首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 837 毫秒
1.
A tomographic inversion technique that inverts traveltimes to obtain a model of the subsurface in terms of velocities and interfaces is presented. It uses a combination of refraction, wide-angle reflection and normal-incidence data, it simultaneously inverts for velocities and interface depths, and it is able to quantify the errors and trade-offs in the final model. The technique uses an iterative linearized approach to the non-linear traveltime inversion problem. The subsurface is represented as a set of layers separated by interfaces, across which the velocity may be discontinuous. Within each layer the velocity varies in two dimensions and has a continuous first derivative. Rays are traced in this medium using a technique based on ray perturbation theory, and two-point ray tracing is avoided by interpolating the traveltimes to the receivers from a roughly equidistant fan of rays. The calculated traveltimes are inverted by simultaneously minimizing the misfit between the data and calculated traveltimes, and the roughness of the model. This 'smoothing regularization' stabilizes the solution of the inverse problem. In practice, the first iterations are performed with a high level of smoothing. As the inversion proceeds, the level of smoothing is gradually reduced until the traveltime residual is at the estimated level of noise in the data. At this point, a minimum-feature solution is obtained, which should contain only those features discernible over the noise.
The technique is tested on a synthetic data set, demonstrating its accuracy and stability and also illustrating the desirability of including a large number of different ray types in an inversion.  相似文献   

2.
This paper presents a method to invert underside-reflection ( P d P or S d S arrivals) data for lateral depth variations of upper-mantle discontinuities, combining traveltime and amplitude data. The method greatly improves the resolution of small-scale undulations obtained by existing imaging methods and does not suffer from the long-wavelength biases that are likely to be present in currently available models. Existing inversion methods account for the large size of the Fresnel zone of underside reflections, but not for its complexity, arising from the mini-max traveltime nature of PP- and SS -related waves. This neglect results in long-wavelength artefacts from small-scale undulations of the discontinuities, obscuring true long-wavelength depth variations. The inversion method presented in this paper uses a complex-valued sensitivity kernel, derived from the representation of underside reflections through a Kirchhoff integral formulation. The sensitivity kernel accounts for the varying sensitivity of the waveforms to discontinuity structure over the Fresnel zone. The method is applied to a large, synthetic data set. The data set consists of P d P amplitudes and traveltimes. The results show that the new inversion method resolves depth variations on a lateral scale that is smaller than the size of the Fresnel zone of individual underside reflections (but larger than the dominant wavelength), retaining the resolution of large-scale variations. The results presented here suggest that the discontinuity depth variations induced by slab penetration of the 670 discontinuity could be resolved by current broad-band P 670 P data sets.  相似文献   

3.
We investigate the sensitivity of finite-frequency body-wave observables to mantle anisotropy based upon kernels calculated by combining adjoint methods and spectral-element modelling of seismic wave propagation. Anisotropy is described by 21 density-normalized elastic parameters naturally involved in asymptotic wave propagation in weakly anisotropic media. In a 1-D reference model, body-wave sensitivity to anisotropy is characterized by 'banana–doughnut' kernels which exhibit large, path-dependent variations and even sign changes. P -wave traveltimes appear much more sensitive to certain azimuthally anisotropic parameters than to the usual isotropic parameters, suggesting that isotropic P -wave tomography could be significantly biased by coherent anisotropic structures, such as slabs. Because of shear-wave splitting, the common cross-correlation traveltime anomaly is not an appropriate observable for S waves propagating in anisotropic media. We propose two new observables for shear waves. The first observable is a generalized cross-correlation traveltime anomaly, and the second a generalized 'splitting intensity'. Like P waves, S waves analysed based upon these observables are generally sensitive to a large number of the 21 anisotropic parameters and show significant path-dependent variations. The specific path-geometry of SKS waves results in favourable properties for imaging based upon the splitting intensity, because it is sensitive to a smaller number of anisotropic parameters, and the region which is sampled is mainly limited to the upper mantle beneath the receiver.  相似文献   

4.
Symmetric tensors are typically encountered during investigations associated with stress and strain analysis and, thus, they are of particular interest to geophysicists and geodesists. Furthermore, symmetric tensors are studied using eigentheory analysis which provides the decomposition of the tensor on its principal components (n independent eigenvalues and the corresponding eigenvectors). In this paper, an analytical expression of the covariance matrix of the eigenvalues and eigenvectors of an n-D symmetric tensor is derived based on the principles of linear algebra and differential calculus. Through numerical tests, the proposed formulation is proven to give realistic uncertainty estimates of the determined eigenparameters. The methodology also reveals the significant impact on uncertainty assessments when the parameter dependencies between principal components are neglected.  相似文献   

5.
Inversion of seismic attributes for velocity and attenuation structure   总被引：1，自引：0，他引：1  
We have developed an inversion formuialion for velocity and attenuation structure using seismic attributes, including envelope amplitude, instantaneous frequency and arrival times of selected seismic phases. We refer to this approach as AFT inversion for amplitude, (instantaneous) frequency and time. Complex trace analysis is used to extract the different seismic attributes. The instantaneous frequency data are converted to t * using a matching procedure that approximately removes the effects of the source spectra. To invert for structure, ray-perturbation methods are used to compute the sensitivity of the seismic attributes to variations in the model. An iterative inversion procedure is then performed from smooth to less smooth models that progressively incorporates the shorter-wavelength components of the model. To illustrate the method, seismic attributes are extracted from seismic-refraction data of the Ouachita PASSCAL experiment and used to invert for shallow crustal velocity and attenuation structure. Although amplitude data are sensitive to model roughness, the inverted velocity and attenuation models were required by the data to maintain a relatively smooth character. The amplitude and t * data were needed, along with the traveltimes, at each step of the inversion in order to fit all the seismic attributes at the final iteration.  相似文献   

6.
We develop a systematic approach to the phase identification of late-arriving groups in 2-D seismic data. Waveforms in the same traveltime branch are grouped, and synthetic traveltimes for all phases are calculated using an initial approximation to the 2-D structure. For each group, we identify the two synthetic phases providing the smallest RMS residuals. If their ratio is less than some predetermined threshold, then the group's phase is ambiguous and both assignments must be tested by traveltime inversion. If there are n unidentified groups, we construct 2 n phase tables and perform a traveltime inversion on every plausible phase assignment. The phase table that provides the highest value of the posterior probability density is taken as correct, and a 2-D velocity model is constructed from the data. This approach is shown to be effective and efficient on both simulated and real data. In addition, the residuals associated with late-arriving groups provide a means of identifying deficiencies in the initial model.  相似文献   

7.
Seismic tomography has been one of the primary tools to image the interior of the earth and other elastic structures. To date the inversions of compressional ( P ) and shear ( S ) wave speeds have been carried out separately under the assumption that P traveltimes are affected only by the P wave speed of the elastic media and S traveltimes by the S wave speed. Using numerical and analytical solutions, we show that for finite-frequency seismic waves, S wave speed perturbations may have significant effects on P waveforms. This suggests that when waveform-derived traveltime and amplitude anomalies are used in tomographic inversions, the P -wave measurements should be related to not only P wave speed perturbations but also S wave speed perturbations.  相似文献   

8.
We propose a method to evaluate the existence of spatial variability in the covariance structure in a geographically weighted principal components analysis (GWPCA). The method, that is extensive to locally weighted principal components analysis, is based on performing a statistical hypothesis test using the eigenvectors of the PCA scores covariance matrix. The application of the method to simulated data shows that it has a greater statistical power than the current statistical test that uses the eigenvalues of the raw data covariance matrix. Finally, the method was applied to a real problem whose objective is to find spatial distribution patterns in a set of soil pollutants. The results show the utility of GWPCA versus PCA.  相似文献   

9.
Velocity estimation remains one of the main problems when imaging the subsurface with seismic reflection data. Traveltime inversion enables us to obtain large-scale structures of the velocity field and the position of seismic reflectors. However, as the media currently under study are becoming more and more complex, we need to know the finer-scale structures. The problem is that below a certain range of velocity heterogeneities, deterministic methods become difficult to use, so we turn to a probabilistic approach. With this in view, we characterize the velocity field as a random field defined by its first and second statistical moments. Usually, a seismic random medium is defined as a homogeneous velocity background perturbed by a small random field that is assumed to be stationary. Thus, we make a link between such a random velocity medium (together with a simple reflector) and seismic reflection traveltimes. Assuming that the traveltimes are ergodic, we use 2-D seismic reflection geometry to study the decrease in the statistical traveltime fluctuations as a function of the offset (the source–receiver distance). Our formulae are based on the Rytov approximation and the parabolic approximation for acoustic waves. The validity and the limits are established for both of these approximations in statistically anisotropic random media. Finally, theoretical inversion procedures are developed for the horizontal correlation structure of the velocity heterogeneities for the simplest case of a horizontal reflector. Synthetic seismograms are then computed (on particular realizations of random media) by simulating scalar wave propagation via finite difference algorithms. There is good agreement between the theoretical and experimental results.  相似文献   

10.
Uniformly asymptotic formulae for edge-and-vertex diffraction in the time-domain, involving elementary functions of time, traveltimes and GTD amplitudes, are derived. Explicit expressions for diffraction at a pyramid and a triangle are constructed. They can be applied to the numerical calculation of a field reflected and diffracted at 3-D objects with sharp edges and to reflection from triangulated surfaces. the computational cost is very low.  相似文献   

11.
The BABEL marine seismic experiment has been carried out to investigate the lithospheric structure and antecedent tectonic signatures of the Baltic Shield, including the Archaean-Proterozoic collisional structure in the northern part of the Gulf of Bothnia.
Lithospheric seismic-reflection streamer data and simultaneously recorded wide-angle reflection and refraction data collected in the Gulf of Bothnia as part of the BABEL project have been used for 3-D modelling. The distribution of land stations around the Gulf provides a good 3-D ray coverage of the PMP reflection data recorded at the eight stations in the area and allows an estimation of strikes and dips of the Moho boundary in the area. The traveltimes of reflected phases are calculated using a method that utilizes the finite-difference solution of the eikonal equation. The Moho wide-angle-reflection (PMP) traveltimes are modelled using an inversion method. A 2-D model from the Gulf of Bothnia extended into the third dimension is used as an initial model. During the inversion the velocity is kept constant and only the Moho boundary is allowed to vary. To estimate the strike of the Moho boundary and the stability of the inversion, two initial models with different strikes are examined.
The results indicate that the Moho depth in the Gulf of Bothnia undulates and has a maximum depth of 55 km in the south, rising to 42 km in the north. The Moho depth variations seem to be step-like. This change in the Moho depth coincides with the location of the presumed fossil subduction zone in the area. The crustal-thickness variations seem to be well approximated by a nearly 2-D structure striking parallel to a postulated subduction zone immediately to the south of the Skellefte area. The presence of the step at the crust/mantle boundary can be interpreted as a result of a plate-collision event at about 2 Ga.  相似文献   

12.
We test the feasibility of using Green's functions extracted from records of ambient seismic noise to monitor temporal changes in the Earth crust properties by repeated measurements at regional distances. We use about 11 yr of continuous recordings to extract surface waves between three pairs of stations in California. The correlations are computed in a moving 1-month window and we analyse the temporal evolution of measured interstation traveltimes. The comparison of the arrival times in the positive and negative correlation time of Rayleigh and Love waves allows us to separate time-shifts associated with any form of physical change in the medium, those resulting from clock drift or other instrumental errors, and those due to change in the localization of the noise sources. This separation is based on the principle of time symmetry. When possible, we perform our analysis in two different period bands: 5–10 and 10–20 s. The results indicate that significant instrumental time errors (0.5 s) are present in the data. These time-shifts can be measured and tested by closure relation and finally corrected independently of any velocity model. The traveltime series show a periodic oscillation that we interpret as the signature of the seasonal variation of the region of origin of the seismic noise. Between 1999 and 2005, the final arrival time fluctuations have a variance of the order of 0.01 s. This allows us to measure interstation traveltimes with errors smaller than 0.3 per cent of the interstation traveltime and smaller than 1 per cent of the used wave period. This level of accuracy was not sufficient to detect clear physical variation of crustal velocity during the considered 11 yr between the three stations in California. Such changes may be more easily detectable when considering pairs of stations more closely located to each other and in the vicinity of tectonically active faults or volcanoes.  相似文献   

13.
The Non-linear lterative Partial Least Squares(NIPALS)algorithm is used in principal componentanalysis to decompose a data matrix into score vectors and eigenvectors(loading vectors)plus a residualmatrix.N1PALS starts with some guessed starting vector.The principal components obtained by NIPALSdepends on the starting vector;the first principal component could not always be computed.Wold hassuggested a starting vector for NIPALS,but we have found that even if this starting vector is used,thefirst principal component cannot be obtained in all cases.The reason why such a situation occurs isexplained by the power method.A simple modification of the original NIPALS procedure to avoid gettingsmaller eigenvalues is presented.  相似文献   

14.
This paper presents a geometrically based algorithm for computing synthetic seismograms for energy transmitted through a 3-D velocity distribution. 3-D ray tracing is performed to compute the traveltimes and geometrical spreading (amplitude). The formulations of both kinematic and dynamic ray-tracing systems are presented. The two-point ray-tracing problem is solved by systematically updating the initial conditions and adjusting the ray direction until the ray intersects the specified endpoint. The amount of adjustment required depends on the derivatives of the position with respect to the given starting angles between consecutive rays. The algorithm uses derivatives to define the steepest-descent direction and to update the initial directions. The convergence rate depends on the complexity of the model.
Test seismograms compare favourably with those from a 2-D asymptotic ray theory algorithm and a 3-D Gaussian-beam algorithm. The algorithm is flexible in modelling arbitrary source and recorder geometries for various smoothly varying 3-D velocity distributions. The algorithm is further tested by simulating surface-to-tunnel vibroseis field data. Shear waves as well as compressional waves may be approximately included. Application of the algorithm to a data set from the Rainier Mesa of the Nevada Test Site produced a good fit to the transmitted (first arrival) traveltimes and amplitudes, with approximately 15 per cent variation in the local 3-D velocity.  相似文献   

15.
The presence of anisotropy requires that tomographic methods be generalized to account for anisotropy. This generalization allows geological structure to be correctly imaged and allows the anisotropic parameters to be estimated. Use of isotropic inversion for imaging anisotropic structures gives systematic trends in the traveltime and polarization residuals. However, due to the limited directional coverage, the traveltimes along may not be sufficient to study the anisotropic properties of the structure. Polarizations can provide independent information on the structure. Traveltime and polarization inversion are applied to synthetic examples simulating VSP experiments. Transverse isotropy and 1-D structure are assumed. Plots of traveltime and polarization residuals are an important tool to detect the anomalies due to the presence of anisotropy. For receivers located in anisotropic layers, polarization residuals display consistent anomalies of several degrees. The synthetic examples show that even the simple 1-D problem is difficult, when using direct arrivals only. Large a posteriori errors in anisotropic parameters are obtained by traveltime inversion in layers where available incidence angles are less than 45°. Resolution of the tomographic image of VSP data is greatly improved by a combination of traveltime and polarization information. In order to obtain accurate inversion results, the measurement error of polarization data should be kept to within a few degrees.  相似文献   

16.
An inversion method is presented for the reconstruction of interface geometry between two or more crustal layers from teleseismic traveltime residuals. The method is applied to 2-D models consisting of continuous interfaces separating constant-velocity layers. The forward problem of determining ray paths and traveltimes between incident wave fronts below the structure and receivers located on the Earth's surface is solved by an efficient and robust shooting method. A conjugate gradient method is employed to solve the inverse problem of minimizing a least-squares type objective function based on the difference between observed and calculated traveltimes. Teleseismic data do not accurately constrain average vertical structure, so a priori information in the form of layer velocities and average layer thicknesses is required. Synthetic tests show that the method can be used to reconstruct interface geometry accurately, even in the presence of data noise. Tests also show that, if layer velocities and initial interface positions are poorly chosen, lateral structure is still recoverable. The inversion method was applied to previously published teleseismic data recorded by an in-line array of portable seismographs that traversed the northern margin of the Musgrave Block, central Australia. The solution based on interface parametrization is consistent with models given by other studies that used the same data but different methods, most notably the standard tomographic approach that inverts for velocity rather than interface structure.  相似文献   

17.
The eikonal equation is the equation of the phase slowness surface for isotropic and anisotropic media. In general anisotropic media, there is no simple explicit expression for the phase slowness surface. An approximate expression of the eikonal equation may be obtained in weakly anisotropic media. In orthorhombic media, the approximate eikonal equation of the qP wave is the sum of an ellipsoidal form and a more complicated term. The ellipsoidal form corresponds to what we call ellipsoidal anisotropy. Ray equations written in the Hamiltonian formulation are characteristics of the eikonal equation. Ray perturbation theory may be used to compute changes in ray paths and physical attributes (traveltime, polarization, amplitude) due to changes in the medium with respect to a reference medium. Examples obtained in homogeneous orthorhombic media show that a reference medium with ellipsoidal anisotropy is a better choice to develop the perturbation approach than an isotropic reference medium. Models with strong anisotropy can be considered. The comparison with results obtained by an exact ray program shows a relative traveltime error of less than 0.5 per cent for a model with relatively strong anisotropy. We propose a finite element approach in which the medium is divided into a set of elements with polynomial elastic parameter distributions. Inside each element, using a perturbation approach, analytical expressions for rays and traveltimes are obtained Ray tracing reduces to connecting these analytical solutions at the vertices of the cells.  相似文献   

18.
A new algorithm is presented for the integrated 2-D inversion of seismic traveltime and gravity data. The algorithm adopts the 'maximum likelihood' regularization scheme. We construct a 'probability density function' which includes three kinds of information: information derived from gravity measurements; information derived from the seismic traveltime inversion procedure applied to the model; and information on the physical correlation among the density and the velocity parameters. We assume a linear relation between density and velocity, which can be node-dependent; that is, we can choose different relationships for different parts of the velocity–density grid. In addition, our procedure allows us to consider a covariance matrix related to the error propagation in linking density to velocity. We use seismic data to estimate starting velocity values and the position of boundary nodes. Subsequently, the sequential integrated inversion (SII) optimizes the layer velocities and densities for our models. The procedure is applicable, as an additional step, to any type of seismic tomographic inversion.
We illustrate the method by comparing the velocity models recovered from a standard seismic traveltime inversion with those retrieved using our algorithm. The inversion of synthetic data calculated for a 2-D isotropic, laterally inhomogeneous model shows the stability and accuracy of this procedure, demonstrates the improvements to the recovery of true velocity anomalies, and proves that this technique can efficiently overcome some of the limitations of both gravity and seismic traveltime inversions, when they are used independently.
An interpretation of field data from the 1994 Vesuvius test experiment is also presented. At depths down to 4.5 km, the model retrieved after a SII shows a more detailed structure than the model obtained from an interpretation of seismic traveltime only, and yields additional information for a further study of the area.  相似文献   

19.
A self-adaptive automated parametrization approach is suggested for the sequential inversion of controlled-source seismic tomography and gravity data. The velocities and interfaces are parametrized by their Haar wavelet expansion coefficients. Only those coefficients that are well constrained by the data, as measured by the number of rays that cross the corresponding wavelet function support area and their angular coverage, are inverted for, others are set to zero. This approach results in a reasonable distribution of resolution throughout the model even in cases of irregular ray coverage and does overcome the trade-off between different types of model parameters. A modified sequential inversion approach is suggested to join the traveltimes and gravity anomalies inversion. An algorithm is developed that inverts for smooth velocity and density variations inside the seismic layer, the position of its bottom interface as well as for optimal values of the velocity-to-density regression coefficients. The algorithm makes use of direct (diving), reflected and head (critically refracted) wave traveltimes. The algorithm workflow is demonstrated on a synthetic data example.  相似文献   

20.
A large data set of amplitude measurements of minor and major arc Rayleigh waves in the period range 73–171 s is collected. By comparing these amplitudes with the amplitudes of synthetic waveforms calculated by mode summation, maps of lateral variations in the apparent attenuation structure of the Earth are constructed. An existing formalism for predicting the effects of focusing is employed to calculate amplitude perturbations for the same data set. These perturbations are used to construct 'pseudo‐attenuation' maps and these results are compared with the apparent attenuation maps calculated from the data. It is shown that variations in Rayleigh wave amplitude perturbations in the Earth are dominated by attenuation at long wavelengths (below about degree 8) and by elastic structure at shorter wavelengths. It is also shown that the linear approximation for focusing is successful at predicting Rayleigh wave amplitudes using existing phase velocity maps. These results indicate that future attempts to model the velocity structure of the Earth would be assisted by incorporating amplitude data and by jointly inverting for Q structure.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号