首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 550 毫秒
1.
Nearly half a century after mine closure, release of As from the Ylöjärvi Cu–W–As mine tailings in groundwater and surface water run-off was observed. Investigations by scanning electron microscopy (SEM), electron microprobe analysis (EMPA), synchrotron-based micro-X-ray diffraction (μ-XRD), micro-X-ray absorption near edge structure (μ-XANES) and micro-extended X-ray absorption fine structure (μ-EXAFS) spectroscopy, and a sequential extraction procedure were performed to assess As attenuation mechanisms in the vadose zone of this tailings deposit. Results of SEM, EMPA, and sequential extractions indicated that the precipitation of As bearing Fe(III) (oxy)hydroxides (up to 18.4 wt.% As2O5) and Fe(III) arsenates were important secondary controls on As mobility. The μ-XRD, μ-XANES and μ-EXAFS analyses suggested that these phases correspond to poorly crystalline and disordered As-bearing precipitates, including arsenical ferrihydrite, scorodite, kaňkite, and hydrous ferric arsenate (HFA). The pH within 200 cm of the tailings surface averaged 5.7, conditions which favor the precipitation of ferrihydrite. Poorly crystalline Fe(III) arsenates are potentially unstable over time, and their transformation to ferrihydrite, which contributes to As uptake, has potential to increase the As adsorption capacity of the tailings. Arsenic mobility in tailings pore water at the Ylöjärvi mine will depend on continued arsenopyrite oxidation, dissolution or transformation of secondary Fe(III) arsenates, and the As adsorption capacity of Fe(III) (oxy)hydroxides within this tailings deposit.  相似文献   

2.
The JEB Tailings Management Facility (TMF) is central to reducing the environmental impact of the McClean Lake uranium mill facility that is operated by AREVA Resources Canada. This facility has been designed around the idea that elements of concern (e.g., U, As, Ni, Se, Mo) will be controlled through equilibrium with precipitants. Confirming the presence of calcium-containing carbonates in the JEB TMF is the first step in determining if gypsum (CaSO4·2H2O) controls the concentration of HCO3− (aq), limiting the formation of soluble uranyl bicarbonate complexes. A combination of X-ray diffraction (XRD), X-ray absorption near-edge spectroscopy (XANES), and microprobe X-ray fluorescence (XRF) mapping was used to analyze a series of tailings samples from the JEB TMF. Calcium carbonate in the form of calcite (CaCO3), aragonite (CaCO3), and dolomite (CaMg(CO3)2) were identified by analysing Ca K-edge μ-XANES spectra coupled with microprobe XRF mapping. This is the first observation of these phases in the JEB TMF. The combination of μ-XANES and XRF mapping provided a greater sensitivity to low concentration calcium species compared to the other techniques used, which were only sensitive to the major species present (e.g., gypsum).  相似文献   

3.
《Applied Geochemistry》2003,18(11):1733-1750
The Rabbit Lake U mine in-pit tailings management facility (TMF) (425 m long×300 m wide×91 m deep) is located in northern Saskatchewan, Canada. The objectives of this study were to quantify the distribution of As phases in the tailings and evaluate the present-day geochemical controls on dissolved As. These objectives were met by analyzing pore fluid samples collected from the tailings body for dissolved constituents, measuring Eh, pH, and temperature of tailings core and pore fluid samples, conducting sequential extractions on solid samples, conducting geochemical modeling of pore fluid chemistry using available thermodynamic data, and by reviewing historical chemical mill process records. Dissolved As concentrations in 5 monitoring wells installed within the tailings body ranged from 9.6 to 71 mg/l. Pore fluid in the wells had a pH between 9.3 and 10.3 and Eh between +58 and +213 mV. Sequential extraction analyses of tailings samples showed that the composition of the solid phase As changed at a depth of 34 m. The As above 34 m was primarily associated with amorphous Fe and metal hydroxides while the As below 34 m was associated with Ca, likely as amorphous poorly ordered calcium arsenate precipitates. The change in the dominant As solid phases at this depth was attributed to the differences in the molar ratio of Fe to As in the mill tailings. Below 34 m it was <2 whereas above 34 m it was >4. The high Ca/As ratio during tailings neutralization would likely precipitate Ca4(OH)2(AsO4)2:4H2O type Ca arsenate minerals. Geochemical modeling suggested that if the pore fluids were brought to equilibrium with this Ca-arsenate, the long-term dissolved As concentrations would range between 13 and 126 mg/l.  相似文献   

4.
《Applied Geochemistry》2000,15(8):1097-1119
The Rabbit Lake U mine in-pit tailings management facility (TMF) is located in northern Saskatchewan, Canada. The tailings body is approximately 425 m long×300 m wide and 91 m thick at its centre. An investigation of the TMF was performed to collect tailings samples from depth to quantify the distribution of As and Ni in the tailings with respect to ore type and assess the distribution of As and Ni with respect to tailings mineralogy. The tailings body consists of alternating layers of ice, frozen tailings and unfrozen tailings which varied in texture from a slurry to a firm silty sand. The tailings solids are predominately composed of quartz (16–36%), calcium sulphate (0.3–54%) and illite (3 and 14%). Arsenic and Ni concentrations in the tailings show similar patterns with depth which were strongly related to historical changes in As and Ni concentrations in the mill feed. Mineralogy of the ore bodies indicated that As and Ni in the mill feed occurred primarily as 1:1 molar ratio arsenides such as niccolite and gersdorffite. Arsenic and Ni concentrations in the tailings were also measured at a near 1:1 molar ratio. Mill process records showed that an average of 71% of the As in the mill feed was solubilized during leaching. SEM analysis suggested that solubilized As is precipitated as Ca2+, Fe3+ and Ni2+ arsenates during the neutralization process. Mill records indicated that 17,000 tonnes of As were discharged to the TMF of which approximately 88% was as arsenates and 12% as primary arsenides.  相似文献   

5.
Models of geochemical controls on elements of concern (EOCs; e.g., As, Se, Mo, Ni) in U tailings are dominated by ferrihydrite. However, the evolution of aqueous concentrations of Al and Mg through the Key Lake (KL) U mill bulk neutralization process indicates that secondary Al and Mg minerals comprise a large portion of the tailings solids. X-ray diffraction, Al K-edge XAS, and TEM elemental mapping of solid samples collected from a pilot-scale continuous-flow synthetic raffinate neutralization system of the KL mill indicate the secondary Al–Mg minerals present include Mg–Al hydrotalcite, amorphous Al(OH)3, and an amorphous hydrobasaluminite-type phase. The ferrihydrite present contains Al and may be more accurately described as Al–Fe(OH)3. In the final combined tailings sample (pH 10.5) collected from the model experiments using raffinate with Al, Mg, and Fe, solid phase EOCs were associated with Al–Fe(OH)3 and Mg–Al hydrotalcite. In model experiments using raffinate devoid of Fe, aqueous EOC concentrations decreased greatly at pH 4.0 (i.e., where ferrihydrite would precipitate) and largely remained in the solid phase when increased to the terminal pH of 10.5; this suggests Al–Mg minerals can control aqueous concentrations of EOCs in the raffinate in the absence of Fe. Maximum adsorption capacities for individual and mixtures of adsorbates by Mg–Al hydrotalcite were determined. A revised model of the geochemical controls in U mill tailings is presented in which Al and Mg minerals co-exist with Fe minerals to control EOC concentrations.  相似文献   

6.
Detailed field sampling and analyses and laboratory-based diffusion-cell experiments were used in conjunction with 3-D reactive transport modeling (MODFLOW and MT3D99) to quantify the fate and long-term (10 ka) transport of As in the Rabbit Lake In-pit Tailings Management Facility (RLITMF), northern Saskatchewan, Canada. The RLITMF (300 m × 425 m × 90 m thick) was engineered to ensure solute transport within the RLITMF is dominated by diffusion. Concentrations of As in the tailings pore fluids ranged from 0.24 to 140 mg/L (n = 43). Arsenic speciation analyses indicate 90% of this arsenic exists as As5+. This observation is supported by pH–Eh measurements of pore fluids (n = 135). Geochemical analyses yielded a strong inverse correlation between the Fe/As molar ratio in the tailings solids and the corresponding concentration of dissolved As, which is attributed to the adsorption of As to secondary 2-line ferrihydrite present in the tailings. Diffusion-cell testing yielded values for the effective diffusion coefficient, sorption coefficient, and effective porosity of As in the tailings of 4.5 × 10−10 m2/s, 2–4 cm3/g and 0.36, respectively. Reactive transport simulations using the field and laboratory data show adsorption of As to the tailings and diffusive transport of dissolved As in the tailings should reduce the source term concentration of As to between 40% and 70% of the initial concentrations over the 10 ka simulation period. Based on these simulations, the As concentrations in the regional groundwater, 50 m down gradient of the tailings facility, should be maintained at background concentrations of 0.001 mg/L over the 10 ka period. These findings suggest the engineered in-pit disposal of U mine tailings can provide long-term protection for the local groundwater regime from As contamination.  相似文献   

7.
As- and Mo- bearing secondary mineral phases formed during the neutralization of uranium mill wastes require characterization. Previous studies indicate that arsenate and molybdate adsorbed to ferrihydrite are the dominant controls in the tailings materials. A lab-scale plant was employed to characterize secondary precipitates from a variety of ore blends. Through total elemental analysis of precipitates and As and Mo K-edge X-ray absorption spectroscopy, different ratios of contributing phases were determined for each pH stage (4.2, 6.5, and 9.2) of the neutralization process. Overall, arsenate adsorbed to ferrihydrite was the dominant As mineral phase regardless of pH or sample blend (53–77%), with fractional contribution from ferric arsenates, and adsorption to aluminum phases. Molybdate adsorbed to ferrihydrite was the dominant Mo mineral phase, with fractional contribution decreasing with increasing pH (100–69%). The characterization of these phases in the secondary precipitates provides further understanding of the contributing mineral species in tailing facilities.  相似文献   

8.
《Geochimica et cosmochimica acta》1999,63(19-20):3379-3394
The proposed JEB Tailings Management Facility (TMF) to be emplaced below the groundwater table in northern Saskatchewan, Canada, will contain uranium mill tailings from McClean Lake, Midwest and Cigar Lake ore bodies, which are high in arsenic (up to 10%) and nickel (up to 5%). A serious concern is the possibility that high arsenic and nickel concentrations may be released from the buried tailings, contaminating adjacent groundwaters and a nearby lake. Laboratory tests and geochemical modeling were performed to examine ways to reduce the arsenic and nickel concentrations in TMF porewaters so as to minimize such contamination from tailings buried for 50 years and longer. The tests were designed to mimic conditions in the mill neutralization circuit (3 hr tests at 25°C), and in the TMF after burial (5–49 day aging tests). The aging tests were run at, 50, 25 and 4°C (the temperature in the TMF). In order to optimize the removal of arsenic by adsorption and precipitation, ferric sulfate was added to tailings raffinates1 having Fe/As ratios of less that 3–5. The acid raffinates were then neutralized by addition of slaked lime to nominal pH values of 7, 8, or 9.Analysis and modeling of the test results showed that with slaked lime addition to acid tailings raffinates, relatively amorphous scorodite (ferric arsenate) precipitates near pH 1, and is the dominant form of arsenate in slake limed tailings solids except those high in Ni and As and low in Fe, in which cabrerite-annabergite (Ni, Mg, Fe(II) arsenate) may also precipitate near pH 5–6. In addition to the arsenate precipitates, smaller amounts of arsenate are also adsorbed onto tailings solids.The aging tests showed that after burial of the tailings, arsenic concentrations may increase with time from the breakdown of the arsenate phases (chiefly scorodite). However, the tests indicate that the rate of change decreases and approaches zero after 72 hrs at 25°C, and may equal zero at all times in the TMF at 4°C. Consistent with a kinetic model that describes the rate of breakdown of scorodite to form hydrous ferric oxide, the rate of release of dissolved arsenate to tailings porewaters from slake limed tailings: (1) is proportional to pH above pH 6–7; (2) decreases exponentially as the total molar Fe/As ratio of tailings raffinates is increased from 1/1 to greater than 5/1; and (3) is proportional to temperature with an average Arrhenius activation energy of 13.4 ± 4.2 kcal/mol.Study results suggest that if ferric sulfate and slaked lime are added in the tailings neutralization circuit to give a raffinate Fe/As molar ratio of at least 3–5 and a nominal (initial) pH of 8 (final pH of 7–8), arsenic and nickel concentrations of 2 mg/L or less, are probable in porewaters of individual tailings in the TMF for 50 to 10,000 yrs after tailings disposal. However, the tailings will be mixed in the TMF, which will contain about 35% tailings with Fe/As = 3.0, and 65% tailings with Fe/As = 5.0–7.7. Thus, it seems likely that average arsenic pore water concentrations in the TMF may not exceed 1 mg/L.  相似文献   

9.
Organic ligands are known to interfere with the polymerization of Fe(III), but the extent of interference has not been systematically studied as a function of structural ligand properties. This study examines how the number and position of phenol groups in hydroxybenzoic acids affect both ferrihydrite formation and its local (<5 Å) Fe coordination. To this end, acid Fe(III) nitrate solutions were neutralized up to pH 6.0 in the presence of 4-hydroxybenzoic acid (4HB), 2,4-dihydroxybenzoic acid (2,4DHB), and the hydroquinone 3,4-dihydroxybenzoic acid (3,4DHB). The initial molar ligand/Fe ratios ranged from 0 to 0.6. The precipitates were dialyzed, lyophilized, and subsequently studied by X-ray absorption spectroscopy and synchrotron X-ray diffraction. The solids contained up to 32 wt.% organic C (4HB ∼ 2,4DHB < 3,4DHB). Only precipitates formed in 3,4DHB solutions comprised considerable amounts of Fe(II) (Fe(II)/Fetot ≤ 6 mol%), implying the abiotic mineralization of the catechol-group bearing ligand during Fe(III) hydrolysis under oxic conditions. Hydroxybenzoic acids decreased ferrihydrite formation in the order 4HB ∼ 2,4DHB ? 3,4DHB, which documents that phenol group position rather than the number of phenol groups controls the ligand’s interaction with Fe(III). The coordination numbers of edge- and double corner-sharing Fe in the precipitates decreased by up to 100%. Linear combination fitting (LCF) of Fe K-edge X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectra revealed that this decrease was due to increasing amounts of organic Fe(III) complexes in the precipitates. Although EXAFS derived coordination numbers of Fe in ferrihydrite remained constant within error, all organic ligands decreased the coherently scattering domain (CSD) size of ferrihydrite as indicated by synchrotron X-ray diffraction analysis (4HB < 2,4DHB ? 3,4DHB). With decreasing particle size of ferrihydrite its Fe(O,OH)6 octahedra became progressively distorted as evidenced by an increasing loss of centrosymmetry of the Fe sites. Pre-edge peak analysis of the Fe K-edge XANES spectra in conjunction with LCF results implied that ferrihydrite contains on an average 13 ± 3% tetrahedral Fe(III), which is in very good agreement with the revised single-phase structural model of ferrihydrite (Michel, F. M., Barron, V., Torrent, J., Morales, M. P. et al. (2010) Ordered ferrimagnetic form of ferrihydrite reveals links among structure, composition, and magnetism. Proc. Natl. Acad. Sci. USA107, 2787-2792). The results suggest that hydroxybenzoic acid moieties of natural organic matter (NOM) effectively suppress ferrihydrite precipitation as they kinetically control the availability of inorganic Fe(III) species for nucleation and/or polymerization reactions. As a consequence, NOM can trigger the formation of small ferrihydrite nanoparticles with increased structural strain. These factors may eventually enhance the biogeochemical reactivity of ferrihydrite formed in NOM-rich environments. This study highlights the role of hydroquinone structures of NOM for Fe complexation, polymerization, and redox speciation.  相似文献   

10.
The distribution of As, Mo, Ni and Se in the aqueous and solid phases of U mine tailings in the Deilmann Tailings Management Facility (DTMF), located at the Key Lake mine in northern Saskatchewan, Canada, was defined using as-discharged tailings samples collected monthly starting in 1996 and core samples collected from the DTMF from 3 locations on 3 occasions between 2004 and 2009. These data indicated that the DTMF can be divided into two geochemical zones; tailings generated from the Deilmann ore body between 1996 and 2000 and tailings from the McArthur River ore body, mined after July 2000. The Deilmann tailings solids are generally characterized by greater elemental concentrations than those in the McArthur River tailings, particularly for As, Co and Ni. These elevated concentrations are attributed to the abundance of Ni–Co–As–S minerals in this ore. The mean aqueous concentrations of As, Mo, Ni, and Se are 3.7, 23.2, 0.14, and 0.02 mg L−1, respectively, in the Deilmann porewaters and 0.20, 4.16, 0.06, and 0.03 mg L−1, respectively, in the McArthur River porewaters. Similarly, the mean As, Mo, Ni, and Se solid phase concentrations are 5.89 × 103, 69.9, 3.20 × 103, and 17.4 μg g−1, respectively, for the Deilmann tailings and 440, 13.6, 551, and 3.03 μg g−1 in the McArthur River tailings. Statistically, pH remained unchanged from the time of discharge while Eh values have remained oxic with no significant change between the two tailings types over 15 a of residence time. Results from sequential extractions, thermodynamic modeling, and results of complimentary research indicated that ferrihydrite solubility is the dominant control on aqueous As concentrations and also plays a role in controlling dissolved Mo, Ni and Se.  相似文献   

11.
Mine tailings at the former Delnite gold mine in northern Ontario were characterized to assess the impact of a biosolids cover on the stability of As species and evaluate options for long-term management of the tailings. Arsenic concentrations in the tailings range from 0.15 to 0.36 wt% distributed among goethite, pyrite and arsenopyrite. Pyrite and arsenopyrite occur as small and liberated particles that are enveloped by goethite in the uncovered tailings and the deeper portions of the biosolids-covered tailings. Sulfide particles in the shallower portions of the biosolids-covered tailings are free of goethite rims. Arsenic occurs predominantly as As5+ with minor amount of As1− in the uncovered tailings. Coinciding with the disappearence of goethite rims on sulfide particles, the biosolids-covered tailings have As3+ species gradually increasing in proportion towards the cover. Leaching tests indicated that the As concentrations in the leachate gradually increase from less than 0.085 to 13 mg/L and Fe from 28 to 179 mg/L towards the biosolids cover. These are in sheer contrast to the leachate concentrations of less than 0.085 mg/L As and 24–64 mg/L Fe obtained from the uncovered tailings confirming the role of biosolids-influenced reduction and mobilization of As in the form of As3+ species. The evidence suggests that reductive dissolution of goethite influenced by the biosolids-cover caused the mobilization of As as As3+ species.  相似文献   

12.
 A detailed investigation of the mineralogy of As in the tailings of the Rabbit Lake uranium ore processing facility was conducted. The milling/ore extraction process was sampled at three different locations to obtain information about when, where and under what condition secondary As phases form. These samples were compared with four samples of varying As content from the Rabbit Lake in-pit tailings management facility (TMF). Up to 20% As in the tailings are present in primary minerals that reach the tailings directly because they are not dissolved during the uranium extraction. The remaining 80% constitute As that was dissolved during ore extraction and then re-precipitated before being discharged into the tailings pond. It was not possible to conclusively identify any individual re-precipitated (secondary) As minerals in the Rabbit Lake TMF. Indirect evidence from sequential extraction analyses suggests the presence of an amorphous Ca-As phase and a possible, but unlikely, minor amount of an amorphous Fe-As phase. However, the close association between hydrous ferric oxide (HFO) and As could be clearly demonstrated. HFO was identified to be 2-line ferrihydrite and its XRD pattern geometry indicates a substantial amount of adsorbed As. This is in good agreement with SEM, TEM and sequential extraction analyses that all showed the close association of HFO and As. Received: 14 February 2000 · Accepted: 9 May 2000  相似文献   

13.
Riparian soils are periodically flooded, leading to temporarily reducing conditions. Diffusion of O2 through plants into the rhizosphere maintains oxic conditions around roots, thereby promoting trace element fractionation along a redox gradient from the reduced soil matrix towards the oxic rhizosphere. The aim of this study was to determine the distribution and speciation of arsenic around plant roots in a contaminated (170-280 mg/kg As) riparian floodplain soil (gleyic Fluvisol). The analysis of soil thin sections by synchrotron micro-X-ray fluorescence (μ-XRF) spectrometry showed that As and Fe were enriched around roots and that As was closely correlated with Fe. Arsenic contents of three manually separated rhizosphere soil samples from the subsoil were 5-9 times higher than respective bulk As contents. This corresponds to the accumulation of about half of the total As in the subsoil in Fe-enrichments around roots. The speciation of As in the soil was assessed by oxalate extractions at pH 3.0 as well as by X-ray absorption near edge structure (XANES) and extended X-ray fine structure (EXAFS) spectroscopy. More than 77% of the total As was oxalate extractable in all samples. XANES and EXAFS spectra demonstrated that As was predominantly As(V). For the accurate analysis of the EXAFS data with respect to the bonding of As(V) to the Fe- or Al-octahedra of (hydr)oxides and clays, all 3-leg and 4-leg multiple scattering paths within the As(V)O4-tetrahedron were considered in a fully constrained fitting scheme. We found that As(V) was predominantly associated with Fe-(hydr)oxides, and that sorption to Al- and Mn-hydroxides was negligible. The accumulation of As in the rhizosphere may affect As uptake by plants. Regarding the mobility of As, our results suggest that by oxygenation of the rhizosphere, plants attenuate the leaching of As from riparian floodplain soils during periods of high groundwater levels or flooding.  相似文献   

14.
We calculated the forsterite Mg K-edge and the fayalite Fe K-edge X-ray absorption spectra both for the M 1 and M 2 sites and for the overall edge by using the one-electron multiple-scattering theory. The validity of the theoretical model is well illustrated by comparison of calculations with experimental data at the Mg K-edge of MgO (periclase) and at the Mg and Fe K-edges spectra of forsterite and fayalite. Starting from these results at room conditions, we calculated the Mg and Fe K-edges X-ray absorption spectra of forsterite and fayalite at low and high temperatures and at high pressures as well. Variations of fine structures occur mostly in the intermediate multiple scattering (IMS) regions and as a result of the applied pressure. In order to demonstrate the capability of XAS to lead to deeper knowledge of structure relevant to Earth's upper mantle we also attempted calcuating the high-P edge for Fe 2+ in low-spin using a different occupation of valence electrons. If a change in spin state really occurs in fayalite, our simple model shows that XAS would evidence it easily even with low resolution.  相似文献   

15.
Arsenic(V), as the arsenate (AsO4 3?) ion and its conjugate acids, has a strong affinity on Fe, Mn, and Al (oxyhydr)oxides and clay minerals. Removal of arsenate from aqueous solution by poorly crystalline ferrihydrite (hydrous ferric oxide) via a combination of macroscopic (equilibria and kinetics of sorption) and X-ray absorption spectroscopic studies was investigated. The removal of arsenate significantly decreased with increasing pH and sorption maxima of approximately 1.994 mmol/g (0.192 molAs/molFe) were achieved at pH 2.0. The Langmuir isotherm is most appropriate for arsenate sorption over the wide range of pH, indicating that arsenate sorption preferentially takes place at relatively homogenous and monolayer sites rather than heterogeneous and multilayer surfaces. The kinetic study demonstrated that arsenate sorption onto 2-line ferrihydrite is considerably fast, and sorption equilibrium was achieved within the reaction time of 2 h. X-ray absorption near-edge structure spectroscopy indicates no change in oxidation state of arsenate following interaction with the ferrihydrite surfaces. Extended X-ray absorption fine structure spectroscopy supports the efficient removal of arsenate by the 2-line ferrihydrite through the formation of highly stable inner-sphere surface complexes, such as bidentate binuclear corner-sharing (2C) and bidentate mononuclear edge-sharing (2E) complexes.  相似文献   

16.
The abandoned Sb deposit Pezinok in Slovakia is a significant source of As and Sb pollution that can be traced in the upper horizons of soils kilometers downstream. The source of the metalloids are two tailing impoundments which hold ∼380,000 m3 of mining waste. The tailings and the discharged water have circumneutral pH values (7.0 ± 0.6) because the acidity generated by the decomposition of the primary sulfides (pyrite, FeS2; arsenopyrite, FeAsS; berthierite, FeSb2S4) is rapidly neutralized by the abundant carbonates. The weathering rims on the primary sulfides are iron oxides which act as very efficient scavengers of As and Sb (with up to 19.2 wt% As and 23.7 wt% Sb). In-situ μ-XANES experiments indicate that As in the weathering rims is fully oxidized (As5+). The pore solutions in the impoundment body contain up to 81 ppm As and 2.5 ppm Sb. Once these solutions are discharged from the impoundments, they precipitate or deposit masses of As-rich hydrous ferric oxide (As-HFO) with up to 28.3 wt% As2O5 and 2.7 wt% Sb. All As-HFO samples are amorphous to X-rays. They contain Fe and As in their highest oxidation state and in octahedral and tetrahedral coordination, respectively, as suggested by XANES and EXAFS studies on Fe K and As K edges. The iron octahedra in the As-HFO share edges to form short single chains and the chains polymerize by sharing edges or corners with the adjacent units. The arsenate ions attach to the chains in a bidentate-binuclear and monodentate fashion. In addition, hydrogen-bonded complexes may exist to satisfy the bonding requirements of all oxygen atoms in the first coordination sphere of As5+. Structural changes in the As-HFO samples were traced by chemical analyses and Fe EXAFS spectroscopy during an ageing experiment. As the samples age, As becomes more easily leachable. EXAFS spectra show a discernible trend of increasing number of Fe-Fe pairs at a distance of 3.3-3.5 Å, that is, increasing polymerization of the iron octahedra to form larger units with fewer adsorption sites. Therefore, although ferrihydrite is an excellent material for capturing arsenic, its use as a medium for a long-term storage of As has to be considered with a great caution because it will tend to release arsenic as it ages.  相似文献   

17.
X-ray absorption and emission spectra were used to characterize the surface of chalcopyrite after oxidation both in air and in air-saturated aqueous solution (pH = 2-10). For chalcopyrite oxidized in aqueous solution, the Cu and Fe L-edge spectra show that the surface oxidation layer is copper deficient. As the pH increases, O K-edge spectra reveal a change in the nature of the oxidation layer. An iron (hydroxy)sulfate is dominant at low pH, whereas FeOOH is the major surface phase under alkaline conditions. Fe2O3 may be present at intermediate pH. The surfaces of chalcopyrite samples oxidized in air consist of a mixture of copper oxides, FeOOH, and sulfate phases. Sulfate is much more abundant on the surface of air-oxidized chalcopyrite because of its high solubility in aqueous solution. Likewise, copper oxidation products can be observed in the O K-edge spectra of air-oxidized chalcopyrite in contrast to the aqueous samples.  相似文献   

18.
Many studies have proposed that silicic acid and phosphate (PV) can displace arsenic sorbed to iron oxides leading to elevated As concentrations in aquatic systems. While surface complexation models are adept at quantifying sorption to synthetic oxides in laboratory systems their application to complex natural systems remains challenging. In this study we provide a systematic approach to developing a robust use of models for understanding AsV distribution in natural systems in which hydrated iron oxides are the main adsorptive phase. The Waikato River provides a useful laboratory for this work because it contains high H4SiO4, AsV and PV loadings due to geothermal and agricultural inputs. A 15 min oxalate extraction and a 48 h ethylenediaminetetraacetic acid (EDTA) extraction of river sediment contained the same ratios of As:Fe, P:Fe and Si:Fe. Both of these extracts target the poorly ordered iron oxide phases (typically ferrihydrite) and by following the release of elements over time in the EDTA extraction it was possible to demonstrate that the extracted As, P, and Si were associated with the ferrihydrite. This demonstrates for the first time that a single oxalate extraction can quantify ferrihydrite sorbed H4SiO4, As and PV and provides a basis to quantify the role of these ligands in inhibiting AsV sorption to sediments. The measured concentrations of ferrihydrite sorbed AsV, PV and H4SiO4 for the Waikato River suspended sediment allow for the informed selection of appropriate model parameters for applying the Diffuse Layer Model to the system. In this way it was possible to quantify the effect of the individual components in the river water on AsV sorption. This study provides an explanation for the observation that the proportion of sorbed As in the Waikato River is generally significantly lower than that observed in rivers closer to the world average concentrations. More generally the study provides a method to quantify the role of individual water chemistry components on AsV distribution in natural systems.  相似文献   

19.
Mining and metallurgical processing of gold and base metal ores can lead to the release of arsenic into the aqueous environment as a result of the weathering and leaching of As-bearing minerals during processing and following disposal. Arsenic in process solutions and mine drainage can be effectively stabilized through the precipitation of ferrihydrite. However, under anaerobic conditions imposed by burial and waste cover systems, ferrihydrite is susceptible to microbial reduction. This research, stimulated by the paucity of information and limited understanding of the microbial reduction of arsenical ferrihydrite, was conducted on synthetic adsorbed and co-precipitated arsenical 6-line ferrihydrite (Fe/As molar ratio of 10/1) using Shewanella sp. ANA-3 and Shewanella putrefaciens CN32 in a chemically defined medium containing 0.045 mM phosphate concentration. Both bacteria were equally effective in their reducing abilities around pH 7, resulting in initial rates of formation of dissolved As(III) of 0.10 μM/h for the adsorbed, and 0.08 μM/h for the co-precipitated arsenical 6-line ferrihydrite samples. The solid phases in the post-reduction samples were characterized by powder X-ray diffraction (XRD), micro-XRD, scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron microprobe and X-ray absorption spectroscopy (XAS) techniques. The results indicate the formation of secondary phases such as a biogenic Fe(II)–As(III) compound, akaganeite, goethite, hematite and possibly magnetite during bacterial reduction experiments. Holes and bacterial imprints measuring about 1–2 μm were observed on the surfaces of the secondary phases formed after 1200 h of reduction. This study demonstrates the influence of Fe and As reducing bacteria on the release of significant concentrations of more mobile and toxic As(III) species from arsenical 6-line ferrihydrite, more readily from the adsorbed than from the co-precipitated ferrihydrite.  相似文献   

20.
Microbial sulfidogenesis plays a potentially important role in Fe and As biogeochemistry within wetland soils, sediments and aquifers. This study investigates the specific effects of microbial sulfidogenesis on Fe mineralogy and associated As mobility in mildly acidic (pH 6) and mildly basic (pH 8) advective-flow environments. A series of experiments were conducted using advective-flow columns, with an initial solid-phase comprising As(III)-bearing ferrihydrite-coated quartz sand. Columns for each pH treatment were inoculated with the sulfate-reducing bacteria Desulfovibrio vulgaris, and were compared to additional abiotic control columns. Over a period of 28 days, microbial sulfidogenesis (as coupled to the incomplete oxidation of lactate) caused major changes in Fe mineralogy, including replacement of ferrihydrite by mackinawite and magnetite at the in-flow end of the inoculated columns. At pH 8, the Fe2+ produced by electron transfer between sulfide and ferrihydrite was mainly retained near its zone of formation. In contrast, at pH 6, much of the produced Fe2+ was transported with advecting groundwater, facilitating the downstream Fe2+-catalyzed transformation of ferrihydrite to goethite. At both pH 6 and pH 8, the sulfide-driven reductive dissolution of ferrihydrite and its replacement by mackinawite at the in-flow end of the inoculated columns resulted in substantial mobilization of As into the pore-water. At pH 8, this caused the downstream As concentrations within the inoculated columns to be greater than the corresponding abiotic column. However, the opposite occurred under pH 6 conditions, with the Fe2+-catalyzed transformation of ferrihydrite to goethite in the inoculated columns causing a decrease in downstream As concentrations compared to the abiotic column. Although thermodynamically favorable at intermediate times and depth intervals within the inoculated columns, solid As sulfide phases were undetectable by As XANES spectroscopy. Our findings show that microbial sulfidogenesis can trigger significant As mobilization in subsurface environments with advective groundwater flow. The results also demonstrate that formation of mackinawite by sulfidization of ferric (hydr)oxides is not effective for the immobilization of As, whereas the Fe2+-catalyzed transformation of ferrihydrite to goethite under mildly acidic conditions may mitigate As mobility.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号