首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 230 毫秒
1.
本文选择酒石酸消除海水基体对铜信号的干扰,用塞曼石墨炉原子吸收法直接测定海水中的铜。从Cu的原子化曲线可知,加入酒石酸后,背景值减小,Cu原子吸收信号增强,且出现时间提前,表明酒石酸是有效的海水基体改进剂。用P.E.Z3030光谱仪测得双蒸水及海水中的元素Cu的特征质量(m。)分别为12.5pg及12.7pg;检测限分别为0.18μg/L和0.19μg/L,表明基体效应已消除,符合海洋监测要求。可用纯Cu标准溶液作校正曲线,以国家海洋局的两个标准海水样品中的Cu评定本法的准确度,相对偏差为0及-4.6%,与经典的经富集后的FAAS法的结果相比,相对偏差在3.0—6.5%范围内。用不同类型的光谱仪测定了30个海水样品,回收率在89—104%范围内。本法操作简便、快速。  相似文献   

2.
锰是生物新陈代谢过程中不可缺少的微量元素。海水中锰含量一般为1—40ppb。它在海水中的含量和分布,不仅对海洋生物圈有很大的影响,对海洋地球化学研究和海洋环境质量的评价也很有意义。所以研究海水中痕量锰的分析方法已广为人们重视。由于海水基体复杂,含有大量的氯化物盐类,而锰的含量又低,分析是困难的。虽然至今有不少用石墨炉原子吸收法测定海水中锰的研究报道,但大多数采用基体改善,或是离子交换、萃取分离的方法,以减轻分析中基体的干扰。近年来,随着无火焰原子吸  相似文献   

3.
高生泉 《海洋学报》1986,8(3):390-392
海洋沉积物和悬浮物样品基体组成十分复杂,而待测元素在样品中的含量也相差甚远,这给分析工作带来了一定的困难.石墨炉原子吸收法虽然具有灵敏度高,取样量少等优点,但存在着严重基体干扰[1-2].因此很多作者不得不采用费时的分离手段或标准加入法进行测定.本文应用自制简易石墨平台和基体改进技术以及峰面积测量相结合,直接测定了海洋沉积物和悬浮物中的镉、铅、铜.方法有效地消除了普遍石墨炉原子吸收测定法分析镉、铅时所遇到的基体干扰,使标准加入法曲线与标准工作曲线的斜率比接近1.0.方法简便快速,稳定可靠。  相似文献   

4.
合浦珠母贝精子的实验生物学初步研究   总被引:1,自引:0,他引:1  
用光镜观测了海水盐度、pH、温度和激素对合浦珠母口Pinctadafucata精子的激活及运动情况的影响。结果表明,在pH为8.0的自然海水(盐度为30)中,精子不被激活,在pH为9.0—11.5的范围内80%以上的精子能被激活,其中在pH为10.0时的激活率最高,精子活力最强。在pH为9.5的条件下,观察了精子在盐度为10—45范围内的精子活力。在盐度为15—45范围内精子都能被激活,其中在盐度为30左右激活率最高,精子活力最强。同时发现,氢氧化钠没有激活作用。合浦珠母贝精子对温度的适应性很强,在15—40℃内精子激活率都很高。绒毛膜促性腺激素(HCG)也可激活,在浓度为500IU·ml~-1时激活率最高,而促黄体素释放激素A_2(LHRH-A_2)则没有激活作用。  相似文献   

5.
海水中低含量铵氮的高灵敏度荧光法测定   总被引:3,自引:0,他引:3  
提出了一种改进的、可测定海水中低含量铵氮的高灵敏度荧光分析方法。其原理是在硼酸缓冲溶液的作用下,海水中的铵氮与邻苯二甲醛(OPA)发生衍生化反应,通过测定生成的荧光产物来确定水体中铵氮的浓度。方法的检测限极低(0.002 5μmol/L),重现性好,且水样用量少(10 mL),适用于海水中溶解有机物的光铵化研究及其他低铵含量水样的测定。  相似文献   

6.
一、前言 阳极溶出伏安法测定海洋生物中的铜、镉,一般都是在酸性介质中进行。实验发现,在酸性介质中(pH为1.5—2.5),用悬汞电极阳极溶出伏安法测定生物体中的铜、镉时,铜峰不太理想,往往影响了重现性和准确度。经过实验对比,本文提出采用硝酸-过氧化氢消化,制成1%盐酸溶液,而后在柠檬酸三铵-乙二胺介质的弱碱性条件下(pH为7.5—8.5)进行测定铜、镉,这样可以使得铜的溶出峰得到改善,重现性和准确度都获得满意的结果。  相似文献   

7.
使用多种改性方法对几种国产天然沸石进行改性处理,提高其铵氮吸附率,制备符合海水硝酸盐氮同位素预处理要求的沸石。发现重力筛选可提高沸石铵氮吸附率16%以上,钠改性及酸改性后钠改性可提高沸石铵氮吸附率80%以上,微波改性和超声波改性均可进一步提高沸石铵氮吸附率。改性处理后,几种沸石在酸性条件下对低浓度铵氮吸附率达90%以上,其氮同位素分馏较美国UOP沸石分馏系数更小,且更稳定。改性后的国产沸石更适于海水硝酸盐氮同位素预处理。应用改性后沸石对长江口海域硝酸盐水样进行了分析,结果表明,改性后沸石可以应用于海水中溶解态硝酸盐的氮同位素分析,为海水中溶解态氮的来源问题及循环机理研究等提供了有效信息。  相似文献   

8.
用次溴酸钠氧化法测定海水中氨氮的研究   总被引:8,自引:0,他引:8  
氨在海水中主要以铵离子形式存在,也含有适量的水合氨分子和游离氨分子,其比例随海水PH、温度而不同。海洋化学上所称氨含量或铵氮量是指三者含氮量的总和。海水中氨的含量甚微,年变化约在5~50毫克/立方米之间。一般采用比色法和分光光度法进行测定。氨—氮为海水中生原要素之一、是海藻类的主要氮素营养盐,它的  相似文献   

9.
热浸镀锌-5%铝钢材在海水中的氢脆敏感性   总被引:1,自引:0,他引:1       下载免费PDF全文
热浸镀锌-5%铝镀层钢材在海洋环境中使用时可能存在氢脆问题。采用慢应变速率拉伸实验法,结合扫描电镜分析,研究了锌-5%铝镀层钢材在海水中的氢脆敏感性。发现锌-5%铝镀层对钢材基体进行阴极保护引起的氢渗透,可显著降低钢材的断后延伸率和能量密度,使钢材的断裂方式由韧性向准解理转变,提高了其在海水中的氢脆敏感性。  相似文献   

10.
采用硼氢化纳还原法将海水中无机锡还原为挥发性锡化氢,氮为载气将锡化氢从反应器吹出,并于液氮冷阱中捕集,捕集后将锡化氢载入氢焰原子化器进行原子吸收测定。对该还原反应、氢化物转移、捕集及原子化实验条件进行了详细研究。实验结果表明:该法中可氢化元素As、Sb、Se等超过被测物浓度200倍时亦无明显干扰,检出限为0.0060μg/dm~3,对0.050μg/dm~3 Sn浓度的样品变异系数为±8%。标准曲线表明,在0—0.050μg/dm~3 Sn浓度范围内有理想的线性关系。对海水介质测定,该法所作校准曲线与蒸馏水介质具有相同的斜率,采用NaOH共沉淀预富集可提高灵敏度5—10倍,便于海水样品保存,总回收率95%以上。  相似文献   

11.
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.  相似文献   

12.
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.  相似文献   

13.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明:土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。  相似文献   

14.
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.  相似文献   

15.
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.  相似文献   

16.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics.  相似文献   

17.
18.
Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.  相似文献   

19.
20.
《海洋学报(英文版)》2014,(9):F0003-F0003
<正>Acta Oceanologica Sinica(AOS)is a comprehensive academic journal edited by the Editorial Committee of Acta Oceanologica Sinica and is designed to provide a forum for important research papers of the marine scientific community which reflect the information on a worldwide basis.The journal publishes scholarly papers on marine science and technology,including physics,chemistry,biology,  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号