共查询到17条相似文献，搜索用时 296 毫秒
1.
为建立能够反映深部岩石变形全过程模拟方法,首先,针对强度准则的适用性条件建立了深部岩石强度准则,并在此基础上提出了深部岩石微元强度度量方式,同时,引入统计损伤理论,考虑损伤阀值对岩石损伤度量的影响,从而建立了统计损伤本构模型;其次,根据岩石三轴试验曲线特征给出了模型参数的确定方法,并在峰值应力和峰值应变分别与围压之间的关系基础上,建立了能够反映不同围压下岩石变形的统计损伤本构模型;最后,将试验曲线与本文模型的预测结果进行比较分析。研究结果表明:本文模型不仅能够反映深部岩石的变形过程,还能较好地反映岩石强度随围压变化的特性,表明了本文模型与方法具有一定的合理性和可行性。 相似文献
2.
岩石损伤软化统计本构模型及参数确定方法的新探讨 总被引：5，自引：2，他引：3
基于现有岩石损伤软化统计本构模型研究,通过探讨岩石损伤软化统计本构模型参数与岩石应力-应变全程曲线特征参数即峰值应力与应变的关系,建立起特定围压下模型参数与围压的解析表达式。引进岩石Mohr-Coulomb强度准则,建立不同围压下岩石应力-应变全程曲线峰值应力与围压之间的关系,再通过探讨不同岩石应力-应变全程曲线峰值应变与围压的关系,导出了具有普遍意义的不同围压下岩石峰值应变计算公式,从而建立岩石损伤软化统计本构模型参数确定的新方法,由此得到能够模拟不同围压下岩石应变软化全过程的统一损伤软化统计本构模型。该模型较同类模型具有参数少和易于确定等特点,理论计算和实测结果比较分析表明了该方法与模型的合理性。 相似文献
3.
考虑体积变化影响的岩石应变软硬化损伤本构模型及参数确定方法 总被引：2，自引：0，他引：2
针对现有岩石损伤模型的局限性与不足,将应力作用下的岩石抽象为空隙、损伤与未损伤材料三部分,以空隙率反映岩石体积或空隙的变化,以损伤变量或损伤因子反映岩石力学性态的改变程度,通过对各部分材料的微观受力及其与宏观应力和应变的关系进行分析,建立了可反映岩石变形过程中体积或空隙变化特性的新型岩石损伤模型;从岩石微元强度合理度量方法研究入手,引进统计损伤理论,建立了可考虑损伤阀值影响的岩石统计损伤演化模型,进而建立了能模拟应变软硬化全过程的岩石统计损伤本构模型,并提出了参数确定方法。该模型不仅能反映岩石应变软硬化特性,而且能反映岩石变形的初期压密和后期扩容的特性。通过实例分析与讨论,表明模型合理与可行。 相似文献
4.
基于正态分布的岩石损伤统计本构模型及其参数确定方法研究 总被引：1，自引：0，他引：1
根据岩石微元强度服从正态分布的特点,引进能合理描述岩石微元强度的参量,基于岩石三轴应力应变试验曲线建立了反映岩石破裂全过程的统计损伤本构模型。在此基础上,重点探讨了正态分布参数对岩石损伤本构模型的影响,据此对岩石统计损伤模型进行了合理修正,从而建立了反映岩石破裂全过程的三维统计损伤本构模型,与试验结果及现有研究结果进行比较显示了该模型的合理性,具有广泛的应用前景。 相似文献
5.
饱和土变形过程模拟的统计损伤方法研究 总被引：1，自引：0，他引：1
针对传统损伤理论的不足与局限性,从研究岩土材料损伤的合理定义入手,并通过深入探讨饱和土损伤的微观力学机制,建立了适合于饱和土的新型损伤模型。在此基础上,引进统计损伤理论,建立了模拟特定围压下饱和土变形全过程的统计损伤本构模型及其参数确定方法。通过探讨饱和土损伤统计本构模型参数与围压的关系,建立了该模型的合理修正方法,从而建立了反映不同围压条件的统一饱和土损伤统计本构模型。理论与试验结果分析表明了该模型的合理性,该模型不仅能反映饱和土的变形全过程,而且能反映孔隙水压力对饱和土变形的影响。 相似文献
6.
岩石几何损伤模型是建立统计损伤本构模型的重要基础。在岩石变形力学特性基础上对现有岩石几何损伤模型进行了回顾性分析,针对它们难以较好地反映初始损伤特征和峰后变形破坏特征的缺陷与不足,首先,将岩石材料视为由未损伤部分、初始损伤部分和后继损伤部分组成,提出了考虑初始损伤的岩石几何损伤模型;然后,通过探讨Weibull分布参数m和F0对损伤变量变化产生的影响,构建了参数型岩石几何损伤模型,在此基础上建立了应变软化类岩石统计损伤本构模型并进行了修正,给出了模型参数的确定方法;最后,通过模型验证和参数分析表明,修正后模型能够较好地模拟岩石变形破裂全过程,参数l和h对损伤变量变化产生的影响与m和F0等效,解决了现有岩石几何损伤模型存在的共性问题,该模型和方法具有一定的合理性和可行性。 相似文献
7.
为了揭示岩石变形的破坏机理以及岩石材料产生损伤的本质原因,文章对岩石材料变形规律和力学特性进行分析后,再以损伤变量作为影响岩石变形和力学性能变化的内变量,采用能量原理、有效应力原理和统计损伤理论构建了一种基于弹性能释放率的新型岩石统计损伤本构模型。该损伤模型进一步完善了岩石损伤本构模型的理论体系,弥补了传统损伤模型无法合理解释引发岩石破坏原因的不足。利用岩石试验数据对损伤模型的参数进行确定,并将损伤演化模型代入弹性能-应变模型中,分析在加载过程中岩石弹性能变化的规律。结果表明:模型曲线与试验曲线在峰前变形阶段几乎重合,说明损伤模型可以很好地反映岩石的变形特性;在初始加载阶段,岩石的损伤变量随着轴向应变的增大而增大,说明在荷载作用下,岩石内部裂隙逐渐发展发育,使得岩石材料的损伤逐步积累;在围压达到10 MPa以上时,损伤-应变曲线基本重合。同时,在初始加载时刻,损伤-应变曲线增长率急剧上升,大约在岩石应变为0.01%时,损伤-应变曲线趋于平稳变化状态;且由于岩石在峰值应力点附近损伤迅速累积,进而使得损伤变量在数值上快速增大到1,这说明了围压的增大使得岩石破坏极限得到显著的提升。 相似文献
8.
基于新型损伤定义的岩石损伤统计本构模型探讨 总被引：10，自引：2，他引：8
针对几何损伤理论中损伤定义的局限性与不足,对岩石损伤定义进行了改进;在此基础上,将在应力作用下的岩石材料抽象为破坏与未破坏两部分,并根据这两部分不同的受力情况,建立出新型损伤模型;其次,利用统计损伤理论,建立出岩石统计损伤演化方程,进而建立起基于特定围压下的岩石损伤统计本构模型;然后,通过探讨模型参数与围压的经验关系,对模型进行合理修正,从而建立了反映不同围压条件下的岩石损伤统计本构模型,并通过探讨模型参数的物理意义,初步建立了反映岩石软化与硬化特性相互转化的临界物理力学参数的确定方法。该模型能够反映岩石软化与硬化特性相互转化的特征,与试验结果进行比较分析表明,该模型与实测结果吻合良好。 相似文献
9.
建立可以模拟岩石应力-应变全过程的本构模型一直是岩土工程中研究的热点之一.首先,在深入探讨应变软化类岩石受力变形全过程每个阶段特征的基础上,并针对Lemaitre应变等价性理论的不足之处,基于更合理的假定建立了能够反映应变软化类岩石体积变化以及峰后出现残余强度的新型损伤模型;然后,通过引入统计损伤理论并考虑损伤阈值对岩石变形过程的影响,建立了能够模拟应变软化类岩石受力变形全过程的统计损伤本构模型,该模型还可以反映岩石的体积变化以及初始孔隙率对其变形过程的影响;最后,通过理论计算与试验结果及他人模型的对比分析,表明了该模型的合理性与可行性. 相似文献
10.
基于残余强度修正的岩石损伤软化统计本构模型研究 总被引：3，自引：0，他引：3
岩石随着围压的增大,残余强度的增加幅度比峰值强度大,残余强度逐渐成为影响岩石全应力-应变曲线峰后段的主要因素,因此,建立岩石损伤软化统计本构模型时,对残余强度进行修正是非常必要的。基于岩石应变强度理论以及岩石微元强度服从Weibull随机分布的假设,考虑岩石峰后残余强度对损伤变量进行修正,在微元破坏符合Hoek-Brown屈服准则条件下,建立了能够反映岩石峰后软化特征的三维损伤统计本构模型;依据岩石试验全应力-应变曲线的几何特征,推导出本构模型参数的数学表达式,并基于花岗岩室内试验数据对模型参数进行探讨,研究了Weibull分布参数与本构模型的关系,探讨了损伤修正系数的取值和岩石累积损伤的扩展过程;将建立的本构模型理论曲线与4种岩石（斑状二长花岗岩、细晶大理岩、砂岩和粉砂质泥岩）不同围压下的常规三轴压缩试验曲线进行对比分析,结果表明,该模型能很好地描述岩石破裂过程的全应力-应变关系和表征岩石残余强度特征。这对于岩石损伤软化问题以及岩石加固处理措施的研究均具有重要的意义。 相似文献
11.
Zhechao Wang Shucai Li Liping Qiao Jiangang Zhao 《Rock Mechanics and Rock Engineering》2013,46(6):1603-1615
A series of laboratory tests were performed to examine the fatigue behavior of granite subjected to cyclic loading under triaxial compression condition. In these tests, the influences of volumetric change and residual strain on the deformation modulus of granite under triaxial cyclic compression were investigated. It is shown that the fatigue behavior of granite varies with the tendency for volumetric change in triaxial cyclic compression tests. In the stress–strain space, there are three domains for fatigue behavior of rock subjected to cyclic loading, namely the volumetric compaction, volumetric dilation with strain-hardening behavior, and volumetric dilation with strain-softening behavior domains. In the different domains, the microscopic mechanisms for rock deformation are different. It was also found that the stress level corresponding to the transition from volumetric compaction to volumetric dilation could be considered as the threshold for fatigue failure. The potential of fatigue deformation was compared with that of plastic deformation. The comparison shows that rocks exhibit higher resistances to volumetric deformation under cyclic loading than under plastic loading. The influence of residual strain on the fatigue behavior of rock was also investigated. It was found that the axial residual strain could be a better option to describe the fatigue behavior of rock than the loading cycle number. A constitutive model for the fatigue behavior of rock subjected to cyclic loading is proposed according to the test results and discussion. In the model, the axial residual strain is considered as an internal state variable. The influences of confining pressure and peak deviatoric stress on the deformation modulus are considered in a term named the equivalent stress. Comparison of test results with model predictions shows that the proposed model is capable of describing the prepeak fatigue behavior of rock subjected to cyclic loading. 相似文献
12.
对攀枝花钒钛磁铁矿尖山矿区的细粒和中粒辉长岩进行了单轴压缩、常规三轴压缩、抗拉强度和软化等系列岩石力学试验,研究了岩石结构(矿物颗粒大小)、水和围压等因素对岩石强度和变形特性的影响。结果表明,细粒辉长岩单轴抗压强度、弹性模量和压拉比均高于中粒辉长岩,但在三轴压缩情况下,两种岩石的峰值强度、残余强度和弹性模量差异较小;与中粒辉长岩相比,细粒辉长岩的峰值强度的黏聚力C较大,而峰值强度的内摩擦角φ较小;随着围压的增长,辉长岩峰值强度、残余强度与围压近似呈线性关系,剪切破坏角减小,平均模量E增长不明显,割线模量E50增长较显著;辉长岩的软化系数较高,在水的作用下弹性模量降低,泊松比升高。 相似文献
13.
海底隧道风化花岗岩流变试验研究 总被引：3，自引：1，他引：2
采用全自动三轴流变试验机对厦门东通道海底隧道风化槽地段岩石进行三轴压缩流变试验,研究了岩石在不同围压和不同应力水平作用下轴向应变随时间的变化规律。试验表明,强风化花岗岩时效特性较全风化花岗岩更加明显;围压对岩石蠕变变形存在很大影响,围压越大,蠕变变形量越小。通过分析岩石压缩流变过程中应力-应变关系可知,蠕变变形在弹性阶段不对岩石整体构成明显损伤。而进入塑性阶段后,黏塑性变形对岩石破坏影响较大。建议通过支护增加围压,以提高隧道围岩屈服强度和减小流变变形,防止隧道失稳破坏。 相似文献
14.
基于试验的花岗岩渐进破坏本构模型研究 总被引：7，自引：2，他引：5
对取自大渡河流域大岗山电站的花岗岩进行了系统的试验研究,得到了不同围压下的应力-应变曲线。根据岩样受力过程中内部微裂纹的活动状态,定义了4个特征应力,即闭合应力、起裂应力、破损应力、峰值应力,来反映花岗岩的渐进破坏过程,特征应力也反映了岩石内部的损伤程度。依据特征应力,将试验曲线分为4个阶段,并对每一阶段分别求取变形模量和泊松比。结果表明,变形模量不仅与围压有关,且与岩石的损伤程度有关,而泊松比只取决于岩石的损伤程度。特征应力可由体积应变曲线结合线性回归技术准确求取。在此基础上,提出了一个考虑花岗岩渐进破坏的本构模型。在该模型中,变形参数(弹性模量、泊松比)是应力状态的函数,强度参数（凝聚力、内摩擦角）是塑性变形的函数。将该模型嵌入大型有限元分析软件ABAQUS,对不同围压下的花岗岩室内压缩试验进行模拟,结果表明,模拟所得的应力-应变曲线与试验曲线的吻合程度较高,模型能反映花岗岩等脆性岩石的峰前非线性力学行为。 相似文献
15.
Rock mechanical behaviors and deformation characteristics are associated with stress history and loading path. Unloading conditions occur during the formation of a salt cavity as a result of washing techniques. Such conditions require an improved understanding of the mechanical and deformation behaviors of rock salt. In our study, rock salt dilatancy behaviors under triaxial unloading confining pressure tests were analyzed and compared with those from conventional uniaxial and triaxial compression tests. The volume deformation of rock salt under unloading was more than under triaxial loading, but less than under uniaxial loading (with the same deviatoric stress). Generally, under the same axial compression, the corresponding dilatancy rate decreased as the confining compression increased, and under the same confining compression, the corresponding dilatancy rate increased as the axial compression increased. The dilatancy boundary of the unloading confining pressure test began with unloading. This is different from the dilatancy of the uniaxial and triaxial compression tests. The accelerated dilatancy point boundary stress value was affected by confining and axial compressions. The specimens entered into a creep state after unloading. The associated creep rate depends on the deviatoric stress and confining compression values at the end of the unloading process. Based on unloading theory and the experimental data, we propose a constitutive model of rock salt damage. Our model reflects the dilatancy progression at constant axial stress and reduced lateral confinement. 相似文献
16.
The stress-strain behaviour of rock material related to fracture under compression 总被引：12，自引：0，他引：12
Fracture is the main reason for the non-linear behaviour of hard rocks. The fracture mechanics of rock is studied in this article by analysis of the fracture process under compression. A constitutive model that describes the relationship between the macro deformation of rock and the micro fracture within rock is developed. The propagation of microcracks, the non-linearity of deformation, the loading-and-unloading hysteresis and the variation of the apparent Young's modulus and Poisson's ratio are studied using the developed model. The model simulations demonstrate that: (1) the fracture toughness, initial crack length, crack density, and Young's modulus are four crucially important parameters that affect the deformation behaviour of rock; (2) the elastic parameters (E and v) of the rock matrix should be measured in triaxial tests. If they are measured in uniaxial tests, the upper straight unloading portion of the stress-strain curve is suggested to be used for the purpose, unless the closure effect of open cracks will be included in the estimations. In addition (3), the slope of the reloading stress-strain curve is a measure of the damage in material. 相似文献
17.
Effect of Temperature on the Strength Parameters at the Plastic Domain for Unconsolidated Sandstones
C. B. Morales-Monsalve I. F. Lara-Restrepo E. F. Araujo-Guerrero G. A. Alzate-Espinosa A. Arbelaez-Londoño A. Naranjo-Agudelo 《Geotechnical and Geological Engineering》2018,36(6):3537-3549
Heavy and extra heavy oil reservoirs are subjected to high temperatures during thermal recovery processes like SAGD and CSS. In-situ temperature state changes throughout these operations may generate variations in the mechanical properties or strength parameters of the rock such as Young and Bulk’s modulus, internal friction angle, cohesion and dilation angle. This paper presents results about the variation of the elastic modulus and mechanical properties, in both elastic and plastic region due to changes in temperature and effective confining stress for reconstituted samples of Colombian unconsolidated sands. In order to study these changes, several drained triaxial tests are performed in a range of temperature between 50 and 230 °C and a range of effective confining stress between 0.4 and 8.2 MPa, these tests are carried out on reconstituted samples of oil sands recovered in an outcrop in the Magdalena middle valley of Colombia. The experimental results are analyzed with an analytical model based on the constitutive model of Mohr–Coulomb. The analysis is divided in two ways: First, the elastic region is analyzed calculating the variation of the elastic modulus (Young and bulk’s modulus) and the mechanical parameters (cohesion and internal friction angle) with temperature and effective confining stress, these calculus are done in the linear zone of the stress–strain curve. Then, the plastic region is analyzed using Mohr–Coulomb constitutive model with a non-associative flow rule in order to represent in a better way the dilatant/contractive behavior of the material, from this analysis is possible to obtain the behavior of the mechanical properties during plastic strains. The stress–strain curves obtained from the triaxial compression tests show that for the highest and medium effective confining stress (8.2 and 4.0 MPa), there is a hardening strain behavior after the yielding point that implies a loose sand behavior under confining conditions. Meanwhile, for lowest effective confining stress (0.4 MPa) the samples show a softening strain, a typical behavior for dense sands under confining conditions. 相似文献