是壳内滑脱层,是韧性下地壳与脆性上地壳发生拆离解耦的构造层次;下地壳低速、低阻层是部分熔融、含流体的韧性流变层;壳内多震层的构造属性应是上地壳硬的脆性层,容易发生突然破裂,产生地震。低速、低阻层是大陆板块内部上地壳脆性层构造过程的主控因素,包括对大陆内部浅源地震的控制;因此,在低速、低阻层之上往往形成多震层,越是活动性强的低速、低阻层,其上多震层震源密度越高。南北地震带南段不同层圈和块体之间的差异运动控制了其地壳层次的构造活动,包括大量地震的发生,其中,下地壳流层与上地壳脆性层的差异运动在中地壳层次发生剪切拆离是最重要的因素。 相似文献
19.
We summarize seismogenic structures in four regions of active convergence, each at a different stage of the collision process, with particular emphases on unusual, deep-seated seismogenic zones that were recently discovered. Along the eastern Hellenic arc near Crete, an additional seismogenic zone seems to occur below the seismogenic portion of the interplate thrust zone—a configuration found in several other oblique subduction zones that terminate laterally against collision belts. The unusual earthquakes show lateral compression, probably reflecting convergence between the subducting lithosphere's flank and the collision zone nearby. Along oblique zones of recent collision, the equivalence between space and time reveals the transition from subduction to full collision. In particular, intense seismicity beneath western Taiwan indicates that along the incipient zone of arc–continent collision, major earthquakes occur along high-angle reverse faults that reach deep into the crust or even the uppermost mantle. The seismogenic structures are likely to be reactivated normal faults on the passive continental margin of southeastern China. Since high-angle faults are ineffective in accommodating horizontal motion, it is not surprising that in the developed portion of the central Taiwan orogen (<5 Ma), seismogenic faulting occurs mainly along moderate-dipping (20–30°) thrusts. This is probably the only well-documented case of concurrent earthquake faulting on two major thrust faults, with the second seismogenic zone reaching down to depths of 30 km. Furthermore, the dual thrusts are out-of-sequence, being active in the hinterland of the deformation front. Along the mature Himalayan collision zone, where collision initiated about 50 Ma ago, current data are insufficient to distinguish whether most earthquakes occurred along multiple, out-of-sequence thrusts or along a major ramp thrust. Intriguingly, a very active seismic zone, including a large (Mw=6.7) earthquake in 1988, occurs at depths near 50 km beneath the foreland. Such a configuration may indicate the onset of a crustal nappe, involving the entire cratonic crust. In all cases of collision discussed here, the basal decollement, a key feature in the critical taper model of mountain building, appears to be aseismic. It seems that right at the onset of collision, earthquakes reflect reactivation of high-angle faults. For mature collision belts, earthquake faulting on moderate-dipping thrust accommodates a significant portion of convergence—a process involving the bulk of crust and possibly the uppermost mantle. 相似文献
20.
海原-六盘山断裂是青藏高原东北缘的大型边界断裂带,是中国大陆典型的地震危险区。地壳构造加载特征的定量研究有助于分析区域孕震环境,参考青藏高原东北缘GPS形变和岩石圈精细结构等资料,本文建立海原-六盘山断裂带周缘的三维岩石圈分层模型,分析现今构造加载作用下区域地壳形变和应力演化特征。数值计算结果显示:青藏高原东北缘现今处于以北东-南西向的水平挤压为主导和北西-南东向的水平引张的变形特征。青藏高原东北缘中-下地壳流变性质影响上覆脆性地壳应力环境,中地壳较低粘滞系数对应的模型地壳应力计算值与研究区实际地壳应力场相近。海原断裂中-西段构造加载作用显著,具有相对较高的库仑应力积累和最大剪应力分布;而六盘山断裂周缘地壳应力和最大剪应力小于海原断裂带。构造应力积累的空间分布差异说明六盘山断裂具有较弱的构造孕震环境,而研究区走滑型断裂的孕震加载作用显著。尽管六盘山处于较低的应力状态,但仍不能轻易忽视其长期存在的强震空区所暗示的发震潜力。 相似文献