共查询到20条相似文献，搜索用时 46 毫秒
1.
This paper presents a comparison between two theoretical methods for computing the second-order diffraction loads on arrays of bottom-mounted, surface-piercing vertical circular cylinders in regular waves. One method presents a complete solution for the second-order hydrodynamic loads on the cylinder array via a numerical integration over the mean fluid free-surface. The other method is based on a large spacing approximation between the array members and involves the solution of a set of equivalent isolated body problems to obtain estimates for the second-order hydrodynamic loads. Numerical results for a pair of cylinders indicate very good agreement between the two methods at center-to-center spacing of both three and five radii, indicating that the approximate method may be sufficient to compute hydrodynamic interference effects to the second-order in many practical engineering situations. 相似文献
2.
Nonlinear contributions due to elevation of the free surface, the dynamic head, and the second-order velocity potential on the wave loads are presented in closed-form expressions. Such nonlinearities resulting from large-amplitude ocean waves are associated with the irrotational flow interacting with a fixed bottom-mounted vertical cylinder piercing the surface. These are expressed in the form of dynamic, waterline and quadratic forces all of which depend on the square of the wave amplitude. The appropriate modifications are made to both the classical Morison equation and the well-known linear diffraction theory of MacCamy and Fuchs for accounting the second-order effects.A limited comparative study is performed to verify the present theoretical derivations. In general, satisfactory agreements have been obtained with the test results from various laboratory studies by different researchers. However, under certain environmental conditions, some discrepancies still exist with the measured results. 相似文献
3.
Wojciech Sulisz
Mickey Johansson
《Applied Ocean Research》1992,14(6):333-340Approximate first- and second-order analytical solutions of wave diffraction of a semi-submerged horizontal cylinder of rectangular cross-section are presented. The solutions are based on the assumption that the pressure in the fluid domain underneath the cylinder is linearly dependent on the horizontal space coordinate. Basically, this approach is valid when the clearance between the bottom of the cylinder and the sea bottom is small in comparison with the wave length and is recommended for a cylinder of substantial draught where due to the small clearance other methods are difficult to apply. Boundary conditions are satisfied by a choice of a proper form of the potential functions and by making use of the properties of matching conditions. Theoretical results reveal that the magnitude of the vertical second-order time-dependent loads could be significant and even exceed the corresponding first-order quantities. This phenomenon, which occurs even at moderate steepnesses, as well as the assumption of a linear pressure distribution, are confirmed by experiments performed in a wave tank. 相似文献
4.
An iterative frequency domain method of analysis is presented for determining the response behaviour of Guyed Offshore Towers to low-frequency, second-order wave drift forces generated in a random sea environment. For the response analysis, the tower is idealized as a shear beam with a rotational spring at the bottom support. The guylines are replaced by a non-linear spring. The second-order drift force is considered to be proportional to the square of the wave elevation and is simulated using a drift force coefficient and the time history of a slowly varying wave envelope in random sea. The responses due to drift forces are obtained in frequency domain by incorporating the non-linearities produced due to non-linear guy lines. An example problem is solved under different random sea states to compare the response behaviour of the tower obtained by the second-order wave force, the first-order wave force and a combination of the two. 相似文献
5.
Numerical calculation of forces induced by short-crested waves on a vertical cylinder of arbitrary cross-section 总被引：1，自引：0，他引：1
Most off-shore oil platforms are supported by vertical cylinders extending to the ocean floor. An important problem in off-shore engineering is the calculation of the wave loading exerted on these vertical cylinders. Analytical solutions have been found for the case of plane incident waves incident on a circular cylinder by MacCamy and Fuchs [(1954), Wave forces on piles: a diffraction theory. U.S. Army Corps of Engineering, Beach Erosion Board, Technical Memorandum No. 69] and also for short-crested waves incident on a circular cylinder by Zhu [(1993), Diffraction of short-crested waves around a circular cylinder. Ocean Engng 20, 389–407]. However, for a cylinder of arbitrary cross-section, no analytic solutions currently exist. Au and Brebbia [(1983), Diffraction of water waves for vertical cylinders using boundary elements. Appl. Math. Modelling 7, 106–114] proposed an efficient numerical approach to calculate the wave loads induced by plane waves on vertical cylinders by using the boundary element method. However, wind-generated waves are better modelled by short-crested waves. Whether or not these short-crested waves can induce larger wave forces on a structure is of great concern to ocean engineers. In this paper wave loads, induced by short-crested incident waves, on a vertical cylinder of arbitrary cross-section are discussed. For a cylinder of certain cross-section, the wave loads induced by short-crested waves can be larger than those induced by plane waves with the same total wave number. 相似文献
6.
A numerical wave tank is established based on two-phase FVM model and VOF method and verified with the physical experiment in Grue et al. (1994). Focusing waves with different wave steepness passing a vertical cylinder are investigated by Numerical simulations. The phenomenon called ‘secondary load cycle’ which may lead to ringing response, is observed and discussed. The presence of secondary load cycle could be related to Froude Number (Fr). The possible transition region of the present and absent secondary load cycle is Fr = 0.4. Sub and super harmonic wave components appear in the propagation of waves, second-order wave theory could give a good prediction. Morison equation with linear wave theory could predict well the wave forces of vertical cylinder with small steepness without the secondary load cycle, but cannot capture the crests/troughs of the wave forces with the secondary load cycle. Crest improvements are achieved by second-order wave theory. A spectral analysis based on wavelet transform is applied to wave loads. The frequency of the secondary load may be up to 13 times the wave frequency, which may cause the ringing response expanding to a higher frequency range. Strong ringing response occurs in steep wave, it could be extended up to 15 times wave trough-to-trough frequency due to the secondary load cycle. The damping has slightly influence on the peak of resonance response, but it will lead to faster decay of subsequent response, if the damping ratio is large. 相似文献
7.
It is well established that the modulational instability enhances the probability of occurrence for extreme events in long crested wave fields. Recent studies, however, have shown that the coexistence of directional wave components can reduce the effects related to the modulational instability. Here, numerical simulations of the Euler equations are used to investigate whether the modulational instability may produce significant deviations from second-order statistical properties of surface gravity waves when short crestness (i.e., directionality) is accounted for. The case of a broad-banded directional wave field (i.e. wind sea) is investigated. The analysis is concentrated on the wave crest and trough distribution. For completeness a comparison with a unidirectional wave field is presented also. Results will show that the distributions based on second-order theory provide a good estimate for the simulated crest and trough height also at low probability levels. 相似文献
8.
Non-linear loads on a fixed body due to waves and a current are investigated. Potential theory is used to describe the flow, and a three-dimensional (3D) boundary element method (BEM), combined with a time-stepping procedure, is used to solve the problem. The exact free-surface boundary conditions are expanded about the still-water level by Taylor series so that the solution is evaluated on a time-invariant geometry. A formulation correct to second order in the wave steepness and to first order in the current speed is used. Numerical results are obtained for the first-order and the second-order oscillatory forces and for the second-order mean force on a fixed vertical circular cylinder in waves and a current. The second-order oscillatory forces on the body in waves and current are new results, while the remaining force components are verified by comparison with established numerical and analytical models. It is shown that the current can have a significant influence on the forces, and especially on the amplitude of the second-order oscillatory component. 相似文献
9.
A numerical model for coastal water wave motion that includes an effective method for treatment of non-reflecting boundaries is presented. The second-order one-way wave equation to approximate the non-reflecting boundary condition is found to be excellent and it ensures a very low level of reflection for waves approaching the boundary at a fairly wide range of the incidence angle. If the Newman approximation is adopted, the resulting boundary condition has a unique property to allow the free propagation of wave components along the boundary. The study is also based on a newly derived mild-slope wave equation system that can be easily made compatible to the one-way wave equation. The equation system is theoretically more accurate than the previous equations in terms of the mild-slope assumption. The finite difference method defined on a staggered grid is employed to solve the basic equations and to implement the non-reflecting boundary condition. For verification, the numerical model is then applied to three coastal water wave problems including the classical problem of plane wave diffraction by a vertical circular cylinder, the problem of combined wave diffraction and refraction over a submerged hump in the open sea, and the wave deformation around a detached breakwater. In all cases, the numerical results are demonstrated to agree very well with the relevant analytical solutions or with experimental data. It is thus concluded that the numerical model proposed in this study is effective and advantageous. 相似文献
10.
11.
The performance of coastal vertical seawalls in extreme weather events is studied numerically, aiming to provide guidance in designing and reassessing coastal structures with vertical wall. The extreme wave run-up and the pressure on the vertical seawall are investigated extensively. A time-domain higher-order boundary element method (HOBEM) is coupled with a mixed Eulerian-Lagrangian technique as a time marching technique. Focused wave groups are generated by a piston wave-maker in the numerical wave tank using a wave focusing technique for accurately reproducing extreme sea states. An acceleration-potential scheme is used to calculate the transient wave loads. Comparisons with experimental data show that the extended numerical model is able to accurately predict extreme wave run-ups and pressures on a vertical seawall. The effects of the wave spectrum bandwidth, the wall position and the wave nonlinearity on the wave run-up and the maximum wave load on the vertical seawall are investigated by doing parametric studies. 相似文献
12.
Second-order springing on an elastic body with forward speed is analyzed by numerical simulations. The boundary-value problem for the velocity potential is solved by means of the direct time-domain higher-order boundary element method (HOBEM). The free-surface boundary condition in the boundary-value problem is approximated on the mean surface up to second order by use of perturbation and Taylor-series expansion methods. The body boundary condition for an elastic body is derived with various quantities which are redefined in the generalized mode. These variables such as mode shape, normal vector, etc. are obtained by using directional derivative and continuum mechanics, and the same mathematical expressions are used to obtain several second-order generalized forces. To validate the numerical results, the second-order hydrodynamic force on the bottom-mounted rigid/elastic cylinders without forward speed is compared with other semi-analytic results. The property of second-order forces on an elastic ship is studied by changing the flexural rigidity and forward speed with elastic response. It is confirmed that the second-order velocity potential is important for a body with forward speed and investigation should be made more on numerical methods for accurate computation of the second-order velocity-potential force with forward speed. 相似文献
13.
Yu Ke Su Weidong Postgraduate River Harbour Department Nanjing Hydraulic ResearchInstitute Nanjing Engineer River Harbour Department Nanjing Hydraulic Research Institute Nanjing 《中国海洋工程》1992,(1)
Generally, the reliability of ami -sliding and anti-overturning stability of an isolated gravity cylinder in a certain working period can be evaluated only when the statistical properties of short term stability are given first. The authors used numerical method to simulate the stability state function of a cylinder in short-crested sea, and further to get the probabilitical characteristics of the structure's stability by time domain analysis. The external loads appeared in the state functions include horizontal wave force, lift force and the respective moments, and the loads are correlated by co- spectrum. The numerical method presented in this paper can be used not only to solve short term reliability problem directly, but to calculate and analyse the long term reliability problem as well. For circular cylinders, an example of simulation and analysis is displayed in this paper. 相似文献
14.
A novel Boundary Element Method (BEM) named the second-order Taylor Expansion Boundary Element Method (the 2nd order TEBEM) is developed for the solution of the second-order wave radiation velocity potential and sum-frequency wave loads for floating bodies. The radiation condition is enforced by a hybrid method of the multi-transmitting formula and damping zone. For the interior domain problem of a cube and a sphere, numerical results demonstrate that the 2nd order TEBEM can accurately solve the first and second-order gradients of velocity potential on the no-smoothed and smoothed boundary compared to the low-order BEM. The double frequency forces acting on the truncated cylinder are calculated under finite water depth. The agreement between the 2nd order TEBEM and others' numerical results is good. Moreover, all of the singular integrals in the 2nd order TEBEM can be solved analytically, so its implementation is much easier compared to the high-order BEM. 相似文献
15.
Diffraction of a directionally spread wave group by a cylinder 总被引：2，自引：0，他引：2
The problem of diffraction of a directionally spread focused wave group by a bottom-seated circular cylinder is considered from the viewpoint of second-order perturbation theory. After applying the time Fourier transform and separation of vertical variable the resulting two-dimensional non-homogeneous Helmholtz equations are solved numerically using finite differences. The detailed formulation of the second-order radiation condition is presented. Numerical solutions of the problem are obtained for JONSWAP amplitude spectra for the incoming wave group with various types of directional spreading. The results are compared with the corresponding results for a unidirectional wave group of the same amplitude spectrum. Finally we discuss the applicability of the averaged spreading angle concept for practical applications. 相似文献
16.
The third order triple-frequency wave load on fixed axisymmetric bodies by monochromatic waves is considered within the frame of potential theory. Waves are assumed to be weak non-linearity and a perturbation method is used to expand velocity potentials and wave loadings into series according to a wave steepness of kA. Integral equation method is used to compute velocity potentials up to second order in wave steepness. The third order triple-frequency wave loads are computed by an indirect method and an efficient method is applied to form the third order forcing term on the free surface quickly. The method can be used to compute third order triple-frequency surge force, heave force and pitch moment on any revolution bodies with vertical axes. The comparison with Malenica and Molin's results is made on surge force on a uniform cylinder, and comparison with experimental results is made on third order surge force, heave force and pitch moment on a truncated cylinder. More numerical computations are carried out for third order forces and moments on a uniform cylinder, truncated cylinders and a hemisphere. 相似文献
17.
This paper addresses a numerical investigation of nonlinear waves interactions with an array of two surface-piercing vertical cylinders and the corresponding nonlinear hydrodynamic loads on each individual cylinder. The primary interest of this study is concentrated on the problem of three-dimensional scattering of solitary waves by cylinder arrays and the nonlinear interactions between scattered waves. The theoretical model adopted for simulation is the generalized Boussinesq two-equation model. The boundary-fitted coordinate transformation and multiple-grid technique are utilized here to simplify the computation domain and to facilitate the applications of the boundary conditions on the cylinder surfaces. The velocity potential, free-surface elevation and subsequent evolution of the scattered wave field are numerically evaluated. The hydrodynamic forces on each cylinder during wave impact are also determined. A study of the sheltering effect by the neighboring structures on wave loads is conducted. It is found that the presence of the neighboring cylinder has shown significant influence on the wave loads and the scattering of the primary incident waves. For two transversely arranged cylinders, the transverse force coefficient increases as the separation distance decreases. 相似文献
18.
Jianjun Zhang Eric W. Gill 《Oceanic Engineering, IEEE Journal of》2006,31(4):779-796
An algorithm is developed for the inversion of bistatic high-frequency (HF) radar sea echo to give the nondirectional wave spectrum. The bistatic HF radar second-order cross section of patch scattering, consisting of a combination of four Fredholm-type integral equations, contains a nonlinear product of ocean wave directional spectrum factors. The energy inside the first-order cross section is used to normalize this integrand. The unknown ocean wave spectrum is represented by a truncated Fourier series. The integral equation is then converted to a matrix equation and a singular value decomposition (SVD) method is invoked to pseudoinvert the kernel matrix. The new algorithm is verified with simulated radar Doppler spectrum for varying water depths, wind velocities, and radar operating frequencies. To make the simulation more realistic, zero-mean Gaussian noise from external sources is also taken into account 相似文献
19.
The interaction of water waves with arrays of bottom-mounted, surface-piercing circular cylinders is investigated theoretically. The sidewall of each cylinder is porous and thin. Under the assumptions of potential flow and linear wave theory, a semi-analytical solution is obtained by an eigenfunction expansion approach first proposed for impermeable cylinders by Spring and Monkmeyer (1974), and later simplified by Linton and Evans (1990). Analytical expressions are developed for the wave motion in the exterior and all interior fluid regions. Numerical results are presented which illustrate the effects of various wave and structural parameters on the hydrodynamic loads and the diffracted wave field. It is found that the porosity of the structures may result in a significant reduction in both the hydrodynamic loads experienced by the cylinders and the associated wave runup. 相似文献
20.
W. Koterayama 《Ocean Engineering》1980,7(3):399-412
This paper presents a method of estimating wave forces acting on a submerged horizontal circular cylinder fixed in oblique waves.The experiments show that drag and inertia coefficients in beam sea are available for calculating the wave forces in oblique waves.Wave forces exerted on a vertical circular cylinder in deep waves are also investigated.The experimental results show that wave forces acting on the vertical cylinder coincide approximately with hydrodynamic forces acting on a submerged circular cylinder in an oscillating fluid. 相似文献