首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 34 毫秒
1.
标准物质参考值的准确性在测试仪器校准、分析数据质量监控以及方法评价等方面具有非常重要的作用.为了检验国家地质标准物质参考值的准确性,本文应用高温高压密闭溶样-电感耦合等离子体质谱法分析了国家地质标准物质的18种岩石(GBW 07103 ～ GBW 07125)、19种沉积物(GBW 07301 ～ GBW 07318)和19种土壤(GBW 07401 ～ GBW 07430)中36种痕量与稀土元素.结果表明,除个别标准样品中的几个元素(Ni、Cr、Pb、Co、Cu、Sc、Yb、Lu)外,其余国家标准物质中36种元素测定结果的相对标准偏差均小于10％;绝大部分元素测定值的相对误差小于10％,测定值与参考值能较好地吻合.将误差较大元素的测定值与其他实验室的测定值以及文献报道值进行了比较,指出已有的参考值需要修正;针对部分沉积物和土壤中的元素未提供参考值,如GBW 07306的Ni、GBW 07313的Be、Hf、Ta,GBW 07314的Li、Be,GBW 07409、GBW 07410和GBW0741 1的Hf、Ta,GBW 07426的Gd、Ta,本文给出了相应的参考值.  相似文献   

2.
采用HNO3-HClO4-HF常压消解、HNO3-H2O2-HF高压密闭消解、HNO3-H2O2微波消解,干法灰化后残渣用HNO3-HF-HClO4溶解等四种方法对植物样品进行前处理,使用电感耦合等离子体质谱(ICP-MS)对植物样品中的27种元素进行定量分析,探讨了不同前处理方法对ICP-MS测定植物样品中微量元素的影响。分析结果表明: HNO3-HClO4-HF常压消解使用大量试剂,污染环境,造成空白值高;在常压体系中HClO4的加入能提高样品的消解效率,但赶酸不完全,会造成复合离子对钒和砷的干扰;干法灰化过程中某些元素(硼、汞等)会损失;常压消解和高压密闭消解中加入HF能有效地提高铍、稀土、钇、钛、锑、铀等元素的回收率,但在蒸干赶HF的过程中,会造成硼和汞的损失,并且钢套的生锈会造成铬、镍空白值高。尽管没有一种方法能适用于所有元素的分析,但相比较而言,HNO3-H2O2微波消解体系操作简单,大部分元素(除铍、钛、锑、铋、稀土)能得到满意的结果,精密度(RSD)均小于10%(n=10),相对误差(RE)为-4.6%~13.6%。  相似文献   

3.
The United States Geological Survey granitic and granodioritic reference materials G‐2 and GSP‐2 were decomposed in high‐pressure bombs using both HF‐HNO3 and HF‐HNO3‐HClO4 in order to evaluate the feasibility of characterising the entire suite of geologically relevant trace elements through direct analysis with a high‐resolution inductively coupled plasma‐mass spectrometer (HR‐ICP‐MS). The digested samples were diluted to the appropriate levels and analysed at low, medium and high resolution depending on the required sensitivity and potential interferences for each element. Memory effects during analysis of the high field strength elements (HFSE) were negligible when analysed using an all‐Teflon, uncooled sample introduction system and combined with adequate wash times with 4% v/v aqua regia + 0.5% v/v HF between samples. The concentration of the remaining lithophile elements was determined with a conventional, cooled, Scott‐type spray chamber using a wash solution of 1% v/v HNO3. Total procedural blanks contributed between 0.01 to 0.5% to final sample concentrations and blank subtractions were typically unnecessary. Abundances for Li, Hf, Ba, Zr, Ga, Rb, Sr, La, Ce, Th and U were systematically higher, while those for the heavy rare earth elements (HREEs), Cu and Y were systematically lower in this study compared to USGS values for G‐2 and GSP‐2. This is likely to be related to, respectively, higher recoveries from more efficient digestion of refractory phases (i.e., zircon, tourmaline), and better resolution of interferences when using a HR‐ICP‐MS. Sample digestion experiments also showed that perchloric acid digestion in high pressure bombs resulted in superior recoveries and better precision for the bulk of the trace elements analysed. The concentration of the remaining elements overlapped within uncertainty with recommended reference values and with values determined in other studies using isotope‐dilution TIMS, ICP‐MS and XRF. Concentrations for the elements Cd, Sn, Sb, Ta, Bi, Tb, Ni and Mo are also reported for G‐2 and GSP‐2 reference materials. Our study shows therefore that it is feasible to determine thirty‐nine geologically relevant trace elements accurately and directly in granitoid sample digests when using a HR‐ICP‐MS, thereby negating the need for ion exchange or isotopic spiking.  相似文献   

4.
In this contribution, we report Hf isotopic data and Lu and Hf mass fractions for thirteen Chinese rock reference materials (GBW07 103–105, 109–113 and 121–125, that is GSR 1–3, 7–11 and 14–18, respectively) that span a broad compositional range. Powdered samples were spiked with a 176Lu‐180Hf enriched tracer and completely digested using conventional HF, HNO3 and HClO4 acid dissolution protocols. Fluoride salts were dissolved during a final H3BO3 digestion, and chemical purification was performed using a single Ln resin. All measurements were carried out on a MC‐ICP‐MS. This work provides the first comprehensive report of the Lu‐Hf isotopic composition of Chinese geochemical rock reference materials, and results indicate that they are of comparable quality to the well‐characterised and widely used USGS and GSJ rock reference materials.  相似文献   

5.
采用HNO3-H2O2体系对植物样品进行风冷回流消解,电感耦合等离子体质谱法(ICP-MS)同时测定植物样品中46个元素的含量。将称有样品的磨口锥形瓶加装风冷管后直接放在普通平板铝块电热板上,一次可对45个锥形瓶回流装置同时进行加热,不需要严格地规定消解时间,保证回流加热微沸消解至消解完全即可。植物标准物质(GBW 10012、GBW 10014和GBW 10019)的分析结果与标准值相一致,方法精密度(RSD,n=6)为0.44%～5.59%。与干法灰化消解和微波消解等样品处理方法相比较,操作简单快捷,试剂用量少,空白值较低,溶液盐度较小,有利于植物样品中多元素ICP-MS同时测定。采用调试液调节ICP-MS仪器测定的最佳化,确定了ICP-MS测定的最佳条件,同时探讨了元素之间的干扰关系,采用数学校正法有效地消除了测定的干扰。  相似文献   

6.
应用电感耦合等离子体质谱法(ICP-MS)分析碳酸盐岩样品中的痕量元素,其中高钙基体的存在会对元素的分析信号产生明显的抑制或增强作用,从而引起显著的基体干扰。本文研究了硝酸-盐酸-高氯酸-氢氟酸四酸敞开溶样体系下ICP-MS同时测定碳酸盐岩中30种痕量元素的方法。重点分析了质谱干扰包括样品基体本身所带来的谱线干扰、同量异位素干扰和多原子离子干扰,并对钙含量高的碳酸盐岩样品中Ca对Ni的干扰进行了试验,分别采用数学公式或干扰系数等方法对干扰因素进行校正,使分析结果得到了明显改善。标准物质的测定值与标准值基本一致,方法精密度(RSD)除个别元素为10%~15%,大多数元素均小于10%,符合地质样品分析规范要求。  相似文献   

7.
Complete dissolution is essential to obtain accurate analytical results for geological samples. Felsic rocks are known to be very difficult to dissolve because of the presence of refractory minerals such as zircon. In this study, we undertook a systematic evaluation of the effect of the HF/HNO3 ratio, digestion time, digestion temperature, digested test portion mass and the presence of insoluble fluorides on analytical results for the felsic rock GSP‐2 using high‐pressure HF and HF/HNO3 digestion. Digestion in mixtures of HF and HNO3 acids is a commonly used method of dissolution for geological samples. However, our results clearly indicate that adding HNO3 inhibited the digestion capabilities of HF for refractory minerals such as zircon. It took 8–12 hr for Zr to be completely recovered in GSP‐2 at 190 °C, whereas it needed about 36 and 72 hr at 160 and 140 °C, respectively. White precipitates were observed in the final solution for test portion mass > 100 mg, irrespective of which of the five different digestion solutions was used (1 ml HF, 2 ml HF, 1 ml HF + 0.5 ml HNO3, 1 ml HF + 1 ml HNO3 and 1.5 ml HF + 1.5 ml HNO3). Environmental scanning electron microscopy showed that these precipitates were mainly composed of AlF3. Instead of further HCl, HNO3 or HClO4 attack, we propose that using ultra‐fine samples and a small sample size is a good way to avoid the formation of insoluble residues (e.g., fluorides). To further investigate the precision and accuracy of the proposed method (using HF alone as the digestion solution during the first acid attack step), a suite of silicate rock reference materials was analysed. Most of the results were found to be in reasonable agreement with the reference values, with a relative error of < 10%.  相似文献   

8.
利用电感耦合等离子体质谱法(ICP-MS)测定植物样品中微量元素的关键技术是消除植物样品的有机基体效应,本文通过预处理方法中的酸消解体系、称样量和消解方式消除其影响。以国家标准物质灌木枝叶组合样(GBW07603)为材料进行研究,对比分析了硝酸-过氧化氢、硝酸-氢氟酸、硝酸-氢氟酸-过氧化氢3种酸溶体系的消解效果,以确定最佳酸溶体系,进而定量研究2种称样量(50 mg和100 mg)和3种消解方式(密封高压二次消解、密封高压一次消解、微波消解)的消解效果,并以In作为内标采用ICP-MS测定微量元素含量。结果表明:硝酸-氢氟酸-过氧化氢酸溶体系的消解效果最好;50 mg的测定值更接近于参考值;微波消解法的测定值明显偏低,而密封高压二次消解法是灌木枝叶样品预处理的有效方法。  相似文献   

9.
Eleven synthetic silicate and phosphate glasses were prepared to serve as reference materials for in situ microanalysis of clinopyroxenes, apatite and titanite, and other phosphate and titanite phases. Analytical results using different micro-analytical techniques showed that the glass fragments were homogeneous in major and trace elements down to the micrometre scale. Trace element determinations using inductively coupled plasma-mass spectrometry (ICP-MS), multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS), laser-ablation inductively coupled plasma-mass spectrometry (LA-ICP-MS) and secondary ionisation mass spectrometry (SIMS) showed good agreement for most elements (Li, Be, B, Cs, Rb, Ba, Sr, Ga, Pb, U, Th, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Er, Tm, Yb, Lu, Zr, Hf, Ta, Nb) studied and provide provisional recommended values.  相似文献   

10.
Development of new techniques, enabling simultaneous determination of large numbers of elements in environmental samples, can force analysts to use certified reference materials that do not contain all the elements of interest. In this paper, the mass fractions of forty‐six major and trace elements, including rare earth elements (REE), are presented in one soil (NCS DC 77302 also known as GBW 07410) and five sediment (Metranal‐1, IAEA 405, MESS‐3, NCS DC 73309 also known as GBW 07311 and NCS DC 75301 also known as GBW 07314) certified reference materials determined by high resolution inductively coupled plasma‐mass spectrometry. The selected certified materials represent a spectrum of geological matrices often analysed in environmental studies. Measured elements include certified elements, elements listed with information values as well as new elements absent from certificates, including REEs and some other elements. REE + Y mass fractions in the river sediment reference material Metranal‐1 are reported for the first time. The results obtained are in agreement with available certified or information values.  相似文献   

11.
建立电感耦合等离子体质谱法(ICP-MS)测定水系沉积物中铌、钽、锆、铪四种元素的分析方法。将样品与氢氧化钠、过氧化钠混合物放入高温炉中,熔融分解完全,用热水提取,过滤后弃去滤液,将滤纸及沉淀用酒石酸-盐酸溶液溶解,稀释至刻度测定。方法检出限(3s)为:LD(Nb)=0.08μg/g,LD(Ta)=0.04μg/g,LD(Zr)=0.5μg/g,LD(Hf)=0.04μg/g,精密度(RSD%,n=6)为:0.84%~4.21%。该测定方法具有灵敏度高、精密度好、分析速度快、线性范围宽、操作性强等优势。采用该方法对国家一级标准物质进行测定表明,其结果与标准值吻合。此方法已在实际地质调查样品分析中得到应用。  相似文献   

12.
Desilicification elevates extraction of Re and platinum‐group elements (PGEs) from many geological reference materials (RMs), but the extent to which it affects less chalcophile elements has been investigated rarely. To further evaluate the effect of desilicification, mass fractions of elements with variable chalcophile affinities (In, Cd, Cu, Ag, S, Se, Te, Re and PGEs) in different RMs were obtained by isotope dilution and digestion procedures involving HF‐HNO3 in bombs versus HNO3‐HCl in Carius tubes. The results show that the extraction efficiencies of HF‐desilicification vary in different RMs and for different elements. HF‐desilicification led to a significant increase (30–70%) for In and Cd mass fractions in all analysed RMs, but it played a negligible role in other strongly chalcophile elements in many samples (e.g., UB‐N and WGB‐1). Noticeably, desilicification led to a 10–30% increase in the mass fractions of Cu, Ag, S, Se and Te in BHVO‐2 and BIR‐1a, but less so in BCR‐2. These results could be attributed mainly to the variable chalcophile affinities of elements and their relative budget in sulfides, alloys and silicates. Desilicification should thus be preferred to determine chalcophile elements for most samples, except in cases where they are negligibly hosted in silicates.  相似文献   

13.
Trace amounts (from nanogram to microgram levels) of bromine and iodine were determined by inductively coupled plasma-mass spectrometry (ICP-MS) in twenty-three geochemical reference materials issued by the GSJ, USGS, IAEA etc. The pyrohydrolysis technique was used to separate bromine and iodine from samples analysed in the form of powder. The accuracy and precision of the experimental values were assessed by the comparative analysis of well established reference materials such as USGS AGV-1, BCR-1 and IGGE GBW07312. The measured values agreed well with reported values within a 10% error range. We also report reliable new data for these elements in these geochemical reference materials.  相似文献   

14.
凹凸棒黏土是具有层链状结构的含水富镁铝硅酸盐矿物,矿床成因不同导致凹凸棒黏土中微量元素的组成存在差异,其中Be、Cr、Ni、As、Cd、Sb、Hg、Pb会对健康和环境产生不利影响,而V、Mn、Co、Cu、Zn、Mo、Sn、Ba作为凹凸棒黏土的重要微量元素影响其性能和应用范围,因此,对凹凸棒黏土中微量元素进行精准分析可为...  相似文献   

15.
随着我国对生态文明建设的重视,自然资源综合调查势在必行,对生物标准物质亦提出了新的需求。当前相关调研工作已经大面积开展,自然资源综合调查、农产品与食品安全评价都需要对生物样品元素组成进行准确测试,需要以生物标准物质作为生物成分测试量值比对和溯源的基础,因此对生物基体标准物质的需求量大幅增加。大米作为主要粮食之一,其食品安全日益受到重视,对大米中的化学成分进行准确的分析测试具有重要的现实意义,因而对大米标准物质的需求量尤为突出,但目前大米成分分析标准物质已供不应求。本文严格按照《标准物质定值的通用原则及统计学原理》（JJF 1343—2012）和《地质分析标准物质的研制》（JJF 1646—2017）等相关规范要求,开展了GBW10010a大米成分分析标准物质的复（研）制工作,包括样品采集、加工制备、均匀性检验、稳定性检验、多家实验室协作定值测试及不确定度评定等关键环节。结果表明：本次复（研）制的大米标准物质定值成分多样、量值准确可靠,符合国家一级标准物质的要求。GBW10010a共定值54项主微量元素,包括Ag、Al、As、B、Ba、Be、Bi、Ca、Cd、Ce、Co、Cr、Cs、Cu、Dy、Er、Eu、Fe、Gd、Ge、Hg、Ho、K、La、Li、Ho、Mg、Mn、Mo、N、Na、Nb、Nd、Ni、P、Pb、Pr、Rb、S、Sb、Sc、Se、Si、Sm、Sr、Tb、Th、Tl、Tm、U、V、Y、Yb、Zn,其中的39项元素给出了标准值及不确定度,包括Ag、Al、As、B、Ba、Ca、Cd、Ce、Co、Cs、Cu、Dy、Er、Fe、Hg、K、Li、Mg、Mn、Mo、N、Na、Nd、Ni、P、Pb、Pr、Rb、S、Sb、Se、Si、Sm、Sr、Tb、Tl、Y、Yb、Zn;15项元素提供参考值,包括Be、Bi、Cr、Eu、Gd、Ge、Ho、Ho、La、Nb、Sc、Th、Tm、U、V。与原有GBW10010大米标准物质相比较,GBW10010a中As、Cd、Co、Cr、Cu、Hg、Mn、Mo、Ni、Zn等重金属元素含量显著下降,其中Cd、Cu、Zn降幅较大,分别下降约39%、43%、38.7%,一定程度上反映了农田生态环境的改善。本批标准物质定值元素总数量增加了6项,新增定值元素Ag、Nb（Nb给出参考值）,并且各项元素不确定度范围整体上有所缩小,如Al、Cd、Cu、Fe、K、Mg、Mo、Na、P、Pb、Se、Zn等对生物易有影响的重要元素,表明了地质分析测试方法技术的进步及定值水平的提高。本批标准物质定值元素涵盖了具有生物效应的大部分主微量元素,适用于农业生态环境地球化学调查与评价、生物样品测试、农产品质量与食品安全评价样品测试时的分析仪器校正、分析方法评价和分析质量监控等多个领域。  相似文献   

16.
样品用HNO3-HF高压密闭消解,电感耦合等离子体质谱测定海洋沉积物中15种稀土元素。研究了消解方法、酸体系和质谱干扰对稀土元素测定的影响。结果表明,相比于电热板消解和微波消解,高压密闭消解具有酸用量少、消解完全、消解过程损失少等优点;HNO3-HF体系能有效地分解海洋沉积物样品;利用干扰离子校正方程,能有效地校正Ba和轻稀土元素所形成的多原子离子干扰。15种稀土元素的方法检出限为3～15 ng/g。使用水系沉积物标准物质GBW 07309和GBW 07311、海底沉积物标准物质GBW 07313进行验证,测定值与标准值基本吻合,相对标准偏差和相对误差均低于5%。方法用于长江口沉积物样品的测定,精密度(RSD,n=6)小于5%,加标回收率为95.8%～104%。该方法检出限低,精密度和准确度高,适用于大批海洋沉积物样品的分析。  相似文献   

17.
鲁照玲  胡红云  姚洪 《岩矿测试》2012,31(2):241-246
分别采用HNO3-HF、HNO3-HF-HCl和HNO3-HF-H2O2三种消解体系,通过微波和PTFE密封罐电热板对土壤标准物质进行前处理,采用电感耦合等离子体质谱(ICP-MS)对样品中的重金属元素Cr、Ni、Cu、Zn、As、Cd和Pb进行定量分析。探讨了前处理试剂(主要为HNO3、HCl和HF)以及土壤基体效应对Cr、Ni、Cu、Zn、As、Cd和Pb定量分析的影响。研究结果表明,前处理试剂对Cr、Ni、Cu、Zn、As、Cd和Pb的定量分析具有不同程度的影响;对于土壤基体,在三种消解体系下均可观察到基体抑制效应;采用PTFE密封罐电热板消解方法前处理,待测元素及相同元素不同同位素的方法空白和检出限均较低,效果整体优于微波消解法。特别是HNO3-HF-HCl消解体系,通过选用52Cr、60Ni、65Cu、66Zn、75As和206Pb等同位素,重金属元素Cr、Ni、Cu、Zn、As、Cd和Pb的测定值均能保证在标准值的允许误差范围内,可以满足大批量土壤样品中重金属元素同时定量分析的需要,为高效准确地开展土壤的风险评估以及为土壤的修复治理提供科学依据。  相似文献   

18.
混合酸敞开或高压密闭溶样-ICPMS测定地质样品中稀土元素   总被引：9，自引：9，他引：0  
贾双琳  赵平  杨刚  孙霞  何海 《岩矿测试》2014,33(2):186-191
测定地质样品中的稀土元素时,用碱熔法处理样品过程繁琐,混合酸敞开酸溶法的酸种类多,用量较大,而微波消解法批次处理样品少,效率不高。本文比较了7种混合酸敞开酸溶体系、硝酸-氢氟酸高压密闭体系对样品溶样的效果,采用电感耦合等离子体质谱测定15个稀土元素的含量,建立了一套样品前处理体系简单、酸用量少、相对快捷的测定地质样品中稀土元素的方法。通过对59件国家标准物质的测试分析,结果表明硫酸-氢氟酸敞开酸溶和硝酸-氢氟酸高压密闭溶样两套体系的方法检出限、精密度、准确度均能达到地质行业相关标准测试要求。硫酸-氢氟酸敞开酸溶体系对于样品中钡含量较高,或样品量较少时适用;硝酸-氢氟酸高压密闭溶样体系的检出限更低,适用于大批量样品的分析测试。两套体系均不需要进行数学干扰校正,且酸用量少（最多6 mL）,分析效率高（平均每日分析测试300件）,有较大的推广应用价值。  相似文献   

19.
A basaltic certified reference material BEM, prepared by Chengdu University of Technology, has recently been approved as a Primary Grade Reference Material (GBW07126) by the General Administration of Quality Supervision, Inspection and Quarantine of China. BEM was sampled from the Emeishan Basalts in China, which is one of the largest basalt provinces in the world. After successfully completing homogeneity and stability tests, collaborative analyses were carried out in seventeen Chinese institutes and laboratories and two American laboratories. More than ten reliable analytical methods based on different principles of measurement were adopted, of which ICP-MS, NAA and ICP-AES contributed 60.5% of all results. Fifty-four elements and oxide components were characterised as certified values, four elements as recommended values and nine elements as information values. A minimum sampling mass of 40 mg for most elements is recommended for use.  相似文献   

20.
微波酸溶消解方法是测定固体废物中金属元素最主要的前处理方法,消解时使用不同的酸体系对测定结果有较大的影响。本文以国家土壤标准样品、固体废物标准样品和固体废物实际样品为材料,比较了在硝酸-盐酸、硝酸-氢氟酸、硝酸-盐酸-双氧水、硝酸-盐酸-氢氟酸-双氧水4种酸体系下,16种金属元素测定结果的差异以及在硝酸-盐酸和硝酸-盐酸-氢氟酸-双氧水酸体系下各元素的精密度和准确度。研究表明:一些土壤基体中加入氢氟酸能使Mo和Sb的回收率提高40%左右,固体废物样品中只有Sb的回收率能提高33%~50%。对于含氢氟酸的酸消解体系,改变硝酸和盐酸的比例,其测定结果没有明显差异;对于元素含量相差悬殊的铬渣样品,由于空间电荷效应,高浓度的Cr对V的测定有抑制作用。从方法的准确度和精密度来看,硝酸-氢氟酸-盐酸-双氧水的消解效果最好。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号