共查询到20条相似文献，搜索用时 453 毫秒
1.
Diffraction grating based simultaneous projection of a large number of distinct and circular laser dots was adopted to solve correspondence and accuracy problems during automatic three dimensional measurement of a textureless and featureless object at close range. After rigid placement of the projector over the telescope of a geodimeter, accurate calibration and derivation of a camera model of the virtual active camera (the projector) was done without a control field and using a bundle adjustment procedure. While automatic detection and labelling of the actively placed target points over any given object remained a problem, algorithms were developed to locate and label these target points placed over a nearly flat and textureless surface. A conventional thresholding method was combined with least squares matching (LSM) to provide automatic subpixel image co-ordinate measurement of the target points placed over a textureless object but, considering the real object conditions, semi-automatic image co-ordinate measurement was done by LSM. The system provided an intersection parallax of 0.3 mm during a laboratory test scan of a planar object at 4.5 m distance. 相似文献
2.
基于结构光和单CCD相机的物体表面三维测量 总被引：1，自引：0，他引：1
非接触式物体表面三维自动测量是计算机视觉领域的中心任务之一 ,围绕这个问题 ,提出了一种利用结构光 ,单 CCD相机和双定向技术实现物体表面三维自动测量的新方法。采用该方法 ,无需测定相机和结构光光截面之间的相对位置 ,在单目序列影像上就可测量出物体表面的三维坐标。 相似文献
3.
Practical Influences of Geometric and Radiometric Image Quality Provided By Different Digital Camera Systems 总被引：1，自引：0，他引：1
Imaging systems founded on current digital camera technology are finding widespread use in high precision measurement applications. A single digital CCD camera, or an array of such cameras, equipped with ring lighting equipment is commonly used to acquire imagery of high contrast retroreflective targets placed on the object at discrete locations to signalize points of interest. The precise and accurate measurement of each imaged target location is a fundamental requirement if suitable measurement tolerances are to be obtained. Whilst such systems are undoubtedly capable of producing excellent results, the practical effects of target image quality on the photogrammetric measurement process is in need of careful consideration. This paper revisits some fundamentals of the optical imaging of retrotargets and investigates some abilities of a range of digital camera systems to provide images of retrotargets that are appropriate to the measurement process. Some experimental results are presented including the imaging of planar arrays of differing sized retrotargets at differing angles and exposures and a series of network analyses in which the level of target image intensity has been varied systematically. 相似文献
4.
Diego González-Aguilera Pablo Rodríguez-Gonzálvez Javier Gómez-Lahoz 《ISPRS Journal of Photogrammetry and Remote Sensing》2009,64(3):308-316
Driven by progress in sensor technology, algorithms and data processing capabilities, close range photogrammetry has found a wide range of new application fields over the past two decades. Particularly, the emergence of terrestrial laser scanner has contributed to the close range photogrammetry “popularization” through many promising new applications. Nevertheless, a central issue in many of these developments is the integration of sensor technology with reliable data processing schemes to generate highly automated photogrammetric measurements systems.This paper presents a flexible approach for the automatic co-registration of terrestrial laser scanners (TLS) and amateur digital cameras (DC) to be used effectively in practice. Particularly, the developed approach deals with two different images: a camera image acquired with a DC and a range image obtained with a TLS. To this end, an open-source tool “USAlign” has been developed for testing the different experiments. 相似文献
5.
A combined single range and single image device for low-cost measurement of building façade features
Celestino Ordóñez Pedro Arias José Herráez Jaime Rodríguez María T. Martín 《The Photogrammetric Record》2008,23(122):228-240
The dimensions of building façades and window apertures are usually determined by making direct measurements using tapes and plummets. This approach, however, has a number of drawbacks including the physical risk to which the persons making the measurements are exposed. This paper proposes an indirect approach based on close range photogrammetry that is inexpensive, simple, fast and safe, and which does not require specialist staff or direct ground control measurements. The method is based on taking a picture using a digital camera and measuring the distance to the object using a handheld laser distance meter. Both items of equipment are mounted on a specially designed support that allows the laser distance meter to move independently of the camera. 相似文献
6.
A generic network design in close range photogrammetry is one where optimal multi-ray intersection geometry is obtained with as few camera stations as practicable. Hyper redundancy is a concept whereby, once the generic network is in place, many additional images are recorded, with the beneficial impact upon object point precision being equivalent to the presence of multiple exposures at each camera position within the generic network. The effective number of images per station within a hyper redundant network might well be in the range of 10 to 20 or more. As is apparent when it is considered that a hyper redundant network may comprise hundreds of images, the concept is only applicable in practice to fully automatic vision metrology systems, where it proves to be a very effective means of enhancing measurement accuracy at the cost of minimal additional work in the image recording phase. This paper briefly reviews the network design and accuracy aspects of hyper redundancy and illustrates the technique by way of the photogrammetric measurement of surface deformation of a radio telescope of 26 m diameter. This project required an object point measurement accuracy of σ = 0·065 mm, or 1/400 000 of the diameter of the reflector. 相似文献
7.
数字近景摄影测量在工业检测中的应用 总被引：2，自引：0，他引：2
论述了利用数字相机与实时数字近景摄影测量技术相结合建立的工业零件检测系统的方法.该方法通过直接线性变换提供的概略初值,由理论严密的自检校光束法平差完成高精度的平差计算的数字近景摄影测量的处理的基本过程,并经后续处理,完成工业目标的自动检测.本系统利用目标点位的概略定位与最小二乘影像匹配相结合,达到目标点位的子像素级的精确配准和数字影像的自动量测技术.这种通过非接触方式建立的工业检测系统在精度、可靠性、灵活性、自动化程度、实时性等方面具有更大的优越性,能较好地满足高精度工业检测的要求. 相似文献
8.
Still video cameras are easy to handle, portable, digital image acquisition devices for close range photogrammetry. They allow fast object recording without being connected to a computer. As an example of the new camera type, the high resolution Kodak DCS200 is presented in this paper, combined with the DPA digital photogrammetric station used for image measurement and object reconstruction. The performance of this three dimensional measurement system is illustrated by calibration results as well as applications to high precision dimensional inspection in industry. 相似文献
9.
GE Renyan Doctoral Candidate School of Information Engineering WTUSM Wuhan China 《地球空间信息科学学报》1998,(1)
With the help of CCD images,the realization of high precision po-sitioning and measurement has become the basic standard for machine vision andreal time photogrammetry systems.However,deformation and other sorts ofdegradation occurring during transmission are major limiting factors of the preci-sion attainable with most current CCD cameras and frame grabbers.So a preciseradiometric and geometric transmission of images from CCD sensor to memory is afundamental aspect of CCD camera calibration.The geometric calibration system,which uses some image processing algorithms of the CCD camera based on the re-searched and developed system is discussed.The reliability and validity are alsodiscussed.The experimental results for the calibration of the CCD array will betaken as an important quality index for CCD evaluation. 相似文献
10.
The Development of Camera Calibration Methods and Models 总被引：18，自引：0，他引：18
Correction for image distortion in cameras has been an important topic for as long as users have wanted to faithfully reproduce or use observed information. Initially the main application was mapping. While this task continues today, other applications also require precise calibration of cameras, such as close range three dimensional measurement and many two dimensional measurement tasks. In the past, the cameras used were few in number and highly expensive whereas today a typical large industrial company will have many inexpensive cameras being used for highly important measurement tasks. Cameras are used more today than they ever were but the golden age of camera calibration for aerial mapping is now well in the past. This paper considers some of the key developments and attempts to put them into perspective. In particular the driving forces behind each improvement have been highlighted. 相似文献
11.
非量测数码相机由于价格低廉、使用方便等原因成为近景摄影测量获取影像的主要设备之一。但非量测相机的内方位元素和畸变系数未知,不能直接利用共线方程进行解析计算,因而必须对相机进行检校。而相机参数检校成果质量的高低直接关系着能否满足测量精度的要求。本文提出了基于二维直接线性变换(DLT)的相机标定算法,利用平面控制点解算出像点坐标和相应物点物方空间坐标之间的线性关系,再结合内方位元素及畸变参数的解算进行迭代,以得到满足一定精度要求的相机参数(x0,y0,f,k1,k2,p1,p2),并用MATLAB加以实现。 相似文献
12.
GE Renyan 《地球空间信息科学学报》2013,16(1):29-32
ABSTRACT With the help of CCD images, the realization of high precision positioning and measurement has become the basic standard for machine vision and real time photogrammetry systems. However, deformation and other sorts of degradation occurring during transmission are major limiting factors of the precision attainable with most current CCD cameras and frame grabbers. So a precise radiometric and geometric transmission of images from CCD sensor to memory is a fundamental aspect of CCD camera calibration. The geometric calibration system, which uses some image processing algorithms of the CCD camera based on the researched and developed system is discussed. The reliability and validity are also discussed. The experimental results for the calibration of the CCD array will be taken as an important quality index for CCD evaluation. 相似文献
13.
提出了基于大比例尺航空影像共面约束的相机自检校方法,该方法使用所有立体像对同名点基于共面约束对相机的内方位元素及畸变系数进行解算。首先进行航空影像同名点匹配,构建立体像对;然后基于共面约束使用直接解法和迭代优化进行相对定向,解算相机位置与姿态;最后使用最小二乘优化方法解算相机内方位元素和畸变系数。对于高分辨率大尺寸航空影像,图像中心及边缘的畸变差异较大,为了进一步提高解算精度,对图像进行网格区域划分解算畸变。使用大比例尺航空影像进行解算能真实精确反映航空摄影测量时所获取图像的相机参数和畸变系数,避免检校环境与使用环境不同解算得到的相机畸变参数不能真实反映所获取影像的畸变问题;使用所有同名点解算,避免由于选择不同特征点或控制点对检校精度的影响;通过区域网格划分,进一步提高了解算精度。对检校结果进行了分析,该方法精度较高,与基于室外检校场的精度相当,能真实精确反映航空摄影测量时所获取图像的相机参数和畸变系数,提高了三维重建的精度。 相似文献
14.
The lack of an accepted method of accurate and objective measurement of wound dimensions is a major obstacle to the assessment of effective wound management regimes. This paper addresses the problems associated with wound measurements and introduces a new instrument based on the principle of coded structured light. The instrument projects a sequence of parallel stripes of light onto the surface of the lesion. These patterns are observed by a video camera which is linked to a computer system where the images can be stored and processed. Using the positions of the focal points of the camera and the stripe projector, the computer calculates a three dimensional map of the observed scene by triangulation. This map is then used to reconstruct the original, healthy skin surface by cubic spline interpolation. The area of the reconstructed surface is the area of the wound. Its volume is sandwiched between the measured and the reconstructed surface. The system also calculates the depth and the circumference of the wound. The instrument measures the volume of the wound with a precision of about 5 per cent provided that the ratio of volume to area is greater than 4 mm. 相似文献
15.
普通数码相机固定在高精度旋转平台上可集成为旋转全景相机,水平旋转多位置拍摄,可获取全景影像。给出了旋转全景相机的成像几何关系模型,实现了旋转全景相机的标定,利用稀疏分布的少量控制点（最少3个）,即可解算出平台旋转中心坐标与起始方位角,及每张像片的外方位元素,再利用多站旋转拍摄的影像进行前方交会就可获得物方点坐标。实验结果表明,本文提出的方法在实际摄影测量中可少受视野和控制点数量的限制,通过较少的控制点即可解算出物方点坐标,且测量精度较好。该方法是在困难场景进行近景摄影测量的一种新的有效手段。 相似文献
16.
多台激光跟踪仪组网联合动态测量具有测量范围大、测量精度高、采样频率高的优点,在工业大尺寸动态位姿测量领域具有广泛的应用前景。目前激光跟踪仪动态测量精度评定主要针对单台激光跟踪仪,无法满足多台激光跟踪仪动态位姿测量精度评定的要求。文中提出基于物方先验约束条件的动态位姿测量精度评定方法,通过空间圆轨迹发生器和铟钢四面体,提供刚性约束条件和动态测量基准,实现对不同运动速度、不同采样频率的位姿测量精度进行评定。测试数据分析表明,基于物方先验约束条件的动态位姿测量精度评定方法能够有效的实现对测量精度的评定。 相似文献
17.
Terrestrial Linear Array CCD-based panoramic cameras have been used for purely imaging purposes, but they also have a high potential for use in high accuracy measurement applications. The imaging geometry and the high information content of those images make them suitable candidates for quantitative image analysis. For that a particular sensor model has to be established and the inherent accuracy potential has to be investigated. We developed a sensor model for terrestrial Linear Array-based panoramic cameras by means of a modified bundle adjustment with additional parameters, which models substantial deviations of a real camera from the ideal one. We used 3D straight-line information in addition to tie points to conduct a full calibration and orientation without control point information. Due to the similarity of the operation of laser scanners to panoramic cameras the sensor model of the panoramic cameras was extended for the self-calibration of laser scanners. We present the joint sensor model for panoramic cameras and laser scanners and the results of self-calibration, which indicate a subpixel accuracy level for such highly dynamic systems. Finally we demonstrate the systems’ accuracy of two typical panoramic cameras in 3D point positioning, using both a minimal number of control points and a free network adjustment. With these new panoramic imaging devices we have additional powerful sensors for image recording and efficient 3D object modeling. 相似文献
18.
A comparison of dense matching algorithms for scaled surface reconstruction using stereo camera rigs
Photogrammetric methods for dense 3D surface reconstruction are increasingly available to both professional and amateur users who have requirements that span a wide variety of applications. One of the key concerns in choosing an appropriate method is to understand the achievable accuracy and how choices made within the workflow can alter that outcome. In this paper we consider accuracy in two components: the ability to generate a correctly scaled 3D model; and the ability to automatically deliver a high quality data set that provides good agreement to a reference surface. The determination of scale information is particularly important, since a network of images usually only provides angle measurements and thus leads to unscaled geometry. A solution is the introduction of known distances in object space, such as base lines between camera stations or distances between control points. In order to avoid using known object distances, the method presented in this paper exploits a calibrated stereo camera utilizing the calibrated base line information from the camera pair as an observational based geometric constraint. The method provides distance information throughout the object volume by orbiting the object.In order to test the performance of this approach, four topical surface matching methods have been investigated to determine their ability to produce accurate, dense point clouds. The methods include two versions of Semi-Global Matching as well as MicMac and Patch-based Multi-View Stereo (PMVS). These methods are implemented on a set of stereo images captured from four carefully selected objects by using (1) an off-the-shelf low cost 3D camera and (2) a pair of Nikon D700 DSLR cameras rigidly mounted in close proximity to each other. Inter-comparisons demonstrate the subtle differences between each of these permutations. The point clouds are also compared to a dataset obtained with a Nikon MMD laser scanner. Finally, the established process of achieving accurate point clouds from images and known object space distances are compared with the presented strategies.Results from the matching demonstrate that if a good imaging network is provided, using a stereo camera and bundle adjustment with geometric constraints can effectively resolve the scale. Among the strategies for dense 3D reconstruction, using the presented method for solving the scale problem and PMVS on the images captured with two DSLR cameras resulted in a dense point cloud as accurate as the Nikon laser scanner dataset. 相似文献
19.
20.
葛仁彦 《武汉大学学报(信息科学版)》1993,(2)
利用CCD 摄像机实现目标点的高精度定位和量测是计算机机器视觉和实时摄影测量系统的基本手段。而CCD 摄像机获取的目标影像在传输的过程中受到几何精度的限制。所以,目标影像从CCD 传感器到存储器的高精度的辐射和几何传输是CCD 摄像机检校的基本问题。作者在一新研制的解析测图仪上,设计了一套CCD 摄像机自动检校的软件系统。本文对该软件系统进行了介绍,并通过检校试验,证明了其可靠性和实用性。 相似文献