共查询到20条相似文献，搜索用时 93 毫秒
1.
根据地源热泵工程试验场两年监测数据,分析了地下换热区地温场分布特征以及地源热泵系统短期运行对地质环境的热影响效应。换热区地温场分布主要受气温、建筑冷热负荷、原始地温、岩土导热系数、与换热孔距离等因素影响。在吸排热比基本平衡的条件下,地源热泵系统对地质环境的热影响较小。选择合理的埋管间距,充分利用地源热泵的热回收功能,采用冷却塔—地埋管、地表水—地埋管等复合系统,有助于消除吸排热比不平衡现象。 相似文献
2.
风力发电工程是我国乃至世界可持续发展之路的重要一步,而梁板式风机基础是陆上风机基础的一种新型形式,梁板式风机基础的研究正受到学术界和工程领域的广泛关注。基于江苏射阳港风电项目,通过在风机基础底板下埋设土压力盒,桩内布设钢筋计,测算风机基础从风机施工至正常运行过程中的基底土压力分布和桩顶轴力。重点讨论风机处于施工过程中和正常运行状态下桩顶轴力的变化规律,分析桩土分担比,并将现场试验得到的基础内力与实际设计方法计算所得基础内力进行对比验证。结果表明,风机运行前,竖向荷载主要由内圈桩承担,风机运行后,外圈桩承担荷载增加,内圈桩承担荷载减小;风机运行后土体承担荷载较大,目前的设计方法不考虑土体的承载作用,计算结果偏于安全。 相似文献
3.
地埋管地源热泵系统开发利用前景广阔,本文尝试采用基于圆柱热源理论的柱模型,在天津市静海县团泊新城,为某竖直地埋管建设项目设计了2组取热和2组排热工况热响应测试试验,为地源热泵系统优化设计与节能运行,提供了必要的数据依据。同时我们还总结了热响应测试过程中应该注意的问题,为以后工作提供了建议。 相似文献
4.
地埋管地源热泵工程在发挥供暖、制冷等作用的同时,埋管区地层温度场也发生了复杂的结构性变化,陕西地区对地下岩土体温度场影响机制研究不够深入,对热泵工程可持续利用的调控带来困难。本文依托陕西省浅层地热能开发利用示范研究基地,分析地源热泵系统稳定运行2 a及疫情影响下停止运行1a地埋管换热区的温度监测数据,研究地埋管换热区地层温度的垂向深度及平面展布特征。结果显示：系统稳定运行2 a,换热区各区域地温在时间尺度上受地埋管换热器吸排热量的影响呈波状变化,并且相较于环境温度变化表现出不同的时滞性,距离换热器越远时滞性越强;在地埋管长度以内,随着深度增加,温度波动减小;在水平向,距离地埋管越远温度波动越小,单根换热器对地温的影响半径为3.2～3.9 m;系统稳定运行2 a地埋管换热器吸排热量基本平衡,未造成地质体冷热堆积,停止运行1 a,由于吸排热量不均衡造成了地质体存在冷堆积,调控运行热泵系统可使冷堆积现象消失。该文旨在系统地分析关中盆地地源热泵工程对地温场的影响机制特征,为地源热泵平稳运行提供基础数据支持,为区域地热资源的科学、长期开发提供理论依据。 相似文献
5.
6.
介绍了全空气定风量系统与风机盘管结合在商场等大空间中的应用—利用风机盘管承担靠近外维护结构的外区负荷,利用全空气定风量系统承担室内负荷及新风负荷。给出了该系统过渡季全新风的运行方式及空调自控要求。 相似文献
7.
成都至贵阳客运专线南厂沟浅埋大跨度隧道下穿公路,重载车辆繁多,对隧道施工安全及道路行车安全造成威胁。采用FLAC3D软件分别对无行车条件下和行车荷载作用下施工过程进行了数值模拟,对比分析了两种工况下的受力及变形,结果表明,行车荷载对该隧道施工影响较小。下穿施工过程及监测数据分析表明,南厂沟隧道下穿公路数值模拟是合理的,为顺利施工提供了有益指导。 相似文献
8.
9.
10.
利用两种热响应测试方式( 恒热流法和恒温法) 进行地埋管地源热泵换热试验,测试该地的土壤热物性参数。在概述了两种浅层岩土体热物性原位测试仪的原理、特点、测试方法及数据处理方法的基础上,分析比较了两种方法测量的参数,准确地计算出施工现场土壤的热物性参数。两种测试仪测量的热物性参数基本一致,同时热工况或冷工况试验所取得的参数差别不大。在20℃ ～ 30℃排热工况条件下,换热器为120 m 双U 类型时,排热量在25 ～ 60 W/m,在8 ℃取热工况条件下,取热量约30 W/m。热导率约1. 5 W/m·℃,热扩散率约为0. 46 × 10 － 6 m3 /s。 相似文献
11.
Alan M. Jacobs 《Mathematical Geology》1971,3(3):227-238
Relative percentages of sand, silt, and clay from samples of the same till unit are not identical because of different lithologies in the source areas, sorting in transport, random variation, and experimental error. Random variation and experimental error can be isolated from the other two as follows. For each particle-size class of each till unit, a standard population is determined by using a normally distributed, representative group of data. New measurements are compared with the standard population and, if they compare satisfactorily, the experimental error is not significant and random variation is within the expected range for the population. The outcome of the comparison depends on numerical criteria derived from a graphical method rather than on a more commonly used one-way analysis of variance with two treatments. If the number of samples and the standard deviation of the standard population are substituted in at-test equation, a family of hyperbolas is generated, each of which corresponds to a specific number of subsamples taken from each new sample. The axes of the graphs of the hyperbolas are the standard deviation of new measurements (horizontal axis) and the difference between the means of the new measurements and the standard population (vertical axis). The area between the two branches of each hyperbola corresponds to a satisfactory comparison between the new measurements and the standard population. Measurements from a new sample can be tested by plotting their standard deviation vs. difference in means on axes containing a hyperbola corresponding to the specific number of subsamples used. If the point lies between the branches of the hyperbola, the measurements are considered reliable. But if the point lies outside this region, the measurements are repeated. Because the critical segment of the hyperbola is approximately a straight line parallel to the horizontal axis, the test is simplified to a comparison between the means of the standard population and the means of the subsample. The minimum number of subsamples required to prove significant variation between samples caused by different lithologies in the source areas and sorting in transport can be determined directly from the graphical method. The minimum number of subsamples required is the maximum number to be run for economy of effort. 相似文献
12.
Summary Finite element analyses were conducted to investigate the magnitude of tensile strains imposed on landfill liners due to the
formation of subsurface cavities. The study incorporated the significance of using geogrids to reduce the magnitude of strains
and possibly the potential for collapse of landfill liners. Variations of key parameters included depth of overburden (D) and diameter of the cavity (B). Estimated stress distributions were compared to theoretical values obtained from a model reported in the literature.
Results indicated that, contrary to conventional wisdom, the critical area based on the mechanics of arching was above the
edge of the cavity where stress concentration occurred. Incorporation of geogrid reinforcement reduced the magnitude of tensile
strains. The tensile force in the geogrid was dependent upon the size of the cavity, the depth of the overburden, and the
applied pressure. 相似文献
13.
The penetration of rigid objects such as piles and penetrometers into soils creates a zone of soil disturbance around them. The extent of this disturbed zone influences the resistance of the moving rigid body. This paper presents a theoretical framework to analyze the resistance in the disturbed zone created by a shaft penetrating a clay soil. The soil is modeled as a viscous material after it reaches failure [critical state (CS)]. The results of this analysis show that the viscous drag stress component on the shaft surface is influenced by the size of disturbed zone that has reached CS around the shaft, the shear viscosity of the soil and the velocity profile (or strain rate) in the CS zone around the shaft. The size of CS zone, the velocity profile and the viscosity of soil are interdependent. Large variation in viscous drag occurs when the size of the CS soil zone is less than four times the shaft’s radius. Limiting drag occurs when the size of the CS soil zone exceeds six times the shaft’s radius. The theoretical velocity distribution of the movement of soil in the CS zone shows that the soil is dragged along with shaft in the near field (close to the shaft surface) and moves upwards in the far field. 相似文献
14.
文中描述了产自广西桂林地区下石炭统黄金组下部的颅形贝属一新种,桂林颅形贝(Cranaena guilinensis)。新种以平直的前结合缘和背壳上发育中槽为特征。在4枚标本上发现保存有放射状的彩色条带,表明该种当时生活在温暖海域的浅水环境。对该属70个种的地质地理分布和生物多样性变化的初步分析表明,该属可能起源于早泥盆世欧美大陆西北缘的老世界区,之后的地理分布和生物多样性发展以北美地区为中心,经历了中泥盆世—晚泥盆世早期和早石炭世2次比较明显的辐射演化、迁移扩散高峰和晚泥盆世晚期的1次严重衰退。第1次高峰是中泥盆世—晚泥盆世早期,该属的生物多样性达到巅峰,生物地理分布范围扩大到欧美大陆之外的西伯利亚板块、哈萨克斯坦板块和华南板块等;第2次高峰是早石炭世,该属的生物多样性虽不及前一次,但获得了最广泛的地理分布,不仅在北方大陆有分布,而且已进入到冈瓦纳大陆边缘。晚泥盆世晚期该属的1次严重衰退显然与F/F灭绝事件有关。早石炭世之后,该属进入衰退阶段,最终在二叠纪初灭绝。 相似文献
15.
Neil A. H. Pickard Gareth Li. Jones John G. Rees Ian D. Somerville Peter Strogen 《Geological Journal》1992,27(1):35-58
Stratigraphic units are defined and described for the Lower Carboniferous succession in the Walterstown-Kentstown area of Co. Meath, Ireland. A complete (unexposed) Courceyan succession from the terrestrial red bed facies of the Baronstown Formation to the Moathill Formation of the Navan Group has been penetrated in several boreholes. Although the lower part of the sequence is comparable with the Courceyan succession at Navan and Slane, the middle part of the sequence differs markedly in the Walterstown-Kentstown area and two new members, the Proudstown and Walterstown Members, are defined in the upper part of the Meath Formation. Syndepositional faulting was initiated during the Courceyan, probably in latest Pseudopolygnathus multistriatus or early Polygnathus mehli latus time. Movement on the ENE trending St. Patrick's Well Fault influenced the deposition of the Walterstown Member and the overlying Moathill Formation and was probably associated with the development of the East Midlands depocentre to the south of the area. A second episode of tectonism in the latest Courceyan or early Chadian resulted in uplift and erosion and the development of ‘block and basin’ sedimentation. Subsequent transgression of the uplifted block led to the establishment of the Kentstown Platform, bounded to the north, west and south by rocks of basinal facies. The Milverton Group (Chadian-Asbian), confined to this platform, unconformably overlies Courceyan or Lower Palaeozoic strata and is subdivided into three formations: Crufty Formation (late Chadian), Holmpatrick Formation (late Chadian-Arundian) and Mullaghfin Formation (late Arundian-Asbian). The Walterstown Fault controlled the western margin of the Kentstown Platform at this time. Contemporaneous basinal sediments of the Fingal Group (Lucan and Naul Formations) accumulated to the west of the Walterstown Fault and are much thicker than age-equivalent platform facies. Platform sedimentation ceased in latest Asbian to early Brigantian time with tectonically induced collapse and drowning of the platform; platform carbonates of the Mullaghfin Formation are onlapped northwards by coarse proximal basinal facies of the Loughshinny Formation. A distinct gravity anomaly in the Kentstown area suggests the presence of a granitoid body within the basement. The Kentstown Platform is therefore considered to have formed on a buoyant, granite-cored, footwall high analogous to the Askrigg and Alston Blocks of northern England. 相似文献
16.
Neil A. H. Pickard John G. Rees Peter Strogen Ian D. Somerville Gareth L. I. Jones 《Geological Journal》1994,29(2):93-117
Shallow water platform limestones of the Chadian–Asbian Milverton Group are restricted to the north-eastern part of the Lower Carboniferous (Dinantian) Dublin Basin. Here, they are confined to two granite-cored fault blocks, the Kentstown and Balbriggan Blocks, known to have been active during the late Dinantian. Three areas of platform sedimentation are delimited (the Kentstown, Drogheda and Milverton areas), although in reality they probably formed part of a single carbonate platform. Resedimented submarine breccias and calciturbidites (Fingal Group) composed of shallow water allochems and intraclasts sourced from the platform accumulated, along with terrigenous muds, in the surrounding basinal areas. Sedimentological evidence suggests that the Kentstown and Balbriggan Blocks possessed tilt-block geometries and developed during an episode of basin-wide extensional faulting in late Chadian time. Rotation of the blocks during extension resulted in the erosion of previously deposited sequences in footwall areas and concomitant drowning of distal hangingwall sequences. Antithetic faults on the northern part of the Balbriggan Block aided the preferential subsidence of the Drogheda area and accounts for the anomously thick sequence of late Chadian platform sediments present there. Continued subsidence and/or sea-level rise in the late Chadian–early Arundian resulted in transgression of the Kentstown and Balbriggan Blocks; carbonate ramps developed on the hangingwall dip slopes and transgressed southward with time. Subsequent progradation and aggradation of shallow water sediments throughout the Arundian to Asbian led to the development of carbonate shelves. Several coarse conglomeratic intervals within the contemporaneous basinal sequences of the Fingal Group attest to periodic increases of sediment influx associated with the development of the shelves. Sedimentological processes controlled the development of the carbonate platforms on the hangingwall dip slopes of the Kentstown and Balbriggan Blocks, though periodic increases of sediment flux into the basinal areas may have been triggered by eustatic falls in sea level. In contrast, differential subsidence along the bounding faults of these blocks exerted a strong control on the margins of the late Dinantian shelves, maintaining relatively steep slopes and inhibiting the progradation of the shelves into the adjacent basins. Tectonically induced collapse and retreat of the platform margins occurred in the late Asbian–early Brigantian. Platform sediments are overlain by coarse-grained proximal basinal facies which fine upwards before passing into a thick shale sequence, indicating that by the late Brigantian carbonate production had almost stopped as the platforms were drowned. 相似文献
17.
The explanation normally given for the tectonics of Sainte-Victoire Mountain, a dozen kilometres east of Aix-en-Provence, to the north of the limestone Provence, is incorrect. To the east, the morphology of the Sainte-Victoire is subdued, whereas to the west, before the mountain breaks savagely, the morphology is that of a young mountain as appears in Alpine landscapes. This unusual aspect in the region and the large subvertical faults with vertically striated surfaces that mark the massif to the south and to the west, induce the idea of strong vertical uplifts and caste doubt on the tectonic interpretation given in 1962 by Corroy et al. According to those authors, the Sainte-Victoire is a unit of Jurassic and Cretaceous formations overthrusting 1800 m to the south conglomerates of the Late Cretaceous or Palaeocene. New observations about the conglomerate transgression over the Jurassic and Cretaceous beds, and about the faults around and on the massif do not give evidence of an overthrusting but, on the contrary, induce the idea of a uplift, perhaps still active, in the form of a ‘piano key’ inclined to the northeast. To cite this article: J. Ricour et al., C. R. Geoscience 337 (2005). 相似文献
18.
Evolution of the European Cenozoic Rift System: interaction of the Alpine and Pyrenean orogens with their foreland lithosphere 总被引：1，自引：0，他引：1
The evolution of the European Cenozoic Rift System (ECRIS) and the Alpine orogen is discussed on the base of a set of palaeotectonic maps and two retro-deformed lithospheric transects which extend across the Western and Central Alps and the Massif Central and the Rhenish Massif, respectively.During the Paleocene, compressional stresses exerted on continental Europe by the evolving Alps and Pyrenees caused lithospheric buckling and basin inversion up to 1700 km to the north of the Alpine and Pyrenean deformation fronts. This deformation was accompanied by the injection of melilite dykes, reflecting a plume-related increase in the temperature of the asthenosphere beneath the European foreland. At the Paleocene–Eocene transition, compressional stresses relaxed in the Alpine foreland, whereas collisional interaction of the Pyrenees with their foreland persisted. In the Alps, major Eocene north-directed lithospheric shortening was followed by mid-Eocene slab- and thrust-loaded subsidence of the Dauphinois and Helvetic shelves. During the late Eocene, north-directed compressional intraplate stresses originating in the Alpine and Pyrenean collision zones built up and activated ECRIS.At the Eocene–Oligocene transition, the subducted Central Alpine slab was detached, whereas the West-Alpine slab remained attached to the lithosphere. Subsequently, the Alpine orogenic wedge converged northwestward with its foreland. The Oligocene main rifting phase of ECRIS was controlled by north-directed compressional stresses originating in the Pyrenean and Alpine collision zones.Following early Miocene termination of crustal shortening in the Pyrenees and opening of the oceanic Provençal Basin, the evolution of ECRIS was exclusively controlled by west- and northwest-directed compressional stresses emanating from the Alps during imbrication of their external massifs. Whereas the grabens of the Massif Central and the Rhône Valley became inactive during the early Miocene, the Rhine Rift System remained active until the present. Lithospheric folding controlled mid-Miocene and Pliocene uplift of the Vosges-Black Forest Arch. Progressive uplift of the Rhenish Massif and Massif Central is mainly attributed to plume-related thermal thinning of the mantle-lithosphere.ECRIS evolved by passive rifting in response to the build-up of Pyrenean and Alpine collision-related compressional intraplate stresses. Mantle-plume-type upwelling of the asthenosphere caused thermal weakening of the foreland lithosphere, rendering it prone to deformation. 相似文献
19.
青藏高原风火山流域坡面尺度活动层土壤水热时空变化特征 总被引：3，自引：3，他引：0
以风火山流域某阴坡坡顶、 坡底和阳坡坡底活动层土壤水热及气象资料为基础, 对青藏高原多年冻土区不同地形条件下的土壤水热时空变化特征进行了分析。结果表明： 在融化阶段, 除表层5 cm外, 阴坡坡底各深度土壤开始融化日期均比坡顶早, 比阳坡坡底晚; 阴坡坡脚各深度土壤含水量均大于坡顶和阳坡坡底。在冻结阶段, 开始冻结日期在阴坡坡底均比坡顶早, 但比阳坡坡底晚; 阴坡坡底各深度土壤含水量均高于坡顶相应土层的含水量, 在20 cm、 100 cm、 160 cm深处高于阳坡相应土层的含水量, 但在5 cm、 50 cm深处, 稳定冻结后两者的含水量差异较小。在整个冻融过程中, 阴坡坡底土壤温度对气温变化的响应弱于坡顶及阳坡坡底, 但其土壤水分对降水的响应强于坡顶及阳坡坡底。植被生长发育受水分和热量条件的制约, 不同地形条件下水热时空变化差异将影响植被空间分布特征。在未来气候变暖情况下, 上坡位植被可能因为水分胁迫而退化, 出现荒漠化现象, 而下坡位由于受侧向流的影响, 土壤水分对降水的响应强烈, 植被不会发生显著退化; 在不同坡向之间, 同一坡位阳坡植被退化程度可能大于阴坡。 相似文献
20.
渭河中游宝鸡-扶风段北岸塬边集中发育大型黄土滑坡,体积超过1 000×104 m3的滑坡达58处。在区域活动断裂调查、地球物理勘察、典型斜坡结构与构造调查基础上,研究了大型滑坡结构及其形成机理。研究表明：渭河北缘活动断裂以地堑式结构控制北坡塬边斜坡的地貌,主断裂面倾向南,倾角平均为68°,而次级断面结构组合控制斜坡结构,影响塬边大型黄土滑坡结构;塬边主断裂面与多个大型黄土滑坡后缘滑壁一致,断裂最大下挫距离7.1 m,影响大型滑坡的形态及发生过程;活动断裂呈地堑式结构,局部次级断面控制塬边多级滑动面的结构及其演化过程,如杨家村滑坡,局部滑坡剪出受断裂结构控制,剪出口角度可达72°,大部分剪出口未受到断裂面影响,角度平均为23°;三门组黏土岩黏粒体积分数超过35%,塑限平均值为23,是滑坡的层间剪切带;降雨诱发老滑坡复活是目前新滑坡发育的主要形式,大量的老滑坡形成于0.009 Ma BP二级阶地侵蚀期,而古滑坡形成于0.13 Ma BP三级阶地侵蚀期。 相似文献