共查询到20条相似文献，搜索用时 348 毫秒
1.
考虑时间-空间变化的人工随机场模拟 总被引：4，自引：1，他引：4
采用随频率变化的视波速代替随意给定的视波速，并在随机场的模拟中引入相位差谱来考虑地震动的频率含量非平稳性．用谱表示法按不同的设计烈度生成了时间-空间变化的非平稳人工随机场，可用于大跨度空间结构多点激励的地震动输入． 相似文献
2.
Introduction For the seismic design of special structures such as nuclear power station, marine platform, long-span bridge and dam, generally the time-history response analysis of the structure under seismic excitation is imperative, which was coded in most seismic design codes. The earthquake records suitable for the seismic situation and site condition are necessary to be used as the seismic input in the dynamic analysis of structures. As a result of the limited observational condition of st… 相似文献
3.
强震仪和测震仪均能记录地面运动,强震仪输出的加速度记录主要用于分析结构地震反应,测震仪输出的速度记录常用于确定地震信息.由于这2种记录均描述地面运动,且覆盖结构地震反应分析所需频带范围,速度记录能否用于计算结构地震反应引起了人们的关注.为分析开源Hi-net速度记录用于计算结构地震反应时的精度,作者选取同台记录的加速度... 相似文献
4.
近场地震通常有显著的脉冲型高能输入,有必要从能量角度对现行抗震规范进行有效性检验,以探讨规范加速度设计谱能否体现近断层区域地震地面运动的能量耗散需求. 基于本文作者所建议的5%阻尼比下谱速度与输入能量等效速度之间关系,推导了与当前中、美主要抗震设计规范(GB50011-2001, UBC97)加速度谱相容的输入能量谱,并对其适用范围进行了讨论. 将其与基于实际近断层记录分组所得的输入能量设计谱进行对比表明, 我国GB50011-2001规范除软土场地的9度罕遇烈度外均难以体现近场地震的能量要求,有必要对设计谱平台高度进行调整;而美国UBC97规范则在除SA类场地之外的其它条件下均能较好地与15 km范围内的近场能量需求相吻合,从而也证明了本文推导方法的正确性. 相似文献
5.
For near-fault ground motion,there should be a remarkable impulsive energy supply. Therefore,it is essential to check the validity of actual seismic design codes with energy balance concept. Based on the relationship between the spectrum velocity and the input energy equivalent velocity with 5% damping ratio,the input energy spectra compatible with main China and USA seismic codes were derived,and the accuracy and applicability were veri-fied by using near-fault records. The recommended energy input design spectrum (EIDS) applicable to the distance of 0～15 km from fault was introduced to check the validity of modern seismic codes. Comparison tests show that the GB50011-2001 Code of China can just match the energy effect of near-fault ground motion to a certain extent only under seldom occurred earthquake with fortification intensity of 9 degree for site soil of Ⅲ and IV,indicating that the impact of near-fault effect has not been embodied in the current code acceleration spectrum. In order to make the design spectrum be applicable to near-fault region,it is necessary to adjust the spectrum platform pa-rameters. On the contrary,for distinct fault distance and site soil,the UBC97 Code of USA can match well with the energy supply of near-fault ground motion except for the site soil of hard rock (SA). Accordingly,correctness of the formula derivation in this paper is certified. 相似文献
6.
Vinay K. Gupta 《地震工程与结构动力学》2009,38(7):941-949
Response spectrum methods in earthquake‐resistant design sometimes require information on the spectral velocity (SV) for a given single‐degree‐of‐freedom oscillator and specified seismic hazard. SV has been conventionally approximated as pseudo spectral velocity (PSV) in the case of lightly damped structures that are not too flexible. This study shows that the PSV approximation may lead to large overestimation errors when the structure is stiffer to the ground motion and the ground motion is a long‐period motion. It is also shown that a new approximation requiring the use of peak ground acceleration of the motion may significantly reduce these errors. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
7.
利用天然地震记录数据提取其非平稳相位数据的方法、论证人造地震动方法的可行性和合理性,并以呼和浩特市基岩场地非平稳人造地震动预测拟合应用为例,进行人造地震动反应谱拟合.本研究方法明显加强地震监测数字化记录与结构地震动输入预测模拟的密切联系,使地震动预测因充分利用近场地震观测资料而得到质的飞跃. 相似文献
8.
利用数字化速度记录仿真加速度时程与合成场地设计地震波 总被引：3，自引：1，他引：2
研究利用测震台网数字化宽频带速度型记录仿真加速度时程,并通过提取其相位信息和拟合场地设计反应谱(目标谱)的方法来获得场地设计地震波的有关技术途径与应用实例,所提供的具体算式采用便于编程和利用快速傅氏变换(FFT)技术进行计算的离散化傅氏正逆变换的复数表达式。有关研究结果可拓宽现有地震观测资料的使用价值,减少地面运动模拟中人造地震波与原始地震记录存在的差异,并可使所合成的设计地震波满足给定的目标谱,且能较好地反映其非平稳性特征,因此在地震工程中具有实际的应用价值。 相似文献
9.
10.
本文以Futterman提出的地震波振幅衰减和相速度频散表达式为基础,从井震匹配的角度出发,推导了不进行反Q滤波、仅反Q滤波振幅补偿、仅反Q滤波相位补偿,以及反Q滤波相位与振幅同时补偿四种情况下,地震波速度频散与相速度及地震记录振幅谱间的表达式,并从理论上说明了反Q滤波相位补偿的必要性.通过相同观测系统,炸药震源和可控震源分别激发采集的零偏移距VSP资料实例,验证了本文所推导的速度频散表达式的合理性;通过井震标定实例,进一步说明了反Q滤波相位补偿,可有效消除地震子波速度频散,提升地面地震资料与零偏移距VSP走廊叠加剖面的匹配度,最终提高地震资料成果的可信度. 相似文献
11.
地震反应分析中输入界面选取合理与否对设计地震动参数有重要影响。基于唐山地区钻孔剖面,分别选取剪切波速为500m/s的硬黏土和800m/s的岩石顶面作为基岩输入界面,采用一维等效线性化方法讨论中硬场地输入界面的选取对地表地震动参数的影响,结果表明:(1)地表峰值加速度放大倍数及地表加速度反应谱特征周期都随输入界面深度的增加而递增,且这种递增与输入地震动的强度及频谱特性都有密切联系;(2)随着输入界面深度的增加,地表加速度反应谱几乎全频段内增大,仅在短周期内出现减小的情况,但幅度十分有限;(3)中硬场地地震反应分析中基岩输入界面宜取剪切波速为800m/s的土层顶面。 相似文献
12.
13.
In the seismic analysis and design of structures, the true velocity and absolute acceleration are usually approximated by their corresponding pseudo-values. This approach is simple and works well for structures with small damping (say, less than 15%). When the damping of a structure is enhanced for the purpose of response reduction, it may result in large analysis and design errors. Based on theory of random vibration and the established mechanism of seismic response spectra analysis, a method is developed (1) to predict the relative velocity spectra with any damping ratio level directly from the 5% standard pseudo-acceleration spectrum; and (2) to estimate the peak absolute acceleration. The accuracy of both is validated by using two selected ensembles of ground motion records. 相似文献
14.
The seismological model was developed initially from the fundamental relationship between earthquake ground motion properties and the seismic moment generated at the source of the earthquake. Following two decades of continuous seismological research in the United States, seismological models which realistically account for both the source and path effects on the seismic shear waves have been developed and their accuracy rigorously verified (particularly in the long and medium period ranges). An important finding from the seismological research by Atkinson and Boore and their co‐investigators is the similarity of the average frequency characteristics of seismic waves generated at the source between the seemingly very different seismic environments of Eastern and Western North America (ENA and WNA, respectively). A generic definition of the average source properties of earthquakes has therefore been postulated, referred to herein as the generic source model. Further, the generic ‘hard rock’ crustal model which is characteristic of ENA and the generic ‘rock’ crustal model characteristic of WNA have been developed to combine with the generic source model, hence enabling simulations to be made of the important path‐related modifications to ground motions arising from different types of crustal rock materials. It has been found that the anelastic contribution to whole path attenuation is consistent between the ENA and WNA models, for earthquake ground motions (response spectral velocities and displacements) in the near and medium fields, indicating that differences in the ENA and WNA motions arise principally from the other forms of path‐related modifications, namely the mid‐crust amplification and the combined effect of the upper‐crust amplification and attenuation, both of which are significant only for the generic WNA ‘rock’ earthquake ground motions. This paper aims to demonstrate the effective utilization of the latest seismological model, comprising the generic source and crustal models, to develop a response spectral attenuation model for direct engineering applications. The developed attenuation model also comprises a source factor and several crustal (wave‐path modification) component factors, and thus has also been termed herein the component attenuation model (CAM). Generic attenuation relationships in CAM, which embrace both ENA and WNA conditions, have been developed using stochastic simulations. The crustal classification of a region outside North America can be based upon regional seismological and geological information. CAM is particularly useful for areas where local strong motion data are lacking for satisfactory empirical modelling. In the companion paper entitled ‘response spectrum modelling for rock sites in low and moderate seismicity regions combining velocity, displacement and acceleration predictions’, the CAM procedure has been incorporated into a response spectrum model which can be used to effectively define the seismic hazard of bedrock sites in low and moderate seismicity regions. This paper and the companion paper constitute the basis of a long‐term objective of the authors, to develop and effectively utilize the seismological model for engineering applications worldwide. 相似文献
15.
本文以美国加州3次破坏性地震和2008年中国汶川Ms8.0地震中所获得的强震记录作为数据源,应用最小二乘法进行线性回归,得到了不同地震动参数与烈度间的相关性.统计发现,在地面加速度峰值、地面速度峰值等16种描述地震动强度的参数中,烈度识别正确率及相关性最好的两个参数分别是标准累积绝对速度和谱烈度. 相似文献
16.
相速度和群速度是研究地震波传播规律和描述介质特性的重要参数,是弹性波传播理论中的核心内容,在理论研究和实际应用中有重要作用.本文根据VTI介质的刚度矩阵,利用Bond变换建立了TTI介质刚度矩阵.再利用TTI介质刚度矩阵,结合弹性动力学的本构方程、牛顿运动微分方程和几何方程,得到了三维TTI介质弹性波波动方程和Christoffel方程.通过本征值方法求解Christoffel方程,推导了三维TTI介质弹性波相速度的解析表达式.利用Berryman和Crampin推导各向异性介质群速度公式,根据三维TTI介质的相速度解析式推导了三维TTI介质群速度解析表达式.数值试例表明,随着各向异性介质参数改变,TI介质弹性波相速度变化较为平缓,群速度变化较为剧烈,qP波和SH波速度变化较为平缓,qSV波速度变化较为剧烈. 相似文献
17.
本文基于与物理随机模型相对应的随机Fourier谱,通过对地震动非平稳性及其所受影响机制的分析,建立了非平稳地震动合成的新方法。通过引入基本相位差谱,并将初始相角视为随机变量,以相位差谱的分布特性、随机地震动的统计特征以及对结构随机反应的影响为原则,利用计算机程序生成相位差谱,提出了基于随机Fourier谱的合成地震动方法。同时,利用快速FFT技术提高合成精度。根据本文提出的合成方法获得的地震动具有非平稳特性,将为后续研究工作提供合理的地震动加速度时程。 相似文献
18.
19.
20.
就地震分布、震相质量、深度分布以及地震震级等,对辽宁测震台网2010-2017年地震观测报告进行分析,得到辽宁地区地震波主要震相的平均传播速度,分别为：Pn震相平均传播速度为7.87 km/s,Pg震相平均传播速度为4.48 km/s,Sn震相平均传播速度为4.48 km/s,Sg震相平均传播速度为3.56 km/s,认为引起震相走时偏差较大的主要原因为地震定位误差及震相不易识别。 相似文献